Brian Webb
|
3a1803b7a1
|
Added RFM22B (OPLink) receiver.
|
2012-12-13 21:07:19 -07:00 |
|
Brian Webb
|
8ead1200b9
|
RFM22B: Added timing synchronization on transmit to try to eliminate both sides transmitting at the same time. This now achieves virtually 0 re-transmissions for close range transmission while transmitting both full telemety and PPM at 64k.
|
2012-12-11 17:44:20 -07:00 |
|
Brian Webb
|
7f6a718354
|
RFM22B: Added optional debug signals on the telemetry port of the PipX. Also fixed a couple of bugs that were causing excessive re-transmissions (found using the debug signals).
|
2012-12-11 17:44:19 -07:00 |
|
Brian Webb
|
fecc23eb49
|
RFM22B/OPLink: Auto-configuration of remote com port now working.
|
2012-12-11 17:44:17 -07:00 |
|
Brian Webb
|
6ffe518509
|
RFM22B: Improved link stability, and added tracking of error encountered in the processes of transmitting and receiving.
|
2012-12-11 17:44:15 -07:00 |
|
Brian Webb
|
4cb311538a
|
RFM22B: Improved reliability, especially with reconnection after a timeout, although there is still too many resent packets.
|
2012-12-11 17:44:14 -07:00 |
|
Brian Webb
|
6ed9b63da9
|
RFM22B: Changing configuration parameters over-the-air working. Added tracking of Tx/Rx sequence number. Still seeing too many resent packets.
|
2012-12-11 17:44:11 -07:00 |
|
Brian Webb
|
0dce12e984
|
RFM22B: Finised handshacking on ACK and changed the link quality metric to use resent packets rather than missed packets.
|
2012-12-11 17:44:09 -07:00 |
|
Brian Webb
|
fa5f7a8fdd
|
RFM22B: All packets are now ACKed, and added a formal connection request / accept that will be used or auto-configuring the remote modem.
|
2012-12-11 17:44:06 -07:00 |
|
Brian Webb
|
98026966f7
|
RFM22B: Added PPM packets to rfm22 driver.
|
2012-12-11 17:44:04 -07:00 |
|
Brian Webb
|
bd42083376
|
RFM22B: Changed the way the frequencies and power settings are set for the rfm22b device.
|
2012-12-11 17:43:55 -07:00 |
|
Brian Webb
|
dae382564a
|
RFM22B/RM: Added rfm22b com device, moved remaining functionality in the radio module to the rfm22 driver, and simplified configuration of the PipX/OPLink. The radio device now presents itself completely as a com device, both in RadioComBridge (OPLink devices) and Telemetry (RM). Also change the PipXStatus and PipXSettings UAVOs to OPLinkStatus/OPLinkSettings.
|
2012-12-11 17:43:53 -07:00 |
|
Brian Webb
|
2541affd80
|
RFM22B: Added back configuration of the RF Power and RF Datarate. Also added setting of the destination ID in the rfm22b driver.
|
2012-10-04 16:39:07 -05:00 |
|
a*morale
|
be752b8075
|
Fixed some declaration to Exti functions to make it compile.
|
2012-09-30 17:04:36 +02:00 |
|
Brian Webb
|
a46e3cdec3
|
RFM22B: All outgoing data to the radio is now going through the PIOS_RFM22B_Send_Packet call. Also removed all global variables with the exception of the rx buffer.
|
2012-09-22 20:13:11 -07:00 |
|
Brian Webb
|
61200f01f5
|
RFM22B: Major refactoring of te RFM22B driver to implement a state machine for the driver. The state machine should now be complete, and the driver seems to be working pretty well on both the RM and the pipx.
|
2012-09-22 20:13:10 -07:00 |
|
Brian Webb
|
80509d264e
|
RFM22B: Start at cleaning up the processing interrupt handling, and starting to make it more of a state machine. Also removed the supervisor, which was causing unnecessary resets. The supervisor functionality is not in the the driver thread.
|
2012-09-22 20:13:08 -07:00 |
|
Brian Webb
|
fad32dcc29
|
Split out the PipX radio interface from RadioComBridge module to a separate Radio module. Now the RadioComBridge module just routes messages between the com ports and handles sending/receiving the PipX UAVOs.
|
2012-08-25 11:41:32 -07:00 |
|
Mike LaBranche
|
0ba8345c51
|
Merge branch 'next' into MikeL
Conflicts:
flight/Bootloaders/Revolution/inc/pios_config.h
flight/Modules/OveroSync/inc/overosync.h
flight/Modules/Sensors/inc/sensors.h
flight/PiOS/Boards/STM32F4xx_Revolution.h
flight/PiOS/STM32F4xx/pios_iap.c
flight/Revolution/System/inc/pios_config.h
ground/openpilotgcs/src/plugins/config/config.pro
ground/openpilotgcs/src/plugins/config/configccattitudewidget.cpp
ground/openpilotgcs/src/plugins/config/configvehicletypewidget.cpp
|
2012-06-04 16:59:31 -07:00 |
|
Brian Webb
|
62c5036220
|
Added PipXStatus and PipXSetting UAVobjects and some initial support for them.
|
2012-04-17 17:36:05 -07:00 |
|
Brian Webb
|
4936cd8fd2
|
Added PipXStatus and PipXSettings UAVObjects and added support the sending/receiving UAVTalk objects on the PipX.
|
2012-04-10 20:22:53 -07:00 |
|
Brian Webb
|
e639d173a0
|
Create ID from a hashed CPU serial number.
|
2012-04-07 19:41:23 -07:00 |
|
Brian Webb
|
ecdf150946
|
Moved RFM22B code from PipXtreme to pios_rfm22b.c driver. The radio is now passing data.
|
2012-03-18 10:22:05 -07:00 |
|
Brian Webb
|
b34b849453
|
Added start at a modified PipX packet handler.
|
2012-03-15 19:29:54 -07:00 |
|
Brian Webb
|
a0bdc58e5b
|
Added framework for rfm22b com device.
|
2012-02-28 21:30:06 -07:00 |
|