rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2025-01-10 20:52:11 +01:00
Code Issues Releases Activity
5,275 Commits 5 Branches 8 Tags
Commit Graph

1074 Commits

Author SHA1 Message Date
zedamota
246318af7b Mixer bug fix try 2011-09-22 12:02:22 +01:00
Nickolay
1af42e1b32 + notify table reordering some changes 2011-09-19 00:30:57 +03:00
Nickolay
1665ae8299 +reordering add some changes; 2011-09-19 00:26:49 +03:00
Oleg Semyonov
d923117c25 TxPID: optional module to tune PID settings using R/C transmitter 
This module will periodically update values of stabilization PID settings
depending on configured input control channels. New values of stabilization
settings are not saved to flash, but updated in RAM. It is expected that the
module will be enabled only for tuning. When desired values are found, they
can be read via GCS and saved permanently. Then this module should be
disabled again.
 2011-09-17 22:49:51 +03:00
unknown
56e71cd82e +removed public members in notificationitem; +cosmetic changes; +fixed indentation; 2011-09-16 18:39:20 +03:00
Nickolay
c16e386e63 +reordering of table items - experimenting with D&D 2011-09-16 02:24:35 +03:00
Nickolay
e14e0a763b - temporary remove assert in finished callback; 2011-09-15 01:35:19 +03:00
Nickolay
3af398d7f9 initial changes 2011-09-15 00:38:18 +03:00
James Cotton
1783817b96 INS: First pass at altitude hold code 2011-09-13 01:44:53 -05:00
James Cotton
535449baa9 Merge branch 'next' into ins 2011-09-12 22:41:19 -05:00
James Cotton
06fc5a1110 Input Configuration: Fix flight mode slider detection (looking at wrong channel 
number).
 2011-09-12 22:28:28 -05:00
James Cotton
400ba3bd47 Merge branch 'next' into ins 2011-09-12 18:57:11 -05:00
James Cotton
6bd52832be Heli configuration: Now the collective passthrough uses the collective channel 
only.  Please note this requires all heli users to scrub their settings and
start over.  Please erase your setting and be careful.  Remove all blades.
 2011-09-12 11:47:59 -05:00
James Cotton
6457276438 Merge branch 'input_configuration' into next 2011-09-11 18:52:35 -05:00
Oleg Semyonov
f5369f9338 Input Configuration: support all 18 S.Bus input channels 2011-09-12 02:06:50 +03:00
James Cotton
5d43a8dd36 Input configuration; Remove some old unused variables 2011-09-11 12:24:48 -05:00
James Cotton
3ff7bf7ed0 Input Configuration: Make sure the input channel form always is properly 
aligned.  I hope the fixed size behaves well across platforms.
 2011-09-11 12:11:15 -05:00
James Cotton
ce1c56260d Input Configuration: Refacfor the code a lot to clear up handling the state and 
transitions to make back and cancel a bit more reliable.
 2011-09-11 12:11:02 -05:00
James Cotton
01cd2ded57 Mainboard config: The rcvr port is used for PPM/PWM/Spektrum so make these one 
setting that is mutually exclusive.
 2011-09-10 14:20:51 -05:00
James Cotton
c2a8cc3faa Mainboard config: The rcvr port is used for PPM/PWM/Spektrum so make these one 
setting that is mutually exclusive.
 2011-09-10 14:19:12 -05:00
James Cotton
3239fdf21b Merge branch 'next' into ins 
Conflicts:
	flight/CopterControl/Makefile
	flight/OpenPilot/System/pios_board.c
	flight/Project/OpenPilotOSX/OpenPilotOSX.xcodeproj/project.pbxproj
 2011-09-09 08:33:34 -05:00
James Cotton
a5509965b2 Input configuration: add reverse checkbox and label for current neutral value 2011-09-09 00:54:47 -05:00
James Cotton
1a2750051a Input wizard: Make collective pitch come first for helicopter mode transmitters 
and tell person to use throttle hold so it's detected correctly.
 2011-09-08 10:24:52 -05:00
James Cotton
bbdb176409 Input configuration: Make input channel into a dropdown box and make the 
neutral position into a slider.  During calibration the slider moves and the
min and max values are updated appropriately.  Also make the collective channel
skippable in the configuration wizard.
 2011-09-07 02:13:27 -05:00
James Cotton
cabfbc229d Input config: Bring back old style calibration. I can't seem to make the input 
widget list a class variable which isn't very safe (multipe instances of the
config gadget will act funny).
 2011-09-06 22:19:12 -05:00
James Cotton
d496f81c68 GCS Input config: Change the layout a bit to make the spacing between rows 
regular, and move some of the layout to the .ui file.
 2011-09-06 17:50:55 -05:00
James Cotton
acfb28b04b Heli configuration: Make swashplate leveling routine using static accessor 
methods.  Also got rid of incredibly annoying message when you tried to alt-tab
out of GCS.
 2011-09-04 23:08:35 -05:00
James Cotton
a81f14a575 CCPM config: Fix the collective pass through mode for multi receiver support. 
Now the user must configure Accessory# in the input configuration section
though.
 2011-09-04 23:08:34 -05:00
James Cotton
6344bc8f83 Fix encoding no configccpmwidget.cpp 2011-09-04 23:08:34 -05:00
James Cotton
d28f0c4c78 GCS Config Stabilization: Increase maximum rate that can be entered to 500 
deg/s from 300 deg/s for heli people.
 2011-09-03 21:25:27 -05:00
James Cotton
e18288085c OP-390 Make the object saving throw an error message on save failures. 2011-09-03 21:25:20 -05:00
James Cotton
1de58ebb87 Make scope gadget check if object exists before using it. Avoids segfaults 
when scoped objects disappear.
 2011-09-03 21:24:13 -05:00
James Cotton
5a9da23615 Make the object saving throw an error message on save failures. 2011-09-02 13:26:28 -05:00
James Cotton
1d04715476 INS: Rework how the sensor calibration behaves and clean up the interface a 
bit.
 2011-09-02 13:24:35 -05:00
James Cotton
3b20df22d1 Updates to config gadget for new INS objects 
Make scope gadget check if object exists before using it.  Avoids segfaults
when scoped objects disappear.
 2011-09-01 12:21:37 -05:00
James Cotton
612d3336b4 This patch breaks backward compatibility with AHRS solidly. 
Move the configuration files for INS from AHRS* to INS*.  Strip out unused
fields in settings and merge calibration and settings since settings has
basically no information.
 2011-09-01 12:21:33 -05:00
Stacey Sheldon
a72c657e21 rcvr activity: Speed up activity acquisition 
Activity detection logic can now move through
the active receivers more quickly.
 2011-08-27 20:17:56 -04:00
James Cotton
dc340596f5 Merge branch 'next' into GCS_ChangesToUI-RuntimeCFG 
Conflicts:
	flight/CopterControl/Makefile
	flight/OpenPilot/System/pios_board.c
	flight/OpenPilot/UAVObjects.inc
	flight/PiOS/STM32F10x/pios_spektrum.c
	ground/openpilotgcs/src/plugins/config/config.pro
	ground/openpilotgcs/src/plugins/config/configgadget.qrc
	ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
	shared/uavobjectdefinition/hwsettings.xml
 2011-08-27 15:26:05 -05:00
Corvus Corax
4bd72923e5 Merge branch 'CorvusCorax_unidirectional-GPS-com' into CC_GPS 
Conflicts:
	flight/Modules/GPS/GPS.c
	flight/Modules/GPS/GTOP_BIN.c
	flight/Modules/GPS/NMEA.c
	shared/uavobjectdefinition/hwsettings.xml
 2011-08-25 15:33:23 +02:00
James Cotton
fb689221fa Merge remote-tracking branch 'origin/GCS_UIFixes_Dmytro' into next 2011-08-23 22:36:40 -05:00
zedamota
0d92e00125 Several bugfixes. 
Created "simple wizard" button witch bypasses the sticks identification screen.
Small bugfix to fix GCS crashing if trying to upload a firmware bigger then the HW capacity.
 2011-08-23 11:25:28 +01:00
Dmytro Poplavskiy
ed51756191 Compilation fix on mac 
It's safer to define GL_CLAMP_TO_EDGE if not available than
to include GL/glext.h.
 2011-08-22 09:10:25 +10:00
Dmytro Poplavskiy
6e506161e0 Compilation fix 
It's necessary to include GL/glext.h on windows for
GL_CLAMP_TO_EDGE define.
 2011-08-22 07:34:59 +10:00
Dmytro Poplavskiy
69d5e7fe7e Added missing Q_DECL_EXPORT to CachedSvgItem 2011-08-21 23:40:11 +10:00
Dmytro Poplavskiy
6b0da6bc72 Changed PFDGadgetWidget to use CachedSvgItem 2011-08-21 21:38:58 +10:00
Dmytro Poplavskiy
bbc137eabe Added initial CachedSvgItem implementation 
Texture is regenerated each time item is scaled
but it's reused during rotation, unlike the default
DeviceCoordinateCache mode.
 2011-08-21 21:36:41 +10:00
Dmytro Poplavskiy
b6b0703c28 GCS: Fixed stabilization settings layout on a small screen. 
Put most of widgets into QScrollArea.
It looks the same on large enough screen but scrollbars
are added on netbook size screen.
 2011-08-21 19:57:21 +10:00
zedamota
7bf9f4e817 Untested changes, should fix: 
Spelling mistakes
Show inverted movement as soon as checkbox is checked.
Bring back flightmode change messagebox.
Layout issues (this was not a issue on win so not sure its fixed).
Support for flightmode binary switches neutral=min+(max-min)/2.
Flightmode slider not changing according to command.
Mode 1 roll on the right (still think it doesn't make sense :) )
 2011-08-20 19:10:28 +01:00
James Cotton
368323fd59 Merge remote-tracking branch 'origin/james/erase_settings' into next 2011-08-20 13:07:01 -05:00
Corvus Corax
dfd301571a HWSettings: Allow late Initialization and Start of Modules as defined in Makefile(available modules) and UAVObject(actually started modules) 2011-08-20 01:24:06 +02:00