Philippe Renon
03b3dca76c
OP-1122 OP-1145 flight telemetry improvement
...
- create periodic queue events only for periodically updated uavobjects
- made error handling more robust
- added a FIXME concerning FlighTelemetryStats as it is updated peridocally using two separate mechanisms
2014-01-06 21:48:34 +01:00
Philippe Renon
5f33fadb1b
OP-1122 OP-1145 flight side uavtalk and telemetry enhancements
...
- added more stats (bytes, sync errors, crc errors)
- made error handling more robust
- added some optional PIOS_DEBUGLOG calls
- fixed a timestamp handling bug
2013-12-19 00:17:08 +01:00
Corvus Corax
951c7bfea0
removed redundant code from Telemetry
2013-11-17 22:20:19 +01:00
Corvus Corax
0e502d3734
Modified queue creation for telemetry and logging
...
event queues are now created for all uavobjects for both telemetry and
logging, so later modifications from manual to periodic are possible
2013-11-17 22:10:03 +01:00
Corvus Corax
243e261411
UAVObject logging through telemetry module and uavobjectmanager
2013-11-17 17:15:23 +01:00
Brian Webb
2aea2342ab
OP-932 Adds a direct PPM channel on each Tx packet when in PPM mode, and adds a PPM only mode that uses a 9600 bps air datarate. Also updates the OPLink configuration tab and moves all OPLink configuration to the OPLink configuration tab on the Revo, and customizes the OPLink configuration tab for the Revo.
2013-06-26 18:01:54 -07:00
Brian Webb
f8d60e6dee
OP-932 Adds additional thread and UAVTalk connection to the telemetry module that reads from the uart/radio link on the Revo. This allows the Revo to read OAVObjects over both the uart/radio link and the USB link at the same time. Unfortunately, there's no way to know which link to send UAVObjects out on, so all UAVObjects go to the USB port if USB is connected. This allows UAVObjects to be received from the OPLink radio, even when USB is connected.
2013-06-26 17:58:02 -07:00
Mathieu Rondonneau
23b2907d08
OP-976: Add the ';' back
...
This compile successfuly with make all_flight
2013-06-03 20:37:40 -07:00
Sexy Pony
900f643bbd
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
2013-05-19 17:37:30 +03:00
Richard Flay (Hyper)
fbc8bc698f
OP-936: Merges branch 'next' into hyper/OP-936_task-monitor-rework, fixes damage/conflicts,
...
and brings the callback scheduler into the fold.
+review OPReview-461
2013-05-06 19:11:14 +09:30
Richard Flay (Hyper)
a2d8544931
OP-931: adds -Wextra compiler option for the flight code, and makes the bazillion code changes required
...
to make the flight code compile again. Needs careful review, particularly all the fixes for the
signed vs unsigned comparisons.
+review OPReview-459
2013-05-05 16:32:24 +09:30
Richard Flay (Hyper)
84e1a81f8b
OP-936: Moves the task monitor code out of the flight library and into PiOS.
...
This move and rework also breaks the dependency of the task monitor on the UAVO subsystem,
and pushes the responsibility for updating the TaskInfo UAVO into the System module.
+review OPReview
2013-05-03 07:01:14 +09:30
Richard Flay (Hyper)
7937ae6296
OP-931: Makes flight code compile with -Wfloat-equal and -Wunsuffixed-float-constants enabled.
...
Also fixes warnings (and bugs) in F4 STM32_USB_OTG_Driver code, allowing -Werror to be enabled for all flight code.
Fixes all other compiler warnings that would otherwise cause the flight code to not compile with -Werror enabled.
Along the way, this also adds some uses of isnan() to various places rather than questionable tests for x != x and
x == x to check for NaNs.
+review OPReview
2013-04-30 20:36:42 +09:30
Oleg Semyonov
66db978244
Rename Libraries->libraries, Modules->modules
2013-04-25 13:13:36 +03:00
