Alessio Morale
2497b3d605
REVONANO - some cleanup
2015-05-18 21:30:02 +02:00
Alessio Morale
895540974a
REVONANO - Disable Sensitivity Adjustment values.
2015-05-18 21:30:01 +02:00
Alessio Morale
43f04a340b
OP-1658 - MPU9250 support for sensor "reset", fix temperature measurement
2015-05-18 21:30:01 +02:00
Alessio Morale
174340d8bf
OP-1658 - Various fixes for MPU9250
2015-05-18 21:30:01 +02:00
Alessio Morale
928f1385ec
OP-1658 - MPU9250 sensor device model implementation
2015-05-18 21:30:00 +02:00
Laurent Lalanne
f82a584eb2
REVONANO mpu9250 driver fix for Mag orientation
2015-05-18 21:29:57 +02:00
Alessio Morale
1d7c1b2fc9
REVONANO - Change target to 411, fix ram and flash extents, raise clock to 96MHz (cannot do 100 because of USB) , cleanup spl
2015-05-18 21:29:57 +02:00
Alessio Morale
15e7286078
MPU9K - merge 9k and 6k settings into a single uavo
2015-05-18 21:29:56 +02:00
Alessio Morale
3563b1ff0e
REVONANO - Prevent modules to start before init: move most code to pios_initcall.h. System and system-Like modules
2015-05-18 21:29:56 +02:00
Stefan Karlsson
efb6855f6f
REVONANO - Various temp fixes debug code to get nano to read from the flash. Code has been added to make the execution of systemTask wait until initTask has completed.
...
Conflicts:
flight/pios/common/pios_flashfs_objlist.c
2015-05-18 21:29:56 +02:00
Alessio Morale
288c9019d1
uncrustify
2015-05-18 21:29:55 +02:00
Alessio Morale
51094ba95d
REVONANO - Minor cleanup of MPU9250 driver
2015-05-18 21:29:55 +02:00
Alessio Morale
d2dae79c82
REVONANO - update SPL to 1.4.0 that adds support for f411
2015-05-18 21:29:55 +02:00
Mathieu Rondonneau
66b06e4c9a
REVONANO - Add MPU9250 support
2015-05-18 21:29:42 +02:00
Alessio Morale
fb11b312c5
REVONANO - Flash fs fixes
2015-05-18 21:26:40 +02:00
Alessio Morale
632a14023c
REVONANO - exclude ccram stuffs
2015-05-18 18:55:26 +02:00
Alessio Morale
5c13551a1a
REVONANO - Add support for eeprom and objlist fs
2015-05-18 18:55:25 +02:00
Alessio Morale
8b11861c63
REVONANO - Readd old objlist FS to be used with EEPROM
2015-05-18 18:55:25 +02:00
Alessio Morale
1e1195ec05
REVONANO - Add Eeprom support
2015-05-18 18:55:25 +02:00
Alessio Morale
764a15999f
REVONANO - Make FlashFS_Logfs optional, remove old onchip eeprom files
...
Conflicts:
flight/targets/boards/coptercontrol/firmware/Makefile
2015-05-18 18:55:21 +02:00
Alessio Morale
76ad80fdf5
Revert "objlist: remove now unused objlist flash filesystem"
...
Bring them back to the right path
This reverts commit d89a9b1b6cd9372eac1a20cb23fd9de144d125eb.
2015-05-18 18:54:52 +02:00
Alessio Morale
805750050c
REVONANO - Support distinct remaps for SDA and SCL
2015-05-18 18:54:52 +02:00
Alessio Morale
375f23ff0c
REVONANO - Make debuglog, FlashFS and other bits optional
2015-05-18 18:54:50 +02:00
Alessio Morale
690e04f4f0
REVONANO - Initial board support
2015-05-18 18:52:09 +02:00
Alessio Morale
6d6be75605
REVONANO - Update SPL to 1.3.0
2015-05-18 18:48:18 +02:00
Alessio Morale
b59408863a
REVONANO - Allows per board linker scripts
2015-05-18 18:48:17 +02:00
abeck70
2c3fcd64d1
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into laurent/OP-1869_Analog_airspeed_scaling
2015-05-14 20:21:40 +10:00
Laurent Lalanne
8e8d08c4a1
OP-1869 "scale" lower case
2015-05-13 21:55:18 +02:00
Steve Evans
1771d347bb
Merge branch 'steve/OP-1803_s.bus_dropped_frames' into steve/OP-1849_flexio_com_bridge
2015-05-13 20:36:06 +01:00
Steve Evans
fd00cd8210
Merge branch 'next' into steve/OP-1803_s.bus_dropped_frames
2015-05-13 20:29:54 +01:00
abeck70
92e50c2ead
OP-1810 FOC
...
Squashed commit for clean commit as discussed in code review
Uncrustify
2015-05-13 17:19:51 +10:00
Steve Evans
6e6b8c8bad
Merge branch 'steve/OP-1803_s.bus_dropped_frames' into steve/OP-1849_flexio_com_bridge
2015-05-08 07:43:16 +01:00
Steve Evans
023f157ba8
OP-1803 Disable untested DSM link quality code
2015-05-08 07:42:32 +01:00
Laurent Lalanne
11e83bd0e8
OP-1869 Analog Airspeed sensor : Allow scale (voltage divider), change alpha/LowPassFilter behavior
2015-05-01 13:00:36 +02:00
m_thread
8d4fe80388
OP-1837 Uncrustify
2015-04-26 21:08:54 +02:00
Steve Evans
e89356deb2
OP-1849 Invert DTR and initialise
2015-04-26 14:18:40 +01:00
m_thread
b0b1a42aec
OP-1837 This change adds support for the Multiplex SRXL v1 and v2 protocols.
...
Protocol version is autodetected and 12 or 16 channels are supported.
SRXL is available on Flexiport of Revolution board.
2015-04-26 15:04:52 +02:00
m_thread
f11285ea16
Added new helper macros to performance counters.
2015-04-26 14:33:25 +02:00
Steve Evans
7445add280
OP-1849 Hooks all in place for CDC line state changes to drive port GPIO for DTR
2015-04-26 03:05:47 +01:00
Steve Evans
7f93340f7f
OP-1849 Initial commit
2015-04-24 22:46:07 +01:00
James Duley
00818f3161
OP-1851 Missing static keyword:
...
Added static to header functions that were missing it
2015-04-22 11:27:47 +12:00
Steve Evans
79339d677f
Merge branch 'steve/OP-1803_s.bus_dropped_frames' into steve/OP-1849_update_minimosd_via_usb
2015-04-21 07:44:50 +01:00
Steve Evans
d28831008f
OP-1803 Return link quality of zero rather than throw an exception if no receiver if the receiver port is undefined
2015-04-20 21:40:42 +01:00
Alessio Morale
ab36dcbdee
Merge remote-tracking branch 'origin/rel-15.02.02' into next
2015-04-20 14:54:07 +02:00
Alessio Morale
1162c0afb2
Merge remote-tracking branch 'origin/master' into next
2015-04-20 14:53:13 +02:00
Alessio Morale
061ef1e377
Merge remote-tracking branch 'origin/amorale/OP-1828_optional_analog_inputs' into next
2015-04-20 12:08:34 +02:00
Steve Evans
b87a1c1fa6
OP-1803 Enable DSM link quality so testers have something to work with
2015-04-19 18:41:04 +01:00
Mathieu Rondonneau
9cb0926009
OP-1804: Add realloc.
2015-04-16 22:52:09 -07:00
Alessio Morale
3a772e1828
OP-1828 - Add support for optional analog inputs
...
Optional analog inputs are not initialized at ADC module startup.
Calling PIOS_ADC_PinSetup(uint32_t pin) setups them as analog input at a later stage.
2015-04-09 00:25:53 +02:00
Steve Evans
73aeb5d653
OP-1803 Report link quality for OPLink
2015-04-04 22:02:54 +01:00
