Alessio Morale
|
d3569927a0
|
OP-1404 fix unit scaling for pvt, use check_msgtracker,
|
2014-08-04 11:04:35 +02:00 |
|
Alessio Morale
|
6f4b1d5c03
|
OP-1404 uncrustify
|
2014-08-03 15:27:30 +02:00 |
|
Alessio Morale
|
c68dd3c00e
|
OP-1404 - PVT will provide SOL+VELNED+POSLLH+Time. DOP will provide all dop values
|
2014-08-03 15:04:40 +02:00 |
|
Alessio Morale
|
1dd05c24cc
|
OP-1404 - Fix compilation with PIOS_GPS_MINIMAL defined
|
2014-08-03 12:50:42 +02:00 |
|
Alessio Morale
|
0976fb6e1b
|
OP-1404 - Add support for UBlox PVT sentence
|
2014-08-03 12:50:21 +02:00 |
|
Alessio Morale
|
016ba6940d
|
OP-1403 - drop attitude/revolution as it has been supersede by StateEstimation module
|
2014-08-02 20:48:56 +02:00 |
|
Alessio Morale
|
d856bbdb50
|
OP-1403 - Update targets
|
2014-08-02 20:48:48 +02:00 |
|
Alessio Morale
|
6a3cb7b808
|
OP-1403 - Add support for multiple hmc* devices
|
2014-08-02 20:48:41 +02:00 |
|
Alessio Morale
|
57a43a5587
|
OP-1403 - Migrate to new HMC5x83 driver and remove old HMC5883 one
|
2014-08-02 20:48:34 +02:00 |
|
Alessio Morale
|
2a8429320d
|
OP-1403 - Support HMC5983 temperature sensor/compensation
|
2014-08-02 20:48:24 +02:00 |
|
Alessio Morale
|
3c1b689224
|
OP-1403 - Add generic I2C/SPI HMC5x83 mag driver
|
2014-08-02 20:48:16 +02:00 |
|
Alessio Morale
|
6884e9f378
|
Merge remote-tracking branch 'origin/amorale/OP-1395_flight_log_enhancements' into next
|
2014-08-02 20:41:58 +02:00 |
|
Alessio Morale
|
e5b52d46d9
|
Merge remote-tracking branch 'origin/amorale/OP-1358_add_separate_rotation_calibration_offset_revo_only' into rel-14.06
|
2014-07-24 23:47:14 +02:00 |
|
Corvus Corax
|
a199fd1cb0
|
OP-1412 do not dicard mags after init
|
2014-07-23 22:40:43 +02:00 |
|
Corvus Corax
|
95799cf11b
|
OP-1412 delay ekf initialization until magnetometers are reporting valid data
|
2014-07-22 23:49:41 +02:00 |
|
Alessio Morale
|
9bee143476
|
OP-1358 Revo:Implement roll/pitch trim settings separated from "nominal" board rotation settings
|
2014-07-21 11:01:07 +02:00 |
|
Alessio Morale
|
62755c4cab
|
unrustify
|
2014-07-16 20:39:12 +02:00 |
|
Alessio Morale
|
25c54ac16d
|
Merge remote-tracking branch 'origin/laurent/OP-1063_Multi_config_Hexa_fixes' into rel-14.06
|
2014-07-16 20:07:31 +02:00 |
|
Laurent Lalanne
|
1b447ee644
|
OP-1063 Multi_config_Hexa_fixes Stupid typo error with OctoX in VtolPathFollower.
|
2014-07-14 23:29:48 +02:00 |
|
Laurent Lalanne
|
c26e33964a
|
OP-1063 Multi_config_Hexa_fixes Added OctoX, define new mixer table for Octo(p) and OctoX. New motor definition for OctoX (NNE, ENE...) Fixes for svg frames. Defined default settings for OctoP/X in setupwizard (but disabled)
|
2014-07-13 13:58:18 +02:00 |
|
Laurent Lalanne
|
a46480a99b
|
OP-1063 Multi_config_Hexa_fixes : Added real HexaX, renamed HexaX > HexaH
Added artwork in config and wizard svg. Cleanup on svg connection diagram (layers)
DO NOT USE until mixers are fixed
|
2014-07-10 06:01:28 +02:00 |
|
Alessio Morale
|
6c38eda192
|
OP-1395 - Reset log num when changing flight num. fix flight num update logic
|
2014-07-09 23:05:38 +02:00 |
|
Alessio Morale
|
61d26d7fd8
|
op-1395 - automatically increment flight number after disabling log.
|
2014-07-09 08:39:32 +02:00 |
|
Alessio Morale
|
03d03cfb06
|
OP-1395 add a vTaskDelay when waiting for dma transfer to complete when using FreeRTOS.
|
2014-07-08 02:54:17 +02:00 |
|
Alessio Morale
|
711c3609b6
|
OP-1395 - Add support for Fast read, explicitly set SPI clock speed to maximum allowed by all parts used
|
2014-07-08 02:53:25 +02:00 |
|
Alessio Morale
|
55b325966a
|
OP-1395 - Pack several objects on a single Debug Log "slot", after ten consecutive failures (log full) gives up trying to save to prevent wasting time. Use PIOS_Delay for timestamp
|
2014-07-08 02:47:09 +02:00 |
|
rodneygrainger
|
3aaf1a3367
|
OP-1391 - Fix to prevent arming if unsafe due to current Thrust Mode (Altitude Hold/Vario)
|
2014-07-07 20:47:23 +12:00 |
|
Alessio Morale
|
4389f767f3
|
uncrustify
|
2014-07-02 23:27:58 +02:00 |
|
Corvus Corax
|
80d3d7c954
|
OP-1374 hotfix to filtercf on checking of magnetometer calibration fabsf()
|
2014-06-29 18:36:46 +02:00 |
|
Alessio Morale
|
30491c7992
|
OP-1374 - Autostart the relevant PathFollower for known frame types
|
2014-06-29 17:23:57 +02:00 |
|
Alessio Morale
|
3ae85f6434
|
OP-1374 - Issue a Boot Alarm (reboot) if frame type is changed
|
2014-06-29 17:23:15 +02:00 |
|
Alessio Morale
|
52a909185b
|
OP-1374 - Add sanitycheck API to detect frame type
|
2014-06-29 17:22:41 +02:00 |
|
Alessio Morale
|
1b823b7b92
|
Merge remote-tracking branch 'origin/Bertrand/OP-1308_Set_Same_Logic_To_Alarms' into next
Conflicts:
flight/libraries/sanitycheck.c
flight/modules/StateEstimation/filtermag.c
flight/modules/System/systemmod.c
|
2014-06-26 20:31:27 +02:00 |
|
Alessio Morale
|
4e3a68ac6c
|
uncrustify
|
2014-06-22 20:34:04 +02:00 |
|
Alessio Morale
|
c6a773363f
|
Merge branch 'amorale/OP-943_add_malloc_for_ccsram' into next
Conflicts:
flight/pios/common/pios_adxl345.c
make/apps-defs.mk
|
2014-06-22 19:31:03 +02:00 |
|
Alessio Morale
|
a03ad41bab
|
Merge branch 'amorale/OP-1365_pios_instrumentation' into next
Conflicts:
flight/modules/Attitude/attitude.c
|
2014-06-22 19:13:46 +02:00 |
|
Alessio Morale
|
263fd64ab5
|
Merge branch 'amorale/OP-1274_freertos_v8.0.0' into next
|
2014-06-22 16:06:21 +02:00 |
|
Alessio Morale
|
f30dd414ac
|
Merge branch 'amorale/OP-1227_cc_high_cpu_utilization' into next
|
2014-06-22 16:06:08 +02:00 |
|
Corvus Corax
|
3f11f4f6b2
|
OP-1371 fix for hitl: turn of receiver alarm if in gcs control mode (but set warning)
|
2014-06-18 22:46:44 +02:00 |
|
Corvus Corax
|
f1b7f339b6
|
OP-1371 setting to disable sanity checks for debugging and testing - will set config alarm to warning if set
|
2014-06-18 21:39:16 +02:00 |
|
Corvus Corax
|
b40a114a0a
|
OP-1371 treat hitl as nav capable fusion algorithm if positionstate is set by sim
|
2014-06-18 21:29:55 +02:00 |
|
Alessio Morale
|
fa24d21237
|
OP-1365 fix comments
|
2014-06-18 02:01:16 +02:00 |
|
Alessio Morale
|
eb5deb3eca
|
OP-1274 Remove unneeded cast from task name in xTaskCreate call
|
2014-06-18 01:47:43 +02:00 |
|
Alessio Morale
|
aa71df2831
|
OP-943 fix ut_
|
2014-06-12 06:53:07 +02:00 |
|
Alessio Morale
|
61f71add4c
|
OP-943 add missing pios_mem.c from previous commit
|
2014-06-11 23:54:28 +02:00 |
|
Alessio Morale
|
b3b90f1f66
|
OP-943 inline pios_mem function have issues with simposix.
|
2014-06-11 22:15:40 +02:00 |
|
Alessio Morale
|
6226aec2a7
|
OP-943 uses pios_mem API for heap allocation
|
2014-06-11 22:15:40 +02:00 |
|
Alessio Morale
|
50bef2dc12
|
OP-943 change make scripts to defines automatically PIOS_TARGET_PROVIDES_FAST_HEAP when available
|
2014-06-11 22:15:40 +02:00 |
|
Alessio Morale
|
d8f08a7916
|
OP-943 Add Malloc for "FastHeap" (ccsram)
- Use a separate mallocs for thread stack and RTOS structures heap
- Add a pios_mem API to be able to use fast ram (CCM) when available
|
2014-06-11 22:15:30 +02:00 |
|
Alessio Morale
|
622519b7c2
|
OP-1365 Flight code instrumentation API: add documentation to pios_instrumentation_helper, uncrustification
|
2014-06-10 22:13:20 +02:00 |
|