Kevin Finisterre 9e417f5ee5 Remove some redundant "elevon" stuff for now. Will come back later when proper "elevon + rudder" artwork exists. Currently no different from vtail anyway... ...

Enabled proper channel mixing settings inside the FixedWing wizard Output configuration screen. Attempt to set GUIConfigDataUnion to fixedwing

2013-12-18 12:57:35 -05:00

..

cfg_vehicletypes

Remove some redundant "elevon" stuff for now. Will come back later when proper "elevon + rudder" artwork exists. Currently no different from vtail anyway...

2013-12-18 12:57:35 -05:00

images

I fixed the first screen, now the vtail and aileron models show when slected. For some reason I am unable to move beyond the first wizard screen.

2013-11-25 01:06:07 -05:00

airframe_ccpm.ui

OP-907 step 4: vehicle config UI cleanups

2013-04-13 17:58:11 +02:00

airframe_custom.ui

OP-907 step 4: vehicle config UI cleanups

2013-04-13 17:58:11 +02:00

airframe_fixedwing.ui

just trying to cleanup a bad push from last night. I stomped on some things I should not have.

2013-12-15 03:38:12 -05:00

airframe_ground.ui

OP-907 vehicle config widgets now have consistent labels for mixer sliders

2013-04-16 00:13:08 +02:00

airframe_multirotor.ui

OP-907 vehicle config widgets now have consistent labels for mixer sliders

2013-04-16 00:13:08 +02:00

airframe.ui

Merge remote-tracking branch 'origin/filnet/OP-907_gcs_vehicle_config_overhaul' into next

2013-05-01 13:01:55 +02:00

alignment-calibration.cpp

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

assertions.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

autotune.ui

AutoTune UI: add warning to reboot the board (something is better than nothing)

2012-11-14 17:49:37 +02:00

calibration.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

camerastabilization.ui

Reset executable bits from non-executable files (Windows legacy)

2013-04-24 01:18:46 +03:00

cc_hw_settings.ui

Reset executable bits from non-executable files (Windows legacy)

2013-04-24 01:18:46 +03:00

ccattitude.ui

OP-989 Changed layout for CC/CC3D Attitude configuration page. Renamed AccelTau to Accelerometer filtering. Updated tool tips for both CC/CC3D and Revolution pages.

2013-06-06 11:21:30 +02:00

ccpm_old.ui

OP-907 step 2: moved vehicle specific code to respective vehicle widget

2013-04-13 17:58:03 +02:00

config_cc_hw_widget.cpp

[OP-835] Qt 5.1.0 - migrated GCS plugins

2013-09-15 23:37:20 +02:00

config_cc_hw_widget.h

[OP-835] Qt 5.1.0 - migrated GCS plugins

2013-09-15 23:37:20 +02:00

config_dependencies.pri

Moved framework to its own plugin

2012-02-05 18:16:38 +00:00

config_global.h

Moved framework to its own plugin

2012-02-05 18:16:38 +00:00

Config.pluginspec

OP-772: Normalize line endings

2013-04-05 23:46:56 +03:00

config.pri

Moved framework to its own plugin

2012-02-05 18:16:38 +00:00

config.pro

OP-1103 Some minor cleanup work and adding a version check for Qt5.1

2013-11-13 21:04:57 +11:00

configautotunewidget.cpp

[OP-835] Qt 5.1.0 - migrated GCS plugins

2013-09-15 23:37:20 +02:00

configautotunewidget.h

[OP-835] Qt 5.1.0 - migrated GCS plugins

2013-09-15 23:37:20 +02:00

configcamerastabilizationwidget.cpp

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

configcamerastabilizationwidget.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

configccattitudewidget.cpp

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

configccattitudewidget.h

[OP-835] Qt 5.1.0 - migrated GCS plugins

2013-09-15 23:37:20 +02:00

configfactory.h

CC-33 Now the config panel only shows the relevant panel once the board is connected.

2011-03-29 20:32:09 +00:00

configgadget.cpp

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

configgadget.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

configgadget.qrc

I fixed the first screen, now the vtail and aileron models show when slected. For some reason I am unable to move beyond the first wizard screen.

2013-11-25 01:06:07 -05:00

configgadgetfactory.cpp

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

configgadgetfactory.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

configgadgetwidget.cpp

[OP-835] Qt 5.1.0 - migrated GCS plugins

2013-09-15 23:37:20 +02:00

configgadgetwidget.h

[OP-835] Qt 5.1.0 - migrated GCS plugins

2013-09-15 23:37:20 +02:00

configinputwidget.cpp

[OP-835] Qt 5.1.0 - migrated GCS plugins

2013-09-15 23:37:20 +02:00

configinputwidget.h

[OP-835] Qt 5.1.0 - migrated GCS plugins

2013-09-15 23:37:20 +02:00

configoutputwidget.cpp

[OP-835] Qt 5.1.0 - migrated GCS plugins

2013-09-15 23:37:20 +02:00

configoutputwidget.h

[OP-835] Qt 5.1.0 - migrated GCS plugins

2013-09-15 23:37:20 +02:00

configpipxtremewidget.cpp

[OP-835] Qt 5.1.0 - migrated GCS plugins

2013-09-15 23:37:20 +02:00

configpipxtremewidget.h

OP-932 Adds a direct PPM channel on each Tx packet when in PPM mode, and adds a PPM only mode that uses a 9600 bps air datarate. Also updates the OPLink configuration tab and moves all OPLink configuration to the OPLink configuration tab on the Revo, and customizes the OPLink configuration tab for the Revo.

2013-06-26 18:01:54 -07:00

configplugin.cpp

[OP-835] Qt 5.1.0 - migrated GCS plugins

2013-09-15 23:37:20 +02:00

configplugin.h

uncrustification for ground/openpilotgcs/src/plugins/config/configplugin.h

2013-11-16 17:34:40 +01:00

configrevohwwidget.cpp

OP-932 Adds a direct PPM channel on each Tx packet when in PPM mode, and adds a PPM only mode that uses a 9600 bps air datarate. Also updates the OPLink configuration tab and moves all OPLink configuration to the OPLink configuration tab on the Revo, and customizes the OPLink configuration tab for the Revo.

2013-06-26 18:01:54 -07:00

configrevohwwidget.h

[OP-835] Qt 5.1.0 - migrated GCS plugins

2013-09-15 23:37:20 +02:00

configrevohwwidget.ui

OP-932 Adds a direct PPM channel on each Tx packet when in PPM mode, and adds a PPM only mode that uses a 9600 bps air datarate. Also updates the OPLink configuration tab and moves all OPLink configuration to the OPLink configuration tab on the Revo, and customizes the OPLink configuration tab for the Revo.

2013-06-26 18:01:54 -07:00

configrevowidget.cpp

[OP-835] Qt 5.1.0 - migrated GCS plugins

2013-09-15 23:37:20 +02:00

configrevowidget.h

[OP-835] Qt 5.1.0 - migrated GCS plugins

2013-09-15 23:37:20 +02:00

configstabilizationwidget.cpp

[OP-835] Qt 5.1.0 - migrated GCS plugins

2013-09-15 23:37:20 +02:00

configstabilizationwidget.h

[OP-835] Qt 5.1.0 - migrated GCS plugins

2013-09-15 23:37:20 +02:00

configtxpidwidget.cpp

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

configtxpidwidget.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

configvehicletypewidget.cpp

Remove some redundant "elevon" stuff for now. Will come back later when proper "elevon + rudder" artwork exists. Currently no different from vtail anyway...

2013-12-18 12:57:35 -05:00

configvehicletypewidget.h

[OP-835] Qt 5.1.0 - migrated GCS plugins

2013-09-15 23:37:20 +02:00

dblspindelegate.cpp

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

dblspindelegate.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

defaultattitude.ui

OP-935 Disables controls when no board is connected. Re-Factored the MixerCurve widget.

2013-05-04 00:13:15 +02:00

defaultattitudewidget.cpp

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

defaultattitudewidget.h

[OP-835] Qt 5.1.0 - migrated GCS plugins

2013-09-15 23:37:20 +02:00

defaulthwsettings.ui

OP-935 Adds checkbox for 'real time updates' to basic screen. Disables controls when no board is connected.

2013-05-01 12:59:07 +02:00

defaulthwsettingswidget.cpp

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

defaulthwsettingswidget.h

[OP-835] Qt 5.1.0 - migrated GCS plugins

2013-09-15 23:37:20 +02:00

fancytabwidget.cpp

[OP-835] Qt 5.1.0 - migrated GCS plugins

2013-09-15 23:37:20 +02:00

fancytabwidget.h

[OP-835] Qt 5.1.0 - migrated GCS plugins

2013-09-15 23:37:20 +02:00

gyro-calibration.cpp

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

input.ui

Reset executable bits from non-executable files (Windows legacy)

2013-04-24 01:18:46 +03:00

inputchannelform.cpp

OP-935 Adds Responsiveness sliders to basic stabilization screen.

2013-05-05 12:45:35 +02:00

inputchannelform.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

inputchannelform.ui

Reset executable bits from non-executable files (Windows legacy)

2013-04-24 01:18:46 +03:00

legacy-calibration.cpp

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

mixercurve.cpp

[OP-835] Qt 5.1.0 - migrated GCS plugins

2013-09-15 23:37:20 +02:00

mixercurve.h

[OP-835] Qt 5.1.0 - migrated GCS plugins

2013-09-15 23:37:20 +02:00

mixercurve.ui

almost done fixing any spacing isues, changed the font so its bigger, added some new stylesheet properties to linux and osx

2012-08-28 23:27:36 -07:00

output.ui

Reset executable bits from non-executable files (Windows legacy)

2013-04-24 01:18:46 +03:00

outputchannelform.cpp

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

outputchannelform.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

outputchannelform.ui

Reset executable bits from non-executable files (Windows legacy)

2013-04-24 01:18:46 +03:00

pipxtreme.ui

OP-932 Adds tooltips to the channel widgets.

2013-07-03 20:20:31 -07:00

revosensors.ui

OP-989 Changed layout for CC/CC3D Attitude configuration page. Renamed AccelTau to Accelerometer filtering. Updated tool tips for both CC/CC3D and Revolution pages.

2013-06-06 11:21:30 +02:00

stabilization.ui

Additional fixes as a result of review comments.

2013-10-18 23:18:35 +02:00

twostep.cpp

Uncrustification

2013-12-14 17:58:27 +01:00

txpid.ui

Reset executable bits from non-executable files (Windows legacy)

2013-04-24 01:18:46 +03:00

vernier.ui

OP-146 Stabilization config interface: this is a work in progress, and a pure mock-up of the UI, I would like feedback.

2011-02-22 22:03:32 +00:00