LibrePilot

libraries

Changed incorrect #if to #ifdef in pios_msheap.c

2015-09-13 12:39:03 +01:00

pios_adxl345.c

OP-1658 - Fixes to other (old and deprecated) sensors

2015-02-03 00:00:05 +01:00

pios_bma180.c

OP-1658 - Fixes to other (old and deprecated) sensors

2015-02-03 00:00:05 +01:00

pios_bmp085.c

OP-1658 - Fixes to other (old and deprecated) sensors

2015-02-03 00:00:05 +01:00

pios_board_info.c

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_board_io.c

Adds a port of the Tau Labs/dRonin FrSKY Sensor Hub module.

2017-05-17 19:45:40 -07:00

pios_board_sensors.c

LP-480 Move PIOS_COM_SetHalfDuplex() functionality to IOCTL. Remove RX/TX mode and change parameter order for PIOS_COM_ChangeConfig() and com driver set_config to match the databits/parity/stopbits scheme (like for example 8N1).

2017-04-24 13:04:23 +02:00

pios_callbackscheduler.c

Raise callbackscheduler stack size

2015-05-18 21:30:03 +02:00

pios_com_msg.c

OP-1275 - add ChangeBaud to PIOS_COM_MSG

2014-09-16 00:42:51 +02:00

pios_com.c

LP-480 Move PIOS_COM_SetHalfDuplex() functionality to IOCTL. Remove RX/TX mode and change parameter order for PIOS_COM_ChangeConfig() and com driver set_config to match the databits/parity/stopbits scheme (like for example 8N1).

2017-04-24 13:04:23 +02:00

pios_crc.c

OP-1122 OP-1158 added facility to update a CRC with uavobject data (flight side)

2014-01-12 15:12:41 +01:00

pios_debuglog.c

LP-381 - Adds circular buffer and run writes within a separate callback

2016-08-17 19:57:29 +02:00

pios_deltatime.c

OP-1211 removed unneeded define

2014-02-06 19:34:34 +01:00

pios_dosfs_logfs.c

Yaffs or dosfs now conditional linkage for simposix yaffs testing

2014-10-28 08:48:38 +11:00

pios_dsm.c

LP-480 DSM: do not fail to initialize driver for ports without bind capability.

2017-04-27 16:27:53 +02:00

pios_etasv3.c

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_exbus.c

LP-480 Move PIOS_COM_SetHalfDuplex() functionality to IOCTL. Remove RX/TX mode and change parameter order for PIOS_COM_ChangeConfig() and com driver set_config to match the databits/parity/stopbits scheme (like for example 8N1).

2017-04-24 13:04:23 +02:00

pios_flash_eeprom.c

REVONANO - emulate bigger sector size for erase operations

2015-05-18 21:30:02 +02:00

pios_flash_jedec.c

LP-83 fix two known bricking scenarios

2015-12-16 01:46:59 -05:00

pios_flashfs_logfs.c

LP-83 fix two known bricking scenarios

2015-12-16 01:46:59 -05:00

pios_flashfs_objlist.c

REVONANO - Fix erase settings

2015-05-18 21:30:02 +02:00

pios_gcsrcvr.c

OP-943 uses pios_mem API for heap allocation

2014-06-11 22:15:40 +02:00

pios_hcsr04.c

OP-943 uses pios_mem API for heap allocation

2014-06-11 22:15:40 +02:00

pios_hmc5x83.c

LP-423 - Modified IRQHandler

2016-09-30 23:24:09 +02:00

pios_hmc5843.c

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_hott.c

LP-480 Move PIOS_COM_SetHalfDuplex() functionality to IOCTL. Remove RX/TX mode and change parameter order for PIOS_COM_ChangeConfig() and com driver set_config to match the databits/parity/stopbits scheme (like for example 8N1).

2017-04-24 13:04:23 +02:00

pios_i2c_esc.c

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_iap.c

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_ibus.c

LP-480 Move PIOS_COM_SetHalfDuplex() functionality to IOCTL. Remove RX/TX mode and change parameter order for PIOS_COM_ChangeConfig() and com driver set_config to match the databits/parity/stopbits scheme (like for example 8N1).

2017-04-24 13:04:23 +02:00

pios_instrumentation.c

OP-1365 - adds quick and dirty decays to max and min values

2015-02-03 00:00:05 +01:00

pios_l3gd20.c

OP-1658 - Fixes to other (old and deprecated) sensors

2015-02-03 00:00:05 +01:00

pios_led.c

Moves pios_led functionality to pios_gpio and makes pios_led a thin layer over pios_gpio. Supports configuring multiple sets of GPIOs.

2013-07-28 07:01:08 -07:00

pios_logfs.c

uncrustification!

2014-11-08 12:59:16 +01:00

pios_mem.c

OP-1804: Add realloc.

2015-04-16 22:52:09 -07:00

pios_mpu6000.c

LP-340 uncrustify

2016-07-12 14:48:11 -04:00

pios_mpu9250.c

LP-475 Use signed int for sensor data to avoid data overflow corruption when applying adjustment factor.

2017-01-19 17:07:15 +01:00

pios_mpxv.c

OP-1869 "scale" lower case

2015-05-13 21:55:18 +02:00

pios_ms4525do.c

OP-1273 OP-1282 OP-1283 uncrustify

2014-03-31 22:17:58 +02:00

pios_ms5611.c

LP-72 Fix MS5611 driver to allow booting with unpowered i2c devices hanging the bus

2016-05-25 13:51:41 +02:00

pios_notify.c

LP-361 - Don't lose notifications when more than an alarm is active

2016-07-17 17:13:09 +02:00

pios_openlrs_rcvr.c

LP-484 This change removes custom PIOS_OpenLRS_Rcvr_UpdateChannels() api in favor of PIOS_OpenLRS_RegisterPPMCallback() to be in line with other receiver modules. Furthermore, this commit moves the openlrs/oplink ppm callback from pios_board.c into *rcvr* module itself.

2017-02-21 16:44:20 +01:00

pios_openlrs.c

LP-484 Addressed PR review issues.

2017-02-21 19:54:18 +01:00

pios_oplinkrcvr.c

LP-484 This change removes custom PIOS_OpenLRS_Rcvr_UpdateChannels() api in favor of PIOS_OpenLRS_RegisterPPMCallback() to be in line with other receiver modules. Furthermore, this commit moves the openlrs/oplink ppm callback from pios_board.c into *rcvr* module itself.

2017-02-21 16:44:20 +01:00

pios_rcvr.c

OP-1803 Return link quality of zero rather than throw an exception if no receiver if the receiver port is undefined

2015-04-20 21:40:42 +01:00

pios_rfm22b_com.c

LP-437 - Add support for a secondary radio stream and associated AuxCom driver

2017-01-06 16:02:28 +01:00

pios_rfm22b.c

LP-480 Removed RadioAuxStream function from PIOS_BOARD_IO_Configure_RFM22B(), added another function to configure radioaux from hwsettings (revo & sparky2 only).

2017-04-24 16:10:18 +02:00

pios_sbus.c

LP-480 RevoNano USART2 sbus baud rate workaround

2017-04-24 13:04:23 +02:00

pios_sdcard.c

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_semaphore.c

LP-190: Initial checkin that adds OpenLRS receiver support to Revolution and OPLinkMini.

2016-07-12 17:45:33 -07:00

pios_sensors.c

LP-281 use correct operator

2016-04-07 01:00:42 +02:00

pios_servo.c

LP-519 F1: Manage GPIO_Mode from pios_servo.c to allow universal timer pin configuration with TIM_SERVO_CHANNEL_CONFIG() macro.

2017-05-18 12:42:33 +02:00

pios_srxl.c

LP-480 Move PIOS_COM_SetHalfDuplex() functionality to IOCTL. Remove RX/TX mode and change parameter order for PIOS_COM_ChangeConfig() and com driver set_config to match the databits/parity/stopbits scheme (like for example 8N1).

2017-04-24 13:04:23 +02:00

pios_task_monitor.c

LP-96 - Implement CPU idle counters and calibration functions

2015-09-03 20:05:25 +02:00

pios_thread.c

LP-190: Initial checkin that adds OpenLRS receiver support to Revolution and OPLinkMini.

2016-07-12 17:45:33 -07:00

pios_trace.c

uncrustification!

2014-11-08 12:59:16 +01:00

pios_ubx_dcc.c

OP-1477 - Add pios_ubx_ddc driver to handle i2c comms with UBlox GPS

2014-09-16 22:40:52 +02:00

pios_usb_desc_hid_cdc.c

LP-480 Moved sensors initialization to pios_board_sensors.c

2017-04-24 13:03:07 +02:00

pios_usb_desc_hid_only.c

LP-480 work in progress: revo, nano & sparky2 targets ok.

2017-04-24 12:55:06 +02:00

pios_usb_util.c

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_video.c

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_wavplay.c

LP-72 Various typo fixes - Set PPM input as default

2016-05-25 13:51:41 +02:00