Brian Webb fdf853a2fe Cleaned up the PipXtreme makefile.

2012-03-18 19:26:18 -07:00

..

inc

Moved unused crc.c/h back to PipXtreme directory.

2012-03-18 10:26:47 -07:00

reserved

pipx: COM device ids are now 32bit not 8bit

2011-02-13 15:54:26 +00:00

System

Moved RFM22B code from PipXtreme to pios_rfm22b.c driver. The radio is now passing data.

2012-03-18 10:22:05 -07:00

api_config.c

com: remove all references to PIOS_COM_ReceiveBufferUsed()

2012-01-02 14:27:06 -05:00

crc.c

Moved unused crc.c/h back to PipXtreme directory.

2012-03-18 10:26:47 -07:00

gpio_in.c

Added some files to the PipXtreme folder.

2010-10-13 07:49:05 +00:00

main.c

Update to use the delay API to get entropy rather than reading the timer directly.

2011-07-23 13:53:42 -07:00

Makefile

Cleaned up the PipXtreme makefile.

2012-03-18 19:26:18 -07:00

packet_handler.c

Moved RFM22B code from PipXtreme to pios_rfm22b.c driver. The radio is now passing data.

2012-03-18 10:22:05 -07:00

pios_board.c

board_hw_defs: factor out board-specific hw config definitions

2012-01-22 19:41:41 -05:00

pios_usb_board_data.c

usb: allow runtime selection of USB descriptors via hwsettings

2012-01-14 14:28:15 -05:00

ppm.c

Rewrote PipX's PPM input decoder to do away with supervisor timer/monitor.

2011-03-09 17:36:11 +00:00

rfm22b.c

Various minor changes to do with switch modem mode on the fly but mainly PPM Input decoder (with error/noise detection) is now working

2011-03-06 18:52:18 +00:00

saved_settings.c

Added "Ready-To-Send-Time" parameter adjustment

2011-02-15 12:57:46 +00:00

stopwatch.c

Added some files to the PipXtreme folder.

2010-10-13 07:49:05 +00:00

stream.c

Various minor changes to do with switch modem mode on the fly but mainly PPM Input decoder (with error/noise detection) is now working

2011-03-06 18:52:18 +00:00

transparent_comms.c

com: remove all references to PIOS_COM_ReceiveBufferUsed()

2012-01-02 14:27:06 -05:00

watchdog.c

removed pios_board.h

2011-01-13 19:22:54 +00:00