Cristian Maglie
bc6836f266
Added Esplora precompiled firmware
2012-12-07 21:24:24 +01:00
Cristian Maglie
948a5c89e4
Added support for Arduino Esplora
2012-12-07 18:11:07 +01:00
Cristian Maglie
1ca95a7bda
Updated firmware for atmega8 for new avr-gcc versions.
...
fixes #153
fixes #1122
2012-11-30 23:15:30 +01:00
Cristian Maglie
ad93a18b85
Saved old Leonardo and Micro production firmware.
...
Rebuilt firmware for Micro.
Added pre-loaded Blink to new firmwares.
2012-11-30 16:34:04 +01:00
Kristian Lauszus
ef6f1eb11d
Improved Leonardo bootloader
...
The power-on reset detection didn't work properly, but has now been
fixed
2012-11-30 15:32:11 +01:00
Zachary Eveland
d92a86f7b7
Caterina changes to support Micro. includes newly rebuilt version of the bootloader merged with Blink produced using 1.0.2
2012-11-23 16:09:32 -05:00
David A. Mellis
839b58c1ae
Updating Micro bootloader firmware.
2012-11-02 17:45:57 -04:00
David A. Mellis
f689991a59
Adding LilyPad Arduino USB.
2012-11-01 10:45:50 -04:00
David A. Mellis
ac1c8f921b
Adding Micro.
2012-10-27 14:12:26 -04:00
Zach Eveland
2e575db249
changed PID values for Leonardo bootloader and sketch
...
done to avoid driver problems for users who installed the pre-release bootloader and driver
2012-04-25 15:56:18 -04:00
Zach Eveland
bb9a4f89cc
merged Caterina with Blink
2012-04-11 23:24:04 -04:00
Zach Eveland
7e235dbff8
fixed logic bug in Caterina that could stop the bootloader from entering self-programming mode
2012-04-11 23:19:05 -04:00
Zach Eveland
d3a8e450ee
Micro I hardly knew ye
2012-04-09 10:12:14 -04:00
Zach Eveland
3f6342e9bb
Micro and Leonardo bootloaders for distribution are now merged with Blink sketch
2012-04-09 08:08:34 -04:00
Zach Eveland
d02e4481d3
PID and VID are no longer hard-coded in bootloader. instead they are passed in at compile-time from makefile. also added and renamed built bootloader images for Micro and Leonardo
2012-04-09 08:03:56 -04:00
Zach Eveland
a05a0d531b
bugfix for Caterina not starting sketch if "verify upload" turned off in IDE.
...
Previously, if avrdude skipped the upload step the read while write memory might never be reenabled. This would prevent the bootloader from ending and the sketch from starting - the bootloader just continued to run even after a successful upload. Now enable RWW when we receive the AVR109 "Exit bootloader" 'E' command. Had to disable lock bit changing support in the bootloader to free up flash for the change - will anyone miss it?
2012-03-14 17:48:11 -04:00
Zach Eveland
2a19c327bb
changed Caterina timeout after self-programming to 500 ms (from 250 ms)
...
attempt to fix bug reported by Dave Mellis:
"avrdude: ser_close(): can’t reset attributes for device: Invalid argument"
is thrown after attempting an upload in the IDE (though the upload seems to be successful)
2012-03-14 17:07:14 -04:00
Zach Eveland
30421143f9
give Leonardo bootloader 250 ms to finish housekeeping before leaving self-programming mode
...
Earlier approach had bootloader end as soon as it was told to. On Linux this caused problems with avrdude because the microcontroller never had a chance to send an acknowledgement.
2012-03-08 14:20:12 -05:00
Zach Eveland
33116711b0
removed old version of Leonardo's caterina bootloader, replaced with LUFA-based caterina
2012-03-08 13:47:42 -05:00
Zach Eveland
09aa8bd678
reduced Caterina timeout to 8 seconds from 16
2012-03-01 08:51:47 -05:00
Zach Eveland
4c3aa52258
Leonardo now checks whether bootloader should be run after a WDT event.
...
Before the sketch initiates an auto-reset for upload it pokes a magic word into a specific RAM address. On starting the bootloader checks this address. If it finds the magic word it knows the bootloader code should run. If not it jumps straight back to sketch.
Test in a sketch by adding to setup():
wdt_enable(WDTO_2S);
Sketch should upload, start, run for two seconds, WDT, and sketch should restart (not bootloader).
Had to cut out unused descriptor code to make the bootloader still fit in 4k.
2012-02-14 12:17:30 -05:00
Zach Eveland
52b0c7214b
Leonardo bootloader jumps straight to sketch for a power-on reset.
...
Disconnect programmer after burning bootloader to get the full effect. ICSP and JTAG programmers do a hardware reset after any reset condition, confusing the firmware a little.
2012-02-14 09:59:48 -05:00
Zach Eveland
25a4fe8607
changed Leonardo bootloader and sketch PID values again (now 0x0701 for bootloader, 0x0801 for sketch)
2012-02-13 00:10:16 -05:00
Zach Eveland
c39793001c
adjusting descriptors - trying to prevent sketch and bootloader from grabbing different COM numbers on Windows
2012-02-08 01:16:56 -05:00
Zach Eveland
4ee57f12e9
changed Caterina descriptors - Arduino LLC VID, new PID, manufacturer string, and serial number
2012-02-07 23:52:55 -05:00
Zach Eveland
5d53eed01a
fixed bug in Caterina which caused some programming instructions to fail
...
Timer 1 interrupts were trashing self-programming timing. Now disable Timer 1 compare match before doing Flash tasks and reenable afterward.
2012-02-07 23:46:31 -05:00
Zach Eveland
f2d5ea87ad
increased Leonardo bootloader timeout to 16 seconds
2012-02-06 15:23:41 -05:00
Zach Eveland
5483adf8fe
proper bootloader timeout and LED control in Leonardo bootloader
2012-02-03 23:15:04 -05:00
Zach Eveland
1303b6fbba
Caterina now cleanly hands off operation to the sketch
...
had to remove TIMER1 operation from bootloader - was interfering with normal sketch operation
2012-01-24 18:04:10 -05:00
Zach Eveland
6498b66059
move interrupt vector table to application section before jumping to it after upload finished.
2012-01-21 16:51:55 -05:00
Zach Eveland
73f6f2edd5
Leonardo bootloader checks reason for reset and jumps immediately to sketch if reset was caused by WDT
2012-01-21 16:39:06 -05:00
Zach Eveland
371b72c681
stripped all LUFA LED control. from LUFA-based Caterina
2012-01-19 21:31:51 -05:00
Zach Eveland
83c9f21667
changed fuses to select 4k bootloader for LUFA-based Caterina
2012-01-19 21:18:07 -05:00
Zach Eveland
db397d5b35
added Board/LEDs.h to LUFA-based Caterina
2012-01-19 21:17:12 -05:00
Zach Eveland
98b0491fbd
superficial changes to stock LUFA CDC bootloader - renamed project, removed unnecessary files
2012-01-19 20:31:35 -05:00
Zach Eveland
9c0352b22a
initial checkin of LUFA 111009 CDC bootloader
2012-01-19 20:04:55 -05:00
Zach Eveland
0fc76a6b87
made Leonardo and Micro bootloader PIDs same as sketch PIDs
2012-01-10 21:23:01 -05:00
Zach Eveland
2dfb0dce2c
restored composite and non-composite device descriptors (removed in 4b05c3fc75)
...
Windows wants to see both types of device descriptors.
2012-01-10 20:52:57 -05:00
Zach Eveland
77b40e6bba
reenabled HID to force Leonardo bootloader to enumerate as a composite device
2012-01-10 17:04:32 -05:00
Zach Eveland
932afb8428
renamed DiskLoader to Caterina (after Leonardo's mom)
2012-01-10 16:29:47 -05:00
Zach Eveland
99fea13f84
changed USB PID for Leonardo and Micro bootloaders
...
sketch and bootloader will use different PIDs to distinguish one from the other.
2012-01-10 16:09:56 -05:00
Zach Eveland
48ed974834
fixed warning when comparing pgm_read_word(0) to -1 (thanks, Limor Fried and Phillip Torrone)
2012-01-10 16:00:46 -05:00
Zach Eveland
e3b89d178d
got rid of u8, u16, u32 typedefs in Diskloader
...
done to bring types in line with others in Arduino core
2012-01-10 15:51:44 -05:00
Zach Eveland
f403b001a2
made the bootloader's LED control macro names less offensive
...
TX_LED_OFF() instead of TXLED0, etc.
2012-01-10 15:38:26 -05:00
Zach Eveland
4b05c3fc75
added conditional compilation for HID, removed conditional compilation for CDC (is always used). disabled HID by default. also always enumerates as composite now.
...
the bootloader must always have a CDC interface. HID is optional and not even complete to reduce size.
2012-01-10 15:31:56 -05:00
Zach Eveland
015044add5
fix bug in handling of long descriptors for bootloader USB (thank you, Todd Krein, Limor Fried, and Phillip Torrone)
...
descriptors longer than 255 bytes were being shortened, causing problems with enumeration under Windows
2012-01-10 14:25:40 -05:00
Zach Eveland
f39ec37722
reset the Leonardo board when leaving the bootloader, before starting the sketch
...
Done so all IO and other registers are properly reinitialized when a new sketch is uploaded or when an existing sketch is started. Uses a watchdog timeout with a 15 ms period to accomplish the reset. Bootloader checks the reason for reset and only enumerates as bootloader and enters the programming loop if reset was NOT caused by WDT.
2011-12-31 12:19:08 -05:00
Zach Eveland
bdf7107507
bootloader merged with blink sketch
...
full set of descriptors in sketch fixes driver installation issue on Win7.
2011-12-26 17:19:48 -05:00
David A. Mellis
3df132aea9
Correcting Arduino Mini w/ ATmega328 bootloader file and fuses (untested).
2011-11-25 19:26:01 -06:00
Zach Eveland
75eb722759
Leonardo bootloader now sends iSerial string during enumeration. Seems to satisfy Windows' composite device requirements.
2011-11-16 16:38:22 -05:00
