rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2025-02-20 10:54:14 +01:00
Code Issues Releases Activity
5,764 Commits 5 Branches 8 Tags
Commit Graph

300 Commits

Author SHA1 Message Date
James Cotton
04e784edc7 Make pathdesired update on change with throttling to avoid slamming telemetry 
in position hold mode.
 2012-06-26 11:57:11 +03:00
James Cotton
f8d196ffe8 Added support for board voltage monitor to battery module. 
The module can be configured to enable what's needed from board voltage, battery voltage and battery current measurement.
In GCS the POWER box in system healt will show alarm related to the supply voltage to the board.
If a power warning/critical alarm is raised, the warning condition is left even if the board voltage return to an acceptable value.

Conflicts:

	ground/openpilotgcs/share/openpilotgcs/diagrams/default/system-health.svg
	shared/uavobjectdefinition/systemalarms.xml
 2012-06-15 19:43:34 -05:00
James Cotton
9218145aa9 Merge remote-tracking branch 'origin/Brian-PipXtreme-V2' into revo 2012-06-12 22:53:30 -05:00
Brian Webb
2088753ee5 Changed the flight side access of GCSReceiver to readwrite to support sending GCSReceiver object in response to PPM packets on the PipX. 2012-06-09 10:54:07 -07:00
James Cotton
9e5b1658b1 Remove AHRSComms from SystemAlarms 2012-06-09 12:14:11 -05:00
James Cotton
463ad550e2 A few comments in my code and some simplication to the fixedwingfollower to get 
it compiling against my path planner.
 2012-06-08 10:46:40 -05:00
James Cotton
4c3ca17e34 Backport the fixed wing path follower 2012-06-08 10:46:39 -05:00
James Cotton
574ab3fcaa Make the VtolPathFollower an optional module 
Note that RTH mode right now checks that throttle control is enabled, but this
should only occur if the system is a VTOL.
 2012-06-08 10:46:38 -05:00
James Cotton
f5b2575c88 Merge branch 'next' into revo 
Conflicts:
	flight/PiOS/Boards/STM32F4xx_Revolution.h
	flight/Revolution/System/inc/pios_config.h
	package/Makefile
 2012-06-07 12:45:06 -05:00
James Cotton
7b8110a457 Merge branch 'MikeL' into next 2012-06-07 11:31:41 -05:00
James Cotton
c689bcfb80 Merge remote-tracking branch 'origin/Brian-PipXtreme-V2' into revo 2012-06-07 09:49:18 -05:00
James Cotton
5e01617cbd Merge branch 'next' into MikeL 
Conflicts:
	ground/openpilotgcs/src/plugins/config/airframe.ui
	ground/openpilotgcs/src/plugins/config/configoutputwidget.cpp
	ground/openpilotgcs/src/plugins/config/configoutputwidget.h
	ground/openpilotgcs/src/plugins/config/configvehicletypewidget.cpp
	ground/openpilotgcs/src/plugins/config/configvehicletypewidget.h
 2012-06-06 11:58:06 -05:00
Brian Webb
4e68f6543e Added tracking of dropped packets to PipX and turned off visible text on signal strength meters. 2012-06-04 21:18:13 -07:00
Mike LaBranche
0ba8345c51 Merge branch 'next' into MikeL 
Conflicts:
	flight/Bootloaders/Revolution/inc/pios_config.h
	flight/Modules/OveroSync/inc/overosync.h
	flight/Modules/Sensors/inc/sensors.h
	flight/PiOS/Boards/STM32F4xx_Revolution.h
	flight/PiOS/STM32F4xx/pios_iap.c
	flight/Revolution/System/inc/pios_config.h
	ground/openpilotgcs/src/plugins/config/config.pro
	ground/openpilotgcs/src/plugins/config/configccattitudewidget.cpp
	ground/openpilotgcs/src/plugins/config/configvehicletypewidget.cpp
 2012-06-04 16:59:31 -07:00
Mike LaBranche
bf591ebe45 Merge branch 'next' into MikeL 
Conflicts:
	flight/Bootloaders/Revolution/inc/pios_config.h
	flight/Modules/OveroSync/inc/overosync.h
	flight/Modules/Sensors/inc/sensors.h
	flight/PiOS/Boards/STM32F4xx_Revolution.h
	flight/PiOS/STM32F4xx/pios_iap.c
	flight/Revolution/System/inc/pios_config.h
	ground/openpilotgcs/src/plugins/config/config.pro
	ground/openpilotgcs/src/plugins/config/configccattitudewidget.cpp
	ground/openpilotgcs/src/plugins/config/configvehicletypewidget.cpp
 2012-06-04 15:38:57 -07:00
James Cotton
0b828fbdd0 Merge branch 'next' into revo 
Conflicts:
	Makefile
 2012-06-04 14:12:19 -05:00
James Cotton
ff0a3a156e Merge remote-tracking branch 'origin/os/AeroSimRC' into next 2012-06-04 12:25:59 -05:00
James Cotton
ed2fb5cb09 Merge branch 'next' into revo 2012-06-04 12:23:58 -05:00
James Cotton
bda3f301cb Rename VBar mode to VirtualBar 2012-06-04 12:22:39 -05:00
James Cotton
4c562b88d1 Make the amount to suppress the gyros adjustable instead of binary 2012-06-04 12:22:39 -05:00
James Cotton
59972d5570 Limit the number of degrees the vbar can deflect. This is good for fast flips 
etc.
 2012-06-04 12:22:39 -05:00
James Cotton
6719ee8639 Add piro compensation option to the vbar mode 2012-06-04 12:22:39 -05:00
James Cotton
3283b99d4e For hardcode flipping allow full stick to completely override the gyro 
feedback.
 2012-06-04 12:22:39 -05:00
James Cotton
df82cb6ada Change the units to something more reasonable 2012-06-04 12:22:39 -05:00
James Cotton
fe978504bc Add friendly settings for the vbar mode including the VbarTau which acts like 
the time constant.
 2012-06-04 12:22:39 -05:00
James Cotton
1b55df733d Create virtual flybar setting for stabilization modes 2012-06-04 12:22:38 -05:00
James Cotton
daaa661080 Turned "Battery" into an optional module. It otherwise prevents flying if no voltage sensor is installed. 
Conflicts:

	shared/uavobjectdefinition/hwsettings.xml
 2012-06-04 10:50:45 -05:00
James Cotton
10aa31a57f When ManualControlSettings.FailsafeBehavior is set to RTH and no valid input is 
detected and the aircraft is armed enter RTH mode.
 2012-06-04 09:48:05 -05:00
James Cotton
21eb48c58c Add a RTH flight mode and remove it from the waypoint actions as that is 
redundant with flying to (0,0,0)
 2012-06-03 22:14:11 -05:00
James Cotton
71e14a691e Merge branch 'next' into revo 2012-06-03 19:00:51 -05:00
James Cotton
484057e9ae Revert "Change waypoints to update on change" 
This reverts commit 2e5c34b8efce01810f2da26c1b7b54a70e90daad.
 2012-06-02 18:40:54 -05:00
James Cotton
3ac14fccb7 Change waypoints to update on change 2012-06-02 18:40:54 -05:00
James Cotton
4ad23864c8 Treat the waypoint action as something to do once you hit that location. (e.g. 
PathToNext) and add a Stop value to indicate not to advance to the next
waypoint.  This is essentially a perament loiter to the pathfollower (I think)
but it's really just to have the ability to "delete" waypoints.
 2012-06-02 18:40:53 -05:00
James Cotton
25f85ee4fe Add an error flag to ObjectPersistence and when saving a setting make it verify 
that the data reads successfully.
 2012-06-02 10:23:27 -05:00
James Cotton
1934752d50 Merge branch 'revo-next' into revo 2012-05-28 15:23:14 -05:00
Oleg Semyonov
5739dfbfc8 Merge remote-tracking branch 'origin/next' into os/aerosimrc 
Conflicts:
	shared/uavobjectdefinition/gcsreceiver.xml
 2012-05-28 21:46:43 +03:00
James Cotton
4360d8adfd Merge branch 'next' into revo-next 2012-05-28 11:25:40 -05:00
James Cotton
8a6073fbaf Merge remote-tracking branch 'revo/revo-next' into testing 
Conflicts:
	Makefile
	flight/PiOS.osx/osx/Libraries/FreeRTOS/Source/portable/GCC/Posix/port.c
	flight/PiOS.osx/osx/Libraries/FreeRTOS/Source/task.c
	flight/PiOS.posix/posix/Libraries/FreeRTOS/Source/portable/GCC/Posix/port_posix.c
	flight/PiOS.posix/posix/Libraries/FreeRTOS/Source/tasks.c
	flight/Revolution/Makefile
	ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
	ground/openpilotgcs/src/plugins/uploader/devicewidget.cpp
	shared/uavobjectdefinition/taskinfo.xml
 2012-05-28 09:13:26 -05:00
Corvus Corax
90e4047e2c bugfix to etasv3 - made uavobject def compatible with new update modes 2012-05-28 13:09:38 +02:00
Corvus Corax
978ab5b96c Merge remote branch 'origin/stac/etasv3' into revo-next 2012-05-28 12:56:27 +02:00
Oleg Semyonov
f95d29a3b8 TxPID: add GyroTau to the list of parameters (OP-637) 2012-05-28 12:48:55 +03:00
Mike LaBranche
7fb96f1acd Bugfixes in configwidgets; 
Refactor mixer type and vector set/get, named vector elements;
 2012-05-24 09:38:34 -07:00
Brian Webb
6cb13aa2ba Fixed failed merge with next. 2012-05-20 18:36:08 -07:00
Brian Webb
2f1a9e3e7d Added PPM input to the PipXtreme. Also added configurable GCSReceiver timeout. 2012-05-20 18:30:37 -07:00
Stacey Sheldon
ba8d60301c usb: remove run-time selectable device descriptors 
BL images now always use hid-only.

FW images can use hid-only or hid+vcp but this is selected
ONLY at compile time based on whether PIOS_INCLUDE_USB_CDC
is defined.

CC uses HID+VCP by default now.
 2012-05-19 16:06:48 -04:00
Stacey Sheldon
48cb20dc81 hid+vcp: change default USB descriptor to HID+VCP 
Now that we have a USB descriptor for HID+VCP that works
on Ubuntu 11.10, MacOS 10.7.3, Win7-SP1-32bit,
WinXP-SP3-32bit, Win7-SP1-64bit.

VCP is known to not work on WinXP without service pack 3.
 2012-05-19 16:06:30 -04:00
Brian Webb
6a7179120d Fixed setting of PipX description, and changed gcs receiver object to be update on change on flight side so that it works on the PipX. 2012-05-19 09:25:11 -07:00
Brian Webb
93ec7c11a6 Fixed race condition on getting packets. 2012-05-15 19:38:14 -07:00
Mike LaBranche
ed54716436 add gui config data bit storage to fixedwing,multirotor,ground vehicles 2012-05-14 10:05:40 -07:00
Brian Webb
ec67742ff6 Added configuration of COM ports on PipX. 2012-05-12 13:16:36 -07:00