Alessio Morale
109c21a8ab
REVONANO - Workaround for the SBUS issue (use oversample 8 instead of 16 to reduce the bitrate error)
2015-05-18 21:30:04 +02:00
Alessio Morale
0d714fb861
REVONANO - Change Power Regulatro Scale mode to Scale1.
...
Looks like stm32f4xx_Clock_Configuration_V1.1.0 seems like doesn't play well with 411. Reg Scale mode was wrong
2015-05-18 21:30:03 +02:00
Alessio Morale
2497b3d605
REVONANO - some cleanup
2015-05-18 21:30:02 +02:00
Alessio Morale
1d7c1b2fc9
REVONANO - Change target to 411, fix ram and flash extents, raise clock to 96MHz (cannot do 100 because of USB) , cleanup spl
2015-05-18 21:29:57 +02:00
Alessio Morale
d2dae79c82
REVONANO - update SPL to 1.4.0 that adds support for f411
2015-05-18 21:29:55 +02:00
Alessio Morale
632a14023c
REVONANO - exclude ccram stuffs
2015-05-18 18:55:26 +02:00
Alessio Morale
5c13551a1a
REVONANO - Add support for eeprom and objlist fs
2015-05-18 18:55:25 +02:00
Alessio Morale
805750050c
REVONANO - Support distinct remaps for SDA and SCL
2015-05-18 18:54:52 +02:00
Alessio Morale
690e04f4f0
REVONANO - Initial board support
2015-05-18 18:52:09 +02:00
Alessio Morale
6d6be75605
REVONANO - Update SPL to 1.3.0
2015-05-18 18:48:18 +02:00
Alessio Morale
b59408863a
REVONANO - Allows per board linker scripts
2015-05-18 18:48:17 +02:00
Steve Evans
6e6b8c8bad
Merge branch 'steve/OP-1803_s.bus_dropped_frames' into steve/OP-1849_flexio_com_bridge
2015-05-08 07:43:16 +01:00
Steve Evans
023f157ba8
OP-1803 Disable untested DSM link quality code
2015-05-08 07:42:32 +01:00
Steve Evans
e89356deb2
OP-1849 Invert DTR and initialise
2015-04-26 14:18:40 +01:00
Steve Evans
7445add280
OP-1849 Hooks all in place for CDC line state changes to drive port GPIO for DTR
2015-04-26 03:05:47 +01:00
Steve Evans
7f93340f7f
OP-1849 Initial commit
2015-04-24 22:46:07 +01:00
Steve Evans
79339d677f
Merge branch 'steve/OP-1803_s.bus_dropped_frames' into steve/OP-1849_update_minimosd_via_usb
2015-04-21 07:44:50 +01:00
Steve Evans
b87a1c1fa6
OP-1803 Enable DSM link quality so testers have something to work with
2015-04-19 18:41:04 +01:00
Alessio Morale
3a772e1828
OP-1828 - Add support for optional analog inputs
...
Optional analog inputs are not initialized at ADC module startup.
Calling PIOS_ADC_PinSetup(uint32_t pin) setups them as analog input at a later stage.
2015-04-09 00:25:53 +02:00
abeck70
b61a76eeae
Merge branch 'next' into abeck/OP-1721
2015-02-19 12:19:28 +11:00
abeck70
53482be09c
OP-1721 C++ and ARM tools
...
Enable revo C++ support:
1. Set USE_CXX to enable compliation and linkage of C++ source code
2. Disables rtti and exceptions
3. operator new and delete call pios malloc/free
4. Static constructor invocation supported
5. Additional methods, compile options, and need to have main as a cpp to solve various link issues when using static constructors but to avoid adding unnecessary libs.
6. Upgrade arm tools
2015-02-13 12:56:04 +11:00
Alessio Morale
f3fe45750d
OP-1683 - Remove dead code
2015-02-11 22:33:58 +01:00
Alessio Morale
46521f1c2d
Merge remote-tracking branch 'origin/amorale/OP-1683_syncupdate_oneshot' into next
2015-02-08 17:59:59 +01:00
Alessio Morale
86a1ca2bcf
OP-1683 - Pulse length must be zeroed at each cycle
2015-02-02 19:58:04 +01:00
Alessio Morale
752f3447d2
OP-1683 - Implement an update skip strategy in single pulse mode when pulse period is higher than the update cycle
2015-02-02 02:58:22 +01:00
Alessio Morale
a5f601593d
OP-1683 - Put again in place safe limits on pulse width
2015-01-31 15:04:02 +01:00
Alessio Morale
86571a804d
OP-1683 - Switch to the same schema used by cleanflight.
...
Running in repetitive mode, clearing CCRx after manually triggering update event.
2015-01-30 21:22:14 +01:00
Alessio Morale
632051c0ac
OP-1683 - Increase resolution for OneShot125 running timer at 8MHz, setup automatically rates for OneShot
2015-01-30 21:22:00 +01:00
Alessio Morale
7955f63c98
OP-1683 - Clenaup, trigger update in setfailsafe, Fix standard pwm operation
2015-01-25 21:25:14 +01:00
Alessio Morale
2a10d9d481
OP-1683 - fixes to PIOS_Servo, added code to prevent overflows
2015-01-24 13:35:41 +01:00
Laurent Lalanne
5d4b1df85c
OP-1652 Fix comment
2015-01-24 00:56:31 +01:00
Alessio Morale
1f95332ff4
OP-1683 - Implement servo synchronous update mode for F4
2015-01-23 23:50:51 +01:00
Fredrik Arvidsson
c8c3a46735
Uncrustify
2015-01-09 21:49:03 +01:00
Mathieu Rondonneau
acc124cacb
OP-1625: DSM: more robust detection of resolution
...
This allows switching back and forth between 10 and 11 bit
code which prevents getting locked up in one or the other.
It also avoids a situation that can cause an infinite
recursion.
This changeset is cherry-picked from TauLabs (b7eaf87502085666d9738ae16c66170f187f3981).
Thanks to Taulabs for improving OpenPilot's DSM autodetect feature.
2014-12-30 21:29:06 -08:00
Mathieu Rondonneau
6844f8351d
run uncrustify.
2014-12-04 20:17:29 -08:00
Mathieu Rondonneau
4b00f6039d
OP-1626: Allow binding to happen within satellite binding window.
...
- This is working for satellite 22ms (genuines and clones).
- This change only affect revo.
2014-11-29 19:59:18 -08:00
Alessio Morale
99d73426b8
Uncrustify
2014-11-27 12:05:59 +01:00
Fredrik Larsson
cd94410468
DSM Protocol removed flight firmware
2014-11-22 08:32:00 +11:00
Mathieu Rondonneau
b0cc9ce021
OP-1625: DSM2/DSMX autodetection of channel resolution.
2014-11-20 19:58:34 -08:00
Stefan Karlsson
3285519380
OP-1536 Send only the available bytes, not the entire buffer, to the USB CDC RX callback function
2014-10-10 23:51:04 +02:00
Alessio Morale
e553014596
Merge branch 'amorale/OP-1476_1477_1275_GPSV9_pios_firmware_bootloader' into next
2014-10-03 00:37:55 +02:00
Alessio Morale
9e0596c2c5
Merge remote-tracking branch 'origin/amorale/OP-1379_ext_led_notification_module_new' into next
...
Conflicts:
Makefile
flight/targets/boards/discoveryf4bare/firmware/Makefile
flight/targets/boards/revolution/firmware/Makefile
2014-09-29 21:26:31 +02:00
Alessio Morale
7e789ccc69
OP-1379 - Clear output pin at the end of dma cycle
2014-09-25 00:59:39 +02:00
Alessio Morale
cd7c76aa13
OP-1275 move implementation specific enums out of common pios_i2c_priv.h
2014-09-16 00:42:50 +02:00
Alessio Morale
233dec6d8d
OP-1379 - Various fixes and additions
...
- Support blocks of led for notification (that is a certain number of leds between a min and a max index);
- Fix an issue with bogus colours on fast updates at LED N°0.
- Add NOTIFY_SEQUENCE_NULL to skip handling a specific alarm status;
- Adjust sequences and add Config and Receiver Alarms;
- fix issue with Alarm trigger/repetition;
- Enables Notify module only if a WS281x output is enabled.
- Add some documentation for sequence/alarm definitions (sequences.h)
- Make sequences more coherent. All GPS related info are now shown in green.
- Revert to original blinking rate for onboard led
- add Notify on DiscoveryF4Bare target
2014-09-06 12:11:53 +02:00
Stefan Karlsson
34983a2d28
OP-922 Fix typo in pios_tim.c
2014-08-16 16:58:15 +02:00
Alessio Morale
1067ea59d1
OP-1379 - Split pios_ws2811.h in config and public api header
2014-08-12 22:19:30 +02:00
Alessio Morale
1f74977472
OP-1379 add base types for colour, Initial ext rgb led api definition
2014-08-12 09:44:44 +02:00
Alessio Morale
03d03cfb06
OP-1395 add a vTaskDelay when waiting for dma transfer to complete when using FreeRTOS.
2014-07-08 02:54:17 +02:00
Alessio Morale
6226aec2a7
OP-943 uses pios_mem API for heap allocation
2014-06-11 22:15:40 +02:00
