Corvus Corax
e9d1a2af4b
OP-1309 get rid of this horrible bound() function code duplication throughout entire flight code and put it into libraries/math
2014-04-26 17:48:54 +02:00
Philippe Renon
3b7b06aad0
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into next
2014-04-09 09:11:54 +02:00
Philippe Renon
ef137a27b3
OP-1033 Added note where appropriate that changing USB buffer length will require changes to the USB buffer setup
2014-03-03 22:01:13 +01:00
Alessio Morale
2bcbf7dc86
OP-1026 remove legacy idle time calculation in OPLink code
2014-02-22 00:31:06 +01:00
Corvus Corax
49a1c4c28f
OP-942 refactored callback scheduler to fit into PiOS naming scheme
2014-02-02 22:08:16 +01:00
Corvus Corax
5b9a17f630
OP-942 moved DelayedCallbackScheduler into pios/common
2014-02-02 20:31:37 +01:00
Philippe Renon
772c395e67
OP-1122 OP-1145 fixed handling of ground messages done by OPLM
...
- OPLM used to receive and relay all messages
- OPLM will now reveice only specific messages and relay others as required (needs to be reviewed...)
- add RadioComBridgeStats uavobject to collect and report tx/rx statistics
- made error handling more robust
- added a few FIXMEs
2014-01-06 21:35:00 +01:00
Corvus Corax
be9faabe92
Merge branch 'next' into corvuscorax/onboardlogging
2013-11-26 00:34:01 +01:00
Alessio Morale
bacc4d3d79
Merge branch 'master' into next
...
Conflicts:
flight/targets/boards/oplinkmini/firmware/pios_board.c
ground/openpilotgcs/copydata.pro
2013-11-25 01:12:10 +01:00
Corvus Corax
d235a24e23
Merge branch 'next' into corvuscorax/onboardlogging
2013-11-19 18:49:58 +01:00
Corvus Corax
7a6c0b61e8
Merge branch 'next' into corvuscorax/callbackeventdispatcher2
2013-11-19 18:36:20 +01:00
Corvus Corax
9414f3513f
adapted telemetry stack sizes for flight firmware to include more space needed for logging feature
2013-11-17 22:39:39 +01:00
Brian Webb
2340f4f0d9
OP-1050: Moves LED configuration above settings erase in OPLink pios_board.c to prevent crashing when settings are erased.
2013-07-29 20:37:00 -07:00
Corvus Corax
9537cac701
Merge branch 'next' into corvuscorax/callbackeventdispatcher2
2013-07-28 17:10:20 +02:00
Brian Webb
e246ecf536
Moves pios_led functionality to pios_gpio and makes pios_led a thin layer over pios_gpio. Supports configuring multiple sets of GPIOs.
2013-07-28 07:01:08 -07:00
Alessio Morale
11bc7804d0
Merge branch 'amorale/OP-994_adc_cleanup' into next
2013-07-16 12:23:25 +00:00
Brian Webb
0d02df4d02
Uncrustified OPLink code.
2013-07-05 18:49:26 -07:00
Brian Webb
6dbecca7a5
OP-932 Fixes erasing settings on OPLink and blocks OPLinkSettings objects from being transmitted over the radio.
2013-07-05 18:25:52 -07:00
Brian Webb
d0d8a0aadd
OP-932 Adds PWM outputs to OPLinkMini. Both gpio pins on the main and/or flexi port can be configured to output PWM for a total of up to 4 PWM outputs.
2013-07-03 18:58:34 -07:00
Alessio Morale
89cb294218
OP-994 Move pios_architecture,h include in pios,h
...
+review OPReview-506
2013-07-02 19:26:39 +02:00
Brian Webb
491e5fe685
Adds a failsafe on PPM output on OPLink that kicks in when the link goes down. Also updates all air datarate settings and adds new 64 and 100 kbps modes.
2013-06-29 15:00:38 -07:00
Corvus Corax
b19a74613a
uncrustification
2013-06-28 19:20:39 +02:00
Corvus Corax
cd2cc821d6
made event dispatcher a callback
2013-06-27 18:51:35 +02:00
Brian Webb
2aea2342ab
OP-932 Adds a direct PPM channel on each Tx packet when in PPM mode, and adds a PPM only mode that uses a 9600 bps air datarate. Also updates the OPLink configuration tab and moves all OPLink configuration to the OPLink configuration tab on the Revo, and customizes the OPLink configuration tab for the Revo.
2013-06-26 18:01:54 -07:00
Brian Webb
774a74884a
OP-932 Replaces the RFM22B PPM/receiver code with an OPLinkReceiver UAVObject. This object is generated on a coordinator OPLink, and is used by both the OPLink to generate PPM output, and the OPLinkReceiver on the Revo.
2013-06-26 17:57:11 -07:00
Brian Webb
8c370df319
OP-932 A significant re-work of the OPLink and configuration of the OPLink. Auto-configuration is removed, and remote modems are bound the coordinator, rather than the other way around. Timing of the radio link is also significantly changed. The rfm22b code is also simplified so that it only sends packet, and has no notion about what those packets are, so the rfm22b is converteded to simply a com type device.
2013-06-26 17:56:56 -07:00
Brian Webb
08efc8d152
OP-932: Adds an oplink receiver device, which is based on the gcs receiver device, but uses the OPLinkReceiver UAVObject. The OPLinkReceiver packets are generated on the OPLink modem.
2013-06-26 17:56:20 -07:00
Alessio Morale
0b8d18ae49
OP-994 Move common defines to architecture specific header
...
+review OPReview-506
2013-06-24 18:50:44 +02:00
Alessio Morale
840e6aa4f7
OP-994 Move temp calculation to a macro defined in pios_board.h as it is achitecture dependant
...
+review OPReview-506
2013-06-15 18:47:33 +02:00
Brian Webb
789930db45
Moved PIOS_TASK_MONITOR_Initialize to before EventDispatcherInitialize. The event dispatcher creates a task that registers itself with the task monitor. It is unlikely that the task will start before the task monitor is initialized, but not impossible (at least on the F4 targets, I don't think).
2013-06-09 20:16:40 -07:00
Alessio Morale
bdd80a63c9
OP-994: Refactor/Cleanup of cpu temp measurement: fixed declarations for Voltage Scale constants
2013-06-08 13:46:57 +02:00
David Ankers
69ede538c9
Update date bu just an easy ay to start review +review OPReview-485
2013-05-26 17:50:44 +10:00
David Ankers
2f9c9df736
Increase the size of the USB Descriptor array to take extra char
2013-05-26 17:03:48 +10:00
David Ankers
7a9466bbf9
State in the header which board this is for
2013-05-26 16:12:35 +10:00
David Ankers
f7a9f94a36
Missing file header
2013-05-26 16:09:55 +10:00
David Ankers
a5b856d1bc
Change board description name to OPLink Mini
2013-05-26 16:04:55 +10:00
David Ankers
d5eccea78f
Comment and header renames, change PipX to OPLink Mini
2013-05-26 15:48:02 +10:00
Sexy Pony
900f643bbd
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
2013-05-19 17:37:30 +03:00
Alessio Morale
ab7af16be3
Merge branch 'amorale/OP-901_lib_udates-usb_fixes' into HEAD
...
Conflicts:
flight/pios/stm32f10x/library.mk
flight/targets/boards/revoproto/firmware/pios_board.c
2013-05-19 15:01:08 +02:00
Alessio Morale
c1f767b12d
Merge remote-tracking branch 'origin/amorale/OP-954_logfs_settings_in_internal_flash' into next
...
Conflicts:
flight/pios/common/pios_flashfs_logfs.c
2013-05-18 15:53:25 +02:00
Brian Webb
bc4f615c25
Adds setting HSE_VALUE on all F1 targets (should only be necessary if the HSE clock is not 8MHz).
...
Moves the CMSIS system_stm3210x.c from library.mk to the individual Makefiles for the F1 targets. This allows for custom SystemInit functions where necessary.
2013-05-17 22:01:48 -07:00
Alessio Morale
67e41c34fc
Merge remote-tracking branch 'origin/next' into amorale/usb_fixes
2013-05-17 22:46:42 +02:00
Richard Flay (Hyper)
a6aedee9fa
Merge branch 'next' into brian/support_inverted_USB_vsense
2013-05-17 05:54:42 +09:30
Alessio Morale
6ba15ebc53
OP-954 Fixes from review:
...
- CopterControl target fix
- tabs in Nakefiles
- Removed duplicate stale settings and clean empty lines in osd Makefile
+review OPReview-470
2013-05-15 23:18:50 +02:00
Alessio Morale
c80f01dff9
OP-954 Rename the legacy PIOS_INCLUDE_FLASH_SECTOR_SETTINGS to PIOS_INCLUDE_FLASH_LOGFS_SETTINGS
...
+review OPReview-470
2013-05-15 23:16:34 +02:00
Brian Webb
156109bb88
Added support for an active low USB vsense line.
2013-05-14 20:37:13 -07:00
Alessio Morale
71cae382ae
OP-954 Update OPLink to support the "UAVObject on a specific LogFS instance" updates
2013-05-14 23:54:50 +02:00
Alessio Morale
07af6b5c80
Added LogFS support for OPLinkMini with internal flash
2013-05-14 23:00:45 +02:00
Alessio Morale
8d57d8ff76
Internal flash settings for F1
...
Conflicts:
flight/pios/stm32f10x/pios_flash_internal.c
2013-05-14 22:58:05 +02:00
Richard Flay (Hyper)
ed68fbe68d
OP-951: Adds -Wshadow to flight CFLAGS and fixes resulting compilation breakage.
...
+review OPReview
2013-05-14 07:01:45 +09:30
