rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-03 11:24:10 +01:00
Code Issues Releases Activity
7,103 Commits 5 Branches 8 Tags 266 MiB
432a6dfd00
Commit Graph

338 Commits

Author SHA1 Message Date
James Cotton
88b483f37d PIOS_MPU6000: Make the driver perform the rotation to bring it into the OP 
coordinate system

Previously there were hacks spread throughout to deal with various ways of
positioning the chips.  Now the driver structure specifies the rotation
of the chip relative to the board layout and the output X/Y/Z are already
in OP convention.

This flag seems to do the right thing for Revolution, CC3D, and RevoMini
 2012-09-11 01:46:22 -05:00
James Cotton
527edcbee9 RFM22b: Get rid of the burst read commands and do a block transfer 2012-09-08 12:39:14 -05:00
James Cotton
1f0004e9db RFM22b: Abstract out the port into the driver initiation 
Also use a separate function to claim the bus semaphore and
assert the CS line.
 2012-09-08 12:38:54 -05:00
James Cotton
68fa464ccf RM: Make the direction of the TX/RX lines come from the configuration file 2012-09-04 23:22:56 -05:00
James Cotton
844d14e2f5 RM (NOT FOR PIPX) Properly select the GPIO->RX/TX mapping 2012-09-04 10:22:04 -05:00
James Cotton
0b947b243d Revert "RFM22b: More block claims for rfm22_txStart" 
This reverts commit fa4ca426abf5671fc7d0b7206f85f14bcbf92c3d.
 2012-09-02 22:44:58 -05:00
James Cotton
dce4f36328 RFM22b: More block claims for rfm22_txStart 
Warning: This patch makes the modem work more poorly
 2012-09-02 22:44:58 -05:00
James Cotton
311bbcb539 RFM22b: Block transfers for more large SPI transfers 
Preallocated buffers with various preambles etc.  Used SPI_TransferBlock for
anything over a few bytes instead of burstWrite.  Also make more of the
communications wrappered in a large semaphore grab using a new rfm22_write_noclaim()

Still needs work - probably because most of the methods to repeated calls they should
all use the noclaim, or more specifically that function becomes rfm22_write/read.
 2012-09-02 14:35:56 -05:00
James Cotton
588297806c RFM22b: Use SPI block transfers for filling the RFM22b FIFO 
Also removed the disable irq line since that was introducing
flight glitches.
 2012-09-01 21:24:42 -05:00
James Cotton
997319ae80 RFM22b: Begin doing blocks of transfers when possible between semaphore claims 
The abstraction should probably be improved but ideally we start using
the DMA SPI transfers for PipX and grabbing/releasing the semaphore less
frequently (e.g. not for each 1-2 bytes).
 2012-09-01 21:07:38 -05:00
James Cotton
d9ec6454c2 PipX: Since we are calling the PipX ISR from user space looks ensure the frequency stays correct. 
Previously it was polling too fast and the PipXStatus was incorrect as a result.  Now make
sure the stats loop only runs at 500 ms.
 2012-09-01 19:13:11 -05:00
James Cotton
b888a137f0 TOFIX: Temporarily remove the transaction lock from the settings as it was causing a deadlock with the radio coms. 2012-08-26 05:02:14 -05:00
James Cotton
042055b29a RFM22b: Call the pendingISR routine from all the user space tasks. Got a valid connection with this. 2012-08-26 04:18:17 -05:00
James Cotton
f7cda1c0c4 RFM22b: No need to initialize the SPI. Done already. 2012-08-26 02:42:18 -05:00
James Cotton
477385ca25 RFM22b: Start to move the ISR into userspace 2012-08-26 02:41:19 -05:00
James Cotton
b1bd6d8583 PIOS_RFM22b: No need to set the SPI clock speed in the RFM22b module - it can be set by the driver configuration. 2012-08-26 00:00:39 -05:00
James Cotton
84d327c46a RFM22b: Claim the bus semaphore before reading and writing. 2012-08-25 23:17:52 -05:00
James Cotton
982750a58f Merge remote-tracking branch 'revo/brian/revo_link' into revo-mini 
Conflicts:
	ground/openpilotgcs/src/plugins/plugins.pro
 2012-08-25 15:05:47 -05:00
Brian Webb
fad32dcc29 Split out the PipX radio interface from RadioComBridge module to a separate Radio module. Now the RadioComBridge module just routes messages between the com ports and handles sending/receiving the PipX UAVOs. 2012-08-25 11:41:32 -07:00
a*morale
789746151a Fixes the selection of the oversample settings from the pios_ms5611_cfg.oversapling configuration 2012-08-25 11:29:01 +02:00
James Cotton
44dc01126e Merge branch 'next' into revo 2012-08-12 16:12:54 -05:00
Stacey Sheldon
07fde38887 hid joystick: factor out min/max range from report items 2012-08-10 23:29:34 -04:00
Stacey Sheldon
5902c19cc3 hid joystick: compress local usages since they're all in the same page 2012-08-08 10:38:43 -04:00
Stacey Sheldon
030d9e84f9 hid joystick: remove unnecessary usage page definitions 2012-08-08 10:15:08 -04:00
Stacey Sheldon
449c7aab7a hid joystick: use 32-bits to represent max range 2012-08-08 00:50:03 -04:00
Stacey Sheldon
94f6344fc5 hid joystick: restructure joystick HID report to work on windows 2012-08-07 21:34:25 -04:00
Stacey Sheldon
ef0c12b1b6 hid joystick: emulate a USB HID joystick using RC Transmitter 
Adds a new RCTransmitter setting for the USB HID interface which
emulates a USB HID joystick.  The scaled RC receiver channels
from any RCVR protocol are passed through to the various emulated
joystick controls.

The main use for this feature is to allow you to use your own RC
transmitter with any RC simulator on a PC.

This is known to work with CRRCsim but should work with any simulator
that supports joystick input.
 2012-08-05 21:45:27 -04:00
James Cotton
61c1771862 Change the constant so LED flashing works properly on Revo 2012-07-28 11:24:28 -05:00
James Cotton
8d4e221412 Remove the disable IRQ commands in PIOS_COM since they aren't needed. 2012-07-13 11:54:12 -05:00
James Cotton
cd311642dd Merge branch 'next' into revo 2012-06-28 10:35:47 +02:00
Stacey Sheldon
154d971d4d flash: don't call vTaskDelay() before OS init 
PIOS_Flash_Jedec_EraseChip is called during early
init when the table_magic has changed.  This call
happens on CC/CC3D prior to the OS being initialized
so it is not OK to call vTaskDelay() yet.

This was leading to boards locking up (no flashing blue
LED) immediately after jumping to the application when
the table_magic had changed or was being init'd for the
very first time.
 2012-06-24 12:23:34 -04:00
James Cotton
01d47d6373 Accidental semicolon led to MPU6000 always failing self test. Another bug 
masked that behavior.  I suck.
 2012-06-11 12:22:24 -05:00
James Cotton
a029fc4656 Merge branch 'next' into revo 
Conflicts:
	Makefile
 2012-06-11 12:05:38 -05:00
James Cotton
93b77becc0 More the system task priority down and increase the timeout for erasing the 
flash so it says completed.  However, it still blocks the system for a long
time.  During an erase the heartbeat will flash at 10 Hz to indicate what's
happening.

This still blocks telemetry even after lowering hte system priority (and there
is a vTaskDelay) which makes me think that the SPI bus being locked is blocking
Sensors or somethign else.  This should not be permited when the system is
armed.

The reason the system locks up during the erase is that the file system
operations occur within the event dispatcher thread.  It is very bad practice
for anything to block this (i.e. callbacks should never take very long).  We
should probably move the object persistence handling into the system thread or
something but that can be a separate issue.
 2012-06-11 12:03:32 -05:00
James Cotton
f5845cb037 Fix self test for MPU6000 so it returns negative values per our standard 2012-06-09 11:18:14 -05:00
James Cotton
f5b2575c88 Merge branch 'next' into revo 
Conflicts:
	flight/PiOS/Boards/STM32F4xx_Revolution.h
	flight/Revolution/System/inc/pios_config.h
	package/Makefile
 2012-06-07 12:45:06 -05:00
James Cotton
7b8110a457 Merge branch 'MikeL' into next 2012-06-07 11:31:41 -05:00
James Cotton
c689bcfb80 Merge remote-tracking branch 'origin/Brian-PipXtreme-V2' into revo 2012-06-07 09:49:18 -05:00
Brian Webb
861bcc46fe Fixed RSSI reporting on PipX. 2012-06-06 21:14:31 -07:00
Brian Webb
e9d0909a68 Further improvements in link reliability on the PipX. 2012-06-06 17:44:56 -07:00
James Cotton
5e01617cbd Merge branch 'next' into MikeL 
Conflicts:
	ground/openpilotgcs/src/plugins/config/airframe.ui
	ground/openpilotgcs/src/plugins/config/configoutputwidget.cpp
	ground/openpilotgcs/src/plugins/config/configoutputwidget.h
	ground/openpilotgcs/src/plugins/config/configvehicletypewidget.cpp
	ground/openpilotgcs/src/plugins/config/configvehicletypewidget.h
 2012-06-06 11:58:06 -05:00
Brian Webb
5876df250d Improved lockups on dropped packets. 2012-06-05 21:10:32 -07:00
Mike LaBranche
0ba8345c51 Merge branch 'next' into MikeL 
Conflicts:
	flight/Bootloaders/Revolution/inc/pios_config.h
	flight/Modules/OveroSync/inc/overosync.h
	flight/Modules/Sensors/inc/sensors.h
	flight/PiOS/Boards/STM32F4xx_Revolution.h
	flight/PiOS/STM32F4xx/pios_iap.c
	flight/Revolution/System/inc/pios_config.h
	ground/openpilotgcs/src/plugins/config/config.pro
	ground/openpilotgcs/src/plugins/config/configccattitudewidget.cpp
	ground/openpilotgcs/src/plugins/config/configvehicletypewidget.cpp
 2012-06-04 16:59:31 -07:00
James Cotton
9f93c9cbec Get PIOS_GCSRCVR working on revo 2012-06-04 09:48:05 -05:00
James Cotton
71e14a691e Merge branch 'next' into revo 2012-06-03 19:00:51 -05:00
James Cotton
e8cf606f16 Add the chip size to the flashfs configuration (should probably go in the chip 
configuration)
 2012-06-02 11:00:42 -05:00
James Cotton
8a6073fbaf Merge remote-tracking branch 'revo/revo-next' into testing 
Conflicts:
	Makefile
	flight/PiOS.osx/osx/Libraries/FreeRTOS/Source/portable/GCC/Posix/port.c
	flight/PiOS.osx/osx/Libraries/FreeRTOS/Source/task.c
	flight/PiOS.posix/posix/Libraries/FreeRTOS/Source/portable/GCC/Posix/port_posix.c
	flight/PiOS.posix/posix/Libraries/FreeRTOS/Source/tasks.c
	flight/Revolution/Makefile
	ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
	ground/openpilotgcs/src/plugins/uploader/devicewidget.cpp
	shared/uavobjectdefinition/taskinfo.xml
 2012-05-28 09:13:26 -05:00
Corvus Corax
978ab5b96c Merge remote branch 'origin/stac/etasv3' into revo-next 2012-05-28 12:56:27 +02:00
Brian Webb
6cb13aa2ba Fixed failed merge with next. 2012-05-20 18:36:08 -07:00
Brian Webb
2f1a9e3e7d Added PPM input to the PipXtreme. Also added configurable GCSReceiver timeout. 2012-05-20 18:30:37 -07:00