rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-02 10:24:11 +01:00
Code Issues Releases Activity
2,072 Commits 5 Branches 8 Tags 266 MiB
6ebc8ccd57
Commit Graph

136 Commits

Author SHA1 Message Date
peabody124
6ebc8ccd57 OP-163 Flight/Guidance: Add variations on position hold to try out. Only one will end 
up in the final code.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2110 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-12 16:57:13 +00:00
peabody124
5850c1804d OP-199 Flight/Stabilization: Increment a counter in actuatorDesired whenever an 
update takes longer than 15 ms

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2109 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-12 04:36:04 +00:00
peabody124
2019edd612 AHRS: Store running time to make detect resets easier. Update OP and AHRS in 
parallel for this update.  Also removed comment for rawhid

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2012 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-27 14:31:32 +00:00
peabody124
9944cdfcb0 Flight/RateDesired: UAVObject for monitoring the desired rate out of 
stabilization for diagnostics

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2004 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-24 20:00:02 +00:00
edouard
82b702e239 Added the new Multirotor shapes to the SystemSettings object, as discussed on the forums. UID has not changed, but you should recompile still (sorry). 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1972 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-17 14:15:47 +00:00
les
6d6ec37474 Manual control: Changed 'Position' stabilization mode to 'Attitude' 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1944 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-11 17:58:11 +00:00
peabody124
4e6f100ae5 Flight: Swap to Les' code for main line 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1920 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-08 15:38:23 +00:00
peabody124
c4cb494a22 UAVOBjects: Just ran object genearator to get things compiling again 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1913 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-07 13:09:35 +00:00
edouard
5c48c29612 Remove example objects from the flight code, not needed anymore 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1905 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-06 21:50:57 +00:00
peabody124
dea5c91646 AHRSCalibration: Make default values correct now Les extended 
uavobjectgenerator to support multiple fields (thanks Les!).  Also
changed default scale on mag to +/-6g

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1899 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-06 14:26:42 +00:00
peabody124
66bf9d53d4 AHRS: Paramaterize the variance used for the indoor algorithm. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1898 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-06 14:26:40 +00:00
kokomojoe
946283d67e OP-185 Flight - Added FirmwareIAP to the module load list in makefile, added uavobjectsinit.c with firmware IAP init calls 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1896 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-06 05:30:48 +00:00
kokomojoe
2fe266650f OP-185 Flight - support files for Firmware IAP object 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1891 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-06 02:06:13 +00:00
les
7ddb0f6f80 Stabilization: Changed to new switch format. Both position and rate modes work. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1886 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-05 14:51:33 +00:00
peabody124
ba3ecada1d Flight/ManualControl: Implemented settings to change what the Mode switch does 
so it can also change parameters of Stabilization.  Please check your aircraft
behavior with this patch, but default behavior should be unchanged.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1878 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-04 19:48:09 +00:00
peabody124
d71e9df8c5 Flight/UAVObjects: Add a few files that were missed earlier, and get posix 
worlking again

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1869 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-04 02:01:31 +00:00
les
05a85c8c95 New stabilization module based on PI-P algorithm used in FlightOS 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1864 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-03 20:39:23 +00:00
peabody124
a9495e2cbb UAVObjects/AttitudeSettings: Remove unused object, moving data to AHRSettings. 
Added attitude bias to AHRSSettings.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1855 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-03 18:14:34 +00:00
peabody124
754200f9cf UAVObjects/Delete old VTOLSettings object 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1854 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-03 18:14:27 +00:00
peabody124
5c9b5f4a99 AHRS: Get calibration working again 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1842 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-02 03:10:04 +00:00
peabody124
0c30101f54 AHRS: Made an object setting to allow the downsampling rate to be changed on the 
fly (EKF rate up to a limit).  Also, now the algorithm selects if you are
indoor or outdoor as well as if you use a mag indoor (if you do set the z
variance higher than it calibrates to).

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1841 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-02 03:10:01 +00:00
peabody124
6d39d85b8f UAVObjects/AHRSStatus: Remove unused fields 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1838 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-02 02:17:29 +00:00
peabody124
2050864e59 UAVObjects/VTOLStatus: Remove unused object. Also added update time to 
indicate stabilization loop time.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1837 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-02 02:17:26 +00:00
peabody124
ea3fb03c7f Flight/AHRS Communications: Switch to Les' very nice UAVObject communication 
scheme

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1835 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-02 02:17:18 +00:00
peabody124
2a93f35807 UAVObjects/MixerSettings: Have values as int8, don't need float resolution 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1832 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-01 20:28:14 +00:00
les
b2d56ca34c AHRS: Added UAVObject based SPI communication between AHRS and OP. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1830 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-01 17:31:13 +00:00
peabody124
c076a695ce UAVObjects/ActuatorSettings: Default values are all 1000 now so that an 
unconfigured motor can't turn on.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1823 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-01 13:45:26 +00:00
peabody124
9f4e3906e3 Flight/Actuator: Made it use the detected dT for the feedforward computation 
and removed the unused field from actuator settings (old setting time and all
the aircraft specific stuff).

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1820 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-01 12:33:33 +00:00
peabody124
2dc40d11a1 Flight/Stabilization: Use the system clock to determine time from previous 
update since now drive by events.  This means StabilizationSettings object
changing so write down your settings.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1819 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-01 12:33:29 +00:00
peabody124
77b68e5169 Flight/Guidance: Initial template for guidance module 
Flight: Create PositionDesired (the active waypoint) UAVObject and make the FlightSituationActual no update since it not used.
Flight: New velocity desired object that passes information between the look computing the desired velocity and the PID loop to get it (updated at different rates)
UAVObjects/PositionActual: Remove unused GPS fields
UAVObjects/PositionActual VelocityActual: Split the velocity into a separate object.  ALso make sure all the information telemetered around is in cm to avoid using floats.
UAVObject/GuidanceSettings: New guidance settings object for the guidance module
Flight/Posix: Add the new objects to the Posix sim
Flight/Guidance: Computes a desired velocity based on position error than runs a PID loop to control roll and pitch to achieve that velocity.  All distances are in cm, and updated the PositionActual fields to reflect this and use int32.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1760 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-26 03:06:27 +00:00
peabody124
a01783b2a8 OP-140 AHRS: Explicilty deal with if it is initialized or not, use that to 
determine retransmitting calibration, home location and such.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1755 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-25 21:05:38 +00:00
peabody124
9b28f2d72c OP-167 OP-157 AHRS/Calibration: Added mag scale and really cleaned up calibration. 
Calibration should take less time now too (using second moments to estimate
variance in one pass).  Now need to change to multiple messages to get the
calibration in to keep the request message size minimal.  Also currently
running sensor calibrate doesn't store the gyro bias so if you want to use this
you'll have to tweak it manually.  I'll fix that step tomorrow.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1741 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-25 09:20:38 +00:00
edouard
eedf85a5ac OP-138 Start of the new Mixer configuration interface, for fixed wing only. This does not work yet, takes a long time to fully implement. 
The system settings UAVObject is updated, you will have to recompile your firmware. If you want to take a look and let me know, please do!



git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1737 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-24 20:39:37 +00:00
corvus
1472b342c1 1.0 Featur Freeze - 
Removing some Experimental and Incomplete Modules and their UAVObjects not suited for 1.0
- they will be moved into an experimental branch:

Navigation     : experimental code only
FlightSituation: experimental code only 
Guidance       : preliminary draft - possibly to be replaced by peabody124 position hold code if finished in time.



git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1729 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-23 22:05:03 +00:00
corvus
e44045f422 OP-165 : Guidance Module 
Creating GuidanceModule together with PositionDesired UAVObject (as discussed),
so dschin and me can work on it :-)
Will compile and (on sim_posix) execute, but PID logic is yet untested and preliminary.



git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1722 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-22 22:16:48 +00:00
les
ef7ee86d45 Mixer: zero throttle shuts off motors and changed MixernMatrix to MixernVector 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1710 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-21 19:31:17 +00:00
peabody124
f96654ace1 Adding mixerstatus/mixersetting uavobject files that were missed 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1701 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-21 07:08:51 +00:00
les
875437f483 Added matrix based actuator mixing. Note the makefile is set to use the original actuator code. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1698 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-20 19:27:08 +00:00
peabody124
3b015b41c5 Flight: Got a much nicer arming/disarming system going. Made it a separate flag in the end to allow testing the stabilization code with motors not running. Also changes maxRoll/maxPitch/maxYaw to uint8 to keep object size smaller - no reason for float precision for this. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1660 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-16 15:41:11 +00:00
peabody124
a6e71177e4 AHRS: Yaw stabilization now supports rate stabilization or heading hold. Also need to cleanly support rate stabilization on all the other axis. Les suggested this be in manual mode which will require changing the logic somewhat (essentially for vtol it will always be running through the Stabilization module) in an aircraft dependent manner. An alternative would be a stabilization flag indicating to do full attitude hold, attitude + yaw stabilization, or all axis gyro stabilization. This would be my preference. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1659 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-16 15:41:08 +00:00
peabody124
885c966e53 AHRS: Added a tracker for number of ADC updates the EKF misses. Also updated the Telemetry autogenerated files to accomodate the 11500 baud rate. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1652 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-16 02:59:00 +00:00
peabody124
19e80da928 AHRS: Update UAVObject with information about AHRS rate 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1650 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-16 01:54:21 +00:00
pip
22b9b2512e Added a 115200 baud telemetry option to the OP main board/UAVTalk. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1632 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-15 14:43:42 +00:00
peabody124
c376711405 Flight/Stabilization: Make the derivative account for the sampling time (dAngle/dt) for the PID loop since integral does and also make the integral bounds uavobject settings. It was originally bounded by constant/Ki but I'm not sure why as you change the gain of the error integral you also want to decrease the maximum error it can cause. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1590 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-12 02:54:41 +00:00
peabody124
8999355327 Flight: Made actuator a periodic task. I don't think the queue is low enough latency - should figure out how to make this happen as callback is the right way to go. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1589 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-12 02:54:38 +00:00
peabody124
dceb20b16d Flight: VTOLStatus object that returns the thrusts on all the engines 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1588 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-12 02:54:34 +00:00
peabody124
bba3b0c64a Flight: VTOLSetings object to contain the mixer settings for VTOL crafts 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1587 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-12 02:54:30 +00:00
peabody124
f9a0b799a2 Foolishly forgot object like I always do 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1529 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-04 22:01:11 +00:00
peabody124
c21d058110 Flight: Added ability to use a third accessory input. Currently using that to select tuning roll/pitch bias and PID tuning. I also _STRONGLY_ recommend if you enable these accessory channels (and thus these features) you make the saved meta data for the StabilizationSettings and AttitudeSettings read-only, so only on flights where you mean to can you change these settings. I'm also not convinced about the interface - it seems like flicking TX switches to get into adjustments is a recipe for disaster. Probably need to just control through GCS. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1526 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-04 17:08:02 +00:00
peabody124
45e8131a30 Flight: Added ability to use additional TX inputs to tune attitude bias. Note this form of the calibration is temporary and will likely be replaced by a rotation matrix to deal with more general rotations. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1525 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-04 17:07:59 +00:00