1
0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-11 19:24:10 +01:00
Commit Graph

29 Commits

Author SHA1 Message Date
Alessio Morale
b1360f8136 OP-782 move FirmwareIAPStart from firmwareiap.h to matching .c file. 2012-12-30 12:32:00 +01:00
James Cotton
a0b7453580 Make the firmwareIAP variable not a global 2012-04-03 02:07:03 -05:00
Stacey Sheldon
6bb4f0c61d leds: use boot-time config for PiOS LED layer
LEDs are now configured based on a board-specific initialization
in PIOS_BOARD_Init().

LEDs are now named:
  PIOS_LED_HEARTBEAT
  PIOS_LED_ALARM
2012-01-22 18:22:59 -05:00
James Cotton
96c2d24253 Merge branch 'next' into camera_stabilization
Conflicts:
	flight/CopterControl/Makefile
	flight/CopterControl/System/coptercontrol.c
	flight/Modules/Actuator/actuator.c
	flight/Modules/GPS/GPS.c
	flight/Modules/ManualControl/manualcontrol.c
	flight/Modules/Stabilization/stabilization.c
	flight/Modules/System/systemmod.c
	shared/uavobjectdefinition/manualcontrolsettings.xml
	shared/uavobjectdefinition/stabilizationdesired.xml
2011-07-30 10:06:10 +09:00
Mathieu Rondonneau
612a439199 OP-423: simplify the MODULE_INITCALL macro and remove the ordering loops 2011-07-12 20:44:32 -07:00
James Cotton
53ca934b2b Merge branch 'heli_stabilization'
Conflicts:
	flight/CopterControl/System/inc/pios_config.h
	flight/Modules/Attitude/attitude.c
	flight/Modules/ManualControl/manualcontrol.c
	flight/Modules/Stabilization/stabilization.c
2011-07-12 13:28:20 -05:00
Mathieu Rondonneau
9b9b5a1367 OP-423: remove ';' at the end of macro 2011-07-05 19:44:54 -07:00
zedamota
567e3ffcad OP-542 Board resets with new Uploader
IAP module now checks magic value
2011-06-30 12:17:27 +01:00
Mathieu Rondonneau
de55c56427 OP-423: Change capital on macro to be uppercase for consistency. 2011-06-24 22:03:03 -07:00
Mathieu Rondonneau
fc1e3f574c OP-423: Split task create and module init in order to postpone task creation once the full heap is available.
Also implement some ordering (quite ugly still) in the module init and task creation order so we can decide which module to start/init first
and which module to start/init last.
This will be replaced/adapter with the uavobject list later (once it's implemented).
reserving some space for module init and task create parameters to customize module/task creation (this will be usefull once we get the list and customization from customer).

Changes have been made for OP and CC. Tested comped with CC,OP, sim_posix.
Only ran on bench with CC for couple of minutes (code increase expected but no dropping of stack which is good).

This gives task creation at the time wherethe all heap is available.
2011-06-19 22:35:40 -07:00
James Cotton
5044ea36de Start initializing objects in the modules that consume them. Shouldn't affect
OP yet but not tested.
2011-06-18 14:20:51 -05:00
Mathieu Rondonneau
65cf467ca4 OP-423: move the module initialize funtion into a specific section for OP and CC.
- create linker section for those <module>Initialize()
- later this list will incorporate parameters as well. (this probably will be more a OP feature to swap/remove/delete module on the fly.
- this is not done at compile time anymore by Makefile.
- this will allow us to have control on the module start at run-time (not implemented but build the ground for it).
- this simplify the startup (Part of code re-org).
- this change does not affect sim_posix and win32 (since they don't need that)
- ensure it's compiling for PiOS.posix
- port to PiOS.win32 but not tested (not compiled)
- tested on CC
- compile on OP.
- this free ~200 bytes.
- current avalable bytes (is we keep the same remaining bytes on the stack than before) is easily passed the 1.2Ko mark on CC with new gcc (4.5.2)
- this does not include init-reorg for each module (I still think more can be freed)
2011-06-16 22:13:19 -07:00
Stacey Sheldon
96827eecff build: Make all flight sw use pios_board_info_blob
Now that every bootloader build has a board info blob,
make all fw and bl images use it.

The following MACROS are removed:
  BOARD_TYPE, BOARD_REVISION, BOOTLOADER_VERSION,
  START_OF_USER_CODE, HW_TYPE

These values are now ONLY available from the bootloader
flash via the pios_board_info_blob symbol.  These values
must not be #defined or otherwise hard-coded into the
firmware in any way.  The bootloader flash is the only
valid source for this information.

NOTE: To ensure that we have an upgrade path from an
      old bootloader (without board_info_blob) to a
      new bootloader (with board_info_blob), it is
      essential that the bu_* targets do not depend
      on (or validate) the board_info_blob being present
      in the bootloader flash.
2011-05-24 00:58:10 -04:00
James Cotton
fdd591b700 OP-488: If the FirmwareIAP receives a halt signal but system is not disarmed
abort the halt.
2011-05-10 14:40:21 -05:00
Corvus Corax
eb9ccc2f9b OP-383 Review 11 : Removed commented out unused variables as directed by review 2011-04-25 16:36:23 +02:00
Corvus Corax
5d952f81e3 PIOS: BL_HELPER: refactored function names 2011-04-23 21:11:17 +02:00
Corvus Corax
150464344d BL_HELPER: call CRC_Ini() from within CRC check function 2011-04-23 20:55:21 +02:00
Corvus Corax
357bc369db PIOS: Bootloader Helper functions should sit in HAL, not duplicated in every single architecture. 2011-04-23 19:40:41 +02:00
Corvus Corax
192e31986d PIOS, Modules/FirmwareIAP: Use correct HAL for CPU serial 2011-04-23 18:30:32 +02:00
elafargue
e4112e210f Reduce size of FirmwareIAPObj to 40 bytes: only takes the 40 first bytes of the firmware description, ignores the rest. Makes the FWIAP UAVObject more decent size-wise, and does not break USB TX anymore. 2011-04-19 20:45:49 +02:00
elafargue
45e92d654e Implemented support for the Unique STM32 CPU serial number in the firmwareIAP object. 2011-04-19 00:31:20 +02:00
edouard
bce3d21a0f Fix FirmwareIAP module, as it failed to reset the board if the object was queried before for other purposes.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3080 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-26 12:00:08 +00:00
edouard
f19b0efc6f CC-40 Implemented support for FirmwareIAP on Coptercontrol: you can now use the "Halt" command on the uploader gadget.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3070 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-25 13:50:13 +00:00
peabody124
b76a235940 OP-317: Fixed the FirmwareIAP resetting the AHRS board. Sorry this took me so
long to do.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3029 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-12 09:08:12 +00:00
peabody124
200f9a7247 FirmwareIAP: Whitespace fix, spaces to tabs
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2657 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-01 02:17:51 +00:00
peabody124
29ad7b3017 CC-13 Get FirmwareIAP reset working on CC
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2649 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-01 01:55:54 +00:00
peabody124
42b21a2697 OP-300 FirmwareIAP: Change to use event dispatcher callback to determine when
to reset OP (sends reset command to INS)

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2648 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-01 01:55:43 +00:00
edouard
b3ca037308 OP-277 Update all files to use a BOARD_TYPE and BOARD_REVISION scheme through the whole codebase.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2458 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-16 20:41:55 +00:00
peabody124
fc54159369 OP-265 Flight reorganization of UAVObjects and Modules up a directory
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2415 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-14 01:38:19 +00:00