rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2025-01-23 08:52:10 +01:00
Code Issues Releases Activity
2,262 Commits 5 Branches 8 Tags
Commit Graph

120 Commits

Author SHA1 Message Date
edouard
4ee9cf7aad GCS/Config gadget: problem with GCS crashing on input channel assignement should be fixed. Was triggered whenever no input channel was assigned to flight mode, as Corvus found out, thanks! 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2277 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-23 22:28:24 +00:00
edouard
fc27419cf6 OP-220 1st attempt at "horizontal bias calibration" for the AHRS. Very basic calculation over 100 samples, be my guest to make it more sophisticated if necessary, all the basics are there, you just have to plug a better algo! 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2271 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-22 15:31:37 +00:00
edouard
4be34fdb0f Modified all channel naming internally to use Channel 1 to Channel 8, instead of the previous convention of Channel0 to Channel7. 
BEWARE: I have not flown my quad with this code, so please be careful, test, and report!



git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2234 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-13 23:54:30 +00:00
edouard
0fe666b7a2 Config gadget: Forward-pointing arrow on multirotor shapes in case those were ambiguous, and more tooltips for the servo config tabs. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2201 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-07 21:40:54 +00:00
edouard
f0bc081ae9 Disable actuator combo box on the config dialog, because of the risk of creating an inconsistent mixer. Letting the user change there was misleading. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2194 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-05 17:45:32 +00:00
peabody124
6f1e7b4e41 AHRS: Add a configuration to export the sensor data either with or without INS 
bias correction.  This is useful for stabilization to get rid of the gyro bias.
Making it an option is important for calibration.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2189 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-04 17:34:25 +00:00
edouard
3069f81000 Modify AHRS config gadget so that Mag variance gets graphed in a meaningful way. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2180 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-01 19:28:09 +00:00
edouard
ecb5c719d2 Get rid of yet more compile-time warnings. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2124 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-14 15:25:14 +00:00
andrew
ca16298793 OP-138 Minor changes to UI layouts to scale better. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2104 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-11 07:34:27 +00:00
andrew
1dae56ae3c Modified UI for ccpm to scale better and have less wasted space 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2094 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-08 06:02:43 +00:00
andrew
3e5797a8d2 Update the curve generation UI to have range of -1 to 1 for the pitch curve widget 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2061 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-03 04:30:54 +00:00
andrew
0a2cfbacc7 Updated MixerCurveWidget so that it can have ranges other than 0 to 1. 
Default behaviour not changed.
New functions allow the setting of the max and min values for the curve.
0 to 1 range is needed when output is used for motors.
-1 to 1 range is needed when output is used for a servo.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2060 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-03 03:38:22 +00:00
andrew
206700830e Minor UI changes to ccpm config 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2047 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-31 06:10:19 +00:00
andrew
bc8ec75ed5 Updates to ccpm mixer ui. 
the curve settings now update the MixerCurveWidgets when generated or manually edited.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2046 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-31 05:55:23 +00:00
andrew
beda5965bf added function to MixerCurveWidget to update an existing curve from code without deleting the existing one. 
Using the initCurve function to update a widget that had a slot connected to its curveUpdated signal caused the app to crash.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2045 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-31 05:54:10 +00:00
edouard
a05ed34e77 OP-138 Get rid of object scene removal warning on curve widget. Also delete objects properly when reseting the curve. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2037 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-30 10:41:41 +00:00
edouard
88a199d20e OP-138 Finishing touches to the custom mixer editor (curve reset buttons, value displays, etc.) 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2036 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-30 10:16:01 +00:00
andrew
c7b6341b21 Improvements to the ccpm curve mixing UI 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2035 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-30 05:15:39 +00:00
edouard
dbe20a7eab OP-138 Editing of Custom mixer table checks for bounds (-127/127), and sending to ram/sd now works. This interface 
should be more user friendly that the uavobjecteditor.




git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2034 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-29 22:36:31 +00:00
edouard
739f4e468f OP-138 A few missing bits in the tricopter mixer settings, sorry... 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2033 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-29 20:41:58 +00:00
edouard
e528cc306b OP-138 Support for Tricopter with yaw channel in the config gadget. Please please double check the mixer before flying, this is untested! 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2018 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-27 21:54:42 +00:00
edouard
d232461f9d OP-138 All multirotor frame types except Tricopter now supported, but... not tested yet! 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2008 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-25 21:55:04 +00:00
edouard
9ad1618739 OP-138 Quad and Hexa implemented, custom table works (read only, not edit), and code improved to enable definition of matrices 
in simple tables instead of ugly lines of code. Testers needed. Cautious testers. Also reshuffled the AHRS UI to put 6-point above sensor noise.
Next will be octo and coaxial frames.




git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1999 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-21 22:05:07 +00:00
andrew
2a47f4baca more modifications to UI for ccpm mixing. 
will now read back mixer settings from the flight hardware and try to determine the swashplate config automatically.
Looks good but only basic testing performed so far.
this has not been tested for flight in it's current form.
Use at own risk! 


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1994 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-20 05:04:19 +00:00
edouard
da84b1fc76 OP-138 Custom airframe table now displays the generated mixer matrix and curves. Display only, editing it won't change the mixer. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1982 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-17 19:15:05 +00:00
edouard
bdba5c9168 OP-138 Config gadget: display the new multirotor shapes. Mixer code is not done yet! 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1976 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-17 15:11:37 +00:00
andrew
593c947f5e minor modifications to UI for ccpm mixing. 
better integration into config gadget (now only one set of buttons)
this has not been tested with hardware in it's current form.
Still need to make UI small screen friendly.
Use at own risk! 


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1963 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-16 14:05:51 +00:00
edouard
d8086d6b72 OP-138 Small updates to config widget, start of custom configuration interface, lots of work to do still... 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1961 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-14 21:48:58 +00:00
edouard
f2681ef2c4 OP-138 Feed forward tuning is now working. Watch out for stray props! For safety reasons, the FF tuning will only run if all three checkboxes are checked. Otherwise, follow the tooltips (or the new wiki). 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1957 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-13 21:09:53 +00:00
andrew
9aae70fedf Most functionality is now in the UI for ccpm mixing. 
Currently this will not update hardware correctly... 
but it will set the matrix under the Advanced Settings tab.
Do NOT use for flight!

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1952 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-13 06:06:32 +00:00
edouard
c2664a7843 OP-138 Various updates to config gadget: new quad shapes in the artwork, new tooltips, and start of the feed forward testing interface, with foolproof user safety (tm) built it... 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1950 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-12 21:41:06 +00:00
andrew
093e475dfc continued modifying UI for ccpm mixing. 
NONE of this has not been tested with hardware in it's current form.
Use at own risk! 


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1946 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-12 05:12:56 +00:00
edouard
1824440c8e OP-190 Added support for the flightmode switch settings in the config gadget. Let me know if you like the UI! 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1945 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-11 19:03:27 +00:00
andrew
f7bf258a50 Started to modify UI for ccpm mixing to integrate it into the look and feel of the config gadget. 
Most of the functionality has not been implemented yet.
NONE of this has not been tested in it's current form.
Use at own risk! 


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1942 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-11 05:34:52 +00:00
edouard
4ec3f3fe4c OP-138 Hexacopter support in the config gadget. NOT TESTED on a real frame, do it at your own risk... and report, please! 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1939 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-10 13:45:10 +00:00
edouard
64fb124856 OP-138 Update fixed wing mixer computations to be compatible with the -127/127 range as per the latest UAVObject updates. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1938 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-10 12:56:44 +00:00
edouard
4dae7ef2df OP-138 Multirotor mixer supports adjustment of weight of Roll/Pitch/Yaw on quad + and X configurations. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1937 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-10 12:04:05 +00:00
edouard
706e418990 OP-138 : integration of Andrew's Heli mixer UI into the config widget. Not very well integrated, but the code is there, will improve over the next few days. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1936 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-10 08:02:44 +00:00
pip
3a2fe4587d Fixed usleep windows compile problem 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1934 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-10 07:32:59 +00:00
peabody124
e72b6051b5 AHRS: Make mag variance account for the vector length of magnetic field. Also 
moved around where the axis are swapped and made the negative sign come from
calibration.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1931 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-10 00:46:01 +00:00
peabody124
9ec694cc40 Ground/AHRSCalibration: Account for conversion in AHRS 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1918 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-08 15:38:16 +00:00
peabody124
ecf4e74a71 Ground/AHRSCalibration: Make mag's calibrate properly 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1900 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-06 14:26:44 +00:00
andrew
10a69a3c2c Added ccpm_setup.svp to config resource file 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1872 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-04 04:08:29 +00:00
peabody124
07f8a227fa Ground/AHRSCalibration: Keep in sync with object changes 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1866 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-03 22:08:34 +00:00
andrew
5c4331fe32 added ccpm swashplate image for config gadget. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1845 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-03 03:55:41 +00:00
peabody124
5c9b5f4a99 AHRS: Get calibration working again 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1842 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-02 03:10:04 +00:00
peabody124
0c30101f54 AHRS: Made an object setting to allow the downsampling rate to be changed on the 
fly (EKF rate up to a limit).  Also, now the algorithm selects if you are
indoor or outdoor as well as if you use a mag indoor (if you do set the z
variance higher than it calibrates to).

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1841 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-02 03:10:01 +00:00
peabody124
2a93f35807 UAVObjects/MixerSettings: Have values as int8, don't need float resolution 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1832 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-01 20:28:14 +00:00
edouard
8161d25774 OP-138 Yaw mixing was inverted in the config gadget! This update works for me, with the quad layout in the gadget's picture. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1827 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-01 16:25:21 +00:00
edouard
b80d2ae4c5 OP-138 Support Max Accel in the matrix mixer from the config gadget. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1826 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-01 15:49:54 +00:00