James Cotton
b1e0366525
Merge remote-tracking branch 'origin/CorvusCorax_unidirectional-GPS-com' into next
...
Conflicts:
flight/OpenPilot/System/pios_board.c
2011-09-04 13:33:52 -05:00
Stacey Sheldon
a72c657e21
rcvr activity: Speed up activity acquisition
...
Activity detection logic can now move through
the active receivers more quickly.
2011-08-27 20:17:56 -04:00
James Cotton
6514fd95c7
Also initialize the ReceiverActivity object in manual control
2011-08-27 16:08:57 -05:00
James Cotton
dc340596f5
Merge branch 'next' into GCS_ChangesToUI-RuntimeCFG
...
Conflicts:
flight/CopterControl/Makefile
flight/OpenPilot/System/pios_board.c
flight/OpenPilot/UAVObjects.inc
flight/PiOS/STM32F10x/pios_spektrum.c
ground/openpilotgcs/src/plugins/config/config.pro
ground/openpilotgcs/src/plugins/config/configgadget.qrc
ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
shared/uavobjectdefinition/hwsettings.xml
2011-08-27 15:26:05 -05:00
James Cotton
1d77d77832
Merge branch 'stac/use-malloc-failed-hook' into next
2011-08-27 00:24:13 -05:00
Corvus Corax
54ecf233f3
Modules/PS: typo fix
2011-08-25 15:13:50 +02:00
Corvus Corax
7e396efbbf
Modules/GPS: Assert buffer creation
2011-08-25 15:11:29 +02:00
Corvus Corax
dfdea16065
Modules/GPS: Make GPS COM unidirectional (rx only) and use smaller, runtime allocated heap buffers
2011-08-25 14:46:30 +02:00
Corvus Corax
697ac6067e
OP-567 Modules/GPS: Block in PIOS_COM, not in TaskDelay - or we will miss updates!
2011-08-25 13:33:41 +02:00
Stacey Sheldon
edc0caf521
heap: set memory critical alarm on malloc failures
...
Activate the FreeRTOS malloc failed hook and use it
to set the memory critical alarm.
2011-08-21 23:14:32 -04:00
Corvus Corax
838149b53f
GPS: homelocation init is optional, satellites must be initialized
2011-08-21 18:20:33 +02:00
James Cotton
368323fd59
Merge remote-tracking branch 'origin/james/erase_settings' into next
2011-08-20 13:07:01 -05:00
Corvus Corax
9bba1f7ae9
Posix: fix object initialization where necessary
2011-08-19 18:36:30 +02:00
James Cotton
ab7e57ad2b
Initialize objects for guidance in the correct place. Init some objects in
...
pios_board_posix since AHRSComms not around.
2011-08-19 09:52:05 -05:00
James Cotton
482bec497b
Revert "Fixed modules that didn't initialize used UAVObjects correctly"
...
Modules should initialize their settings and the objects they source. Not just
everything.
This reverts commit 9ad85e9b7b
.
2011-08-19 09:44:38 -05:00
Corvus Corax
9ad85e9b7b
Fixed modules that didn't initialize used UAVObjects correctly
2011-08-19 13:20:15 +02:00
Corvus Corax
f86e53bf91
Merge branch 'OP-536_CorvusCorax_ObjectOrientedFirmwareUAVTalk' into next
...
Conflicts:
flight/Modules/Telemetry/telemetry.c
2011-08-19 12:10:40 +02:00
Corvus Corax
6fe495c088
Merge remote branch 'origin/next' into OP-536_CorvusCorax_ObjectOrientedFirmwareUAVTalk
...
Conflicts:
flight/Modules/Telemetry/telemetry.c
2011-08-17 08:30:32 +02:00
James Cotton
35eef66bfe
OP-557: Add a UAVO access method to erase the entire flash chip. Normally not
...
needed by users because if too much changes I change the FS magic and trigger a
wipe.
Possibly the erase should require a particular "magic" object id value to
execute? This would make it harder to do manually through UAVOs though.
2011-08-15 10:33:27 -05:00
James Cotton
86b652bbab
Merge branch 'next' into camera_stabilization
2011-08-14 18:07:57 -05:00
zedamota
e736b17cc4
Merge remote-tracking branch 'remotes/origin/next' into GCS_ChangesToUI-RuntimeCFG
...
Conflicts:
ground/openpilotgcs/src/plugins/config/config_cc_hw_widget.cpp
ground/openpilotgcs/src/plugins/config/configgadgetwidget.h
ground/openpilotgcs/src/plugins/config/configstabilizationwidget.cpp
2011-08-14 15:48:16 +01:00
James Cotton
a2b76adc33
Attitude: Do not start attitude estimation until accel data appears. This
...
fixes the NaN when AttitudeSettings not available.
2011-08-13 18:53:42 -05:00
James Cotton
ec4e23aff9
Camera Stabilization: Bound outputs to [-1,1] although this should be redundant
...
with checks in actuator.
2011-08-11 14:34:38 -05:00
James Cotton
bbe3c1533a
Merge branch 'next' into camera_stabilization
2011-08-10 21:57:45 -05:00
James Cotton
ab288e95ab
Stabilization: Small patch so that by default the integral is zeroed while
...
throttle is low (good for quads) but can be disabled (good for planes and also
testing helis).
2011-08-10 03:51:46 -05:00
James Cotton
f23eaa8273
Make the Actuator pull from the CameraDesired fields
2011-08-09 21:47:42 -05:00
James Cotton
f11aa80444
CameraStabilization: Make the CameraStabilization module put the desired
...
position into another object (will help with configuration).
2011-08-09 20:45:38 -05:00
James Cotton
c4e272b9ad
Merge branch 'next' into camera_stabilization
2011-08-09 20:16:45 -05:00
James Cotton
ec2121bca8
Attitude: Keep first element of quaternion positive
2011-08-08 21:16:04 -05:00
James Cotton
fd86c25b49
Make sure OP compiles with new object init structure.
2011-08-04 15:01:54 -05:00
James Cotton
a592e7d398
ManualControlSettings must be also initialized in pios_board.c
2011-08-04 07:47:50 -05:00
Stacey Sheldon
90b2625deb
rcvractivity: Add tracking of Rx channel activity
2011-08-02 01:27:37 -04:00
Stacey Sheldon
06cdeb7b61
rcvr: support multiple simultaneous receivers
...
Now also supports multiple instances of the Spektrum driver.
These are configured as Spektrum1 and Spektrum2.
2011-08-02 01:22:04 -04:00
James Cotton
cb9c6dfb5e
Change the sequencing of telemetry starting to make sure all the objects that
...
were registered in an initialize and then enumerated by telemetry
2011-07-30 11:31:45 +09:00
James Cotton
ae67c51632
Register some missing objects with their modules
2011-07-30 11:28:21 +09:00
James Cotton
2e5a36a4db
Merge branch 'stac/refactor-usart-com' into camera_stabilization
2011-07-30 10:55:16 +09:00
James Cotton
96c2d24253
Merge branch 'next' into camera_stabilization
...
Conflicts:
flight/CopterControl/Makefile
flight/CopterControl/System/coptercontrol.c
flight/Modules/Actuator/actuator.c
flight/Modules/GPS/GPS.c
flight/Modules/ManualControl/manualcontrol.c
flight/Modules/Stabilization/stabilization.c
flight/Modules/System/systemmod.c
shared/uavobjectdefinition/manualcontrolsettings.xml
shared/uavobjectdefinition/stabilizationdesired.xml
2011-07-30 10:06:10 +09:00
James Cotton
333ab645ec
Dos2unix manualcontrol.c to facilitate merging
2011-07-30 09:55:02 +09:00
Stacey Sheldon
c2fb0d8b43
com: allow run-time allocation of buffers
2011-07-29 15:33:14 -04:00
Stacey Sheldon
5f8760a55c
com: Move buffering out of USART/HID layer and into COM layer
...
This allows the spektrum and sbus receiver drivers to bind
directly to the usart layer using a properly exported API
rather than overriding the interrupt handler.
Bytes are now pushed directly from the usart layer into the
com layer without any buffering. The com layer performs all
of the buffering.
A further benefit from this approach is that we can put all
blocking/non-blocking behaviour into the COM layer and not
in the underlying drivers.
Misc related changes:
- Remove obsolete .handler field from irq configs
- Adapt all users of PIOS_COM_* functions to new API
- Fixup callers of PIOS_USB_HID_Init()
2011-07-27 19:45:38 -04:00
Stacey Sheldon
6580462916
rcvr: specify drivers for groups of channels
...
Each channel was previously tracking a separate driver.
Now, channels are grouped within a channel group to save
RAM used for tracking and to better reflect how channels
are actually mapped.
2011-07-14 23:22:42 -04:00
Mathieu Rondonneau
612a439199
OP-423: simplify the MODULE_INITCALL macro and remove the ordering loops
2011-07-12 20:44:32 -07:00
James Cotton
0aec3b592c
Changing stabilization so that the PIDs are zeroed when not armed, but NOT when
...
the throttle is < 0. This will make things like axis-lock work while armed
without throttle. HOWEVER don't hold your stick in the arming position for a
long time or you can wind up the integrals now.
2011-07-12 14:35:32 -05:00
James Cotton
2c7cfe435f
Somehow this task runs quite a few times at the beginning so dT was going to
...
zero and making the attitude get NaN. Wrote recovery code for that condition
(should never occur) and also force minimum dT to 1 ms (also shouldn't occur)
2011-07-12 14:18:19 -05:00
James Cotton
53ca934b2b
Merge branch 'heli_stabilization'
...
Conflicts:
flight/CopterControl/System/inc/pios_config.h
flight/Modules/Attitude/attitude.c
flight/Modules/ManualControl/manualcontrol.c
flight/Modules/Stabilization/stabilization.c
2011-07-12 13:28:20 -05:00
Mathieu Rondonneau
d38f6167e3
OP-423:
...
Also reduce heap has it does not fit in SRAM anymore (not with current compiler).
(that's ok since if there is more space available, it will be reclaimed).
Merge branch 'master' into OP-423_Mathieu_Change_Init_To_Reduce_Memory_Footprint
Conflicts:
flight/CopterControl/System/inc/pios_config.h
flight/Modules/ManualControl/manualcontrol.c
2011-07-08 06:29:34 -07:00
James Cotton
2d995dc2f7
OP-539: Don't call the gyro setting callback during init because it clears the
...
gyro bias estimation.
2011-07-05 22:27:03 -05:00
Mathieu Rondonneau
9b9b5a1367
OP-423: remove ';' at the end of macro
2011-07-05 19:44:54 -07:00
Stacey Sheldon
740b5f1584
rcvr: convert PWM, PPM, SBUS and Spektrum to use PIOS_RCVR
...
All receivers now fall under the same driver API provided
by pios_rcvr.c.
This is part of a larger sequence of commits that will
switch the receiver selection over to boot time dynamic
configuration via UAVObjects.
2011-07-05 22:03:25 -04:00
James Cotton
ad8876c62a
OP-193: Weak leveling variant on rate mode. Slowly will return to level.
2011-07-04 20:44:55 -05:00