rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-11 19:24:10 +01:00
Code Issues Releases Activity
2,371 Commits 5 Branches 8 Tags 266 MiB
db9bc06a08
Commit Graph

45 Commits

Author SHA1 Message Date
peabody124
ed11e64bb2 OP-251 Watchdog: Get rid of the old extra watchdog module and instead have 
tasks directly update a flag for each module (which they register) and when all
flags set clear the watchdog then.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2365 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-10 00:16:30 +00:00
vassilis
b851c11f53 Flight/Stack sizes: Reduced task stack sizes to free-up memory in preparation of the scripting release. If the firmware is unstable there might be a possible stack overflow, test carefully! 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2350 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-09 00:03:19 +00:00
vassilis
407e660c97 Flight/TaskMonitor: Create TaskMonitor library, used to monitor the remaining task size of all running tasks. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2349 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-08 23:43:34 +00:00
edouard
d8edab8371 Added a (fake) pios_servo module in PiOS.posix, this makes it possible to compile the Actuator module and see servo output values, or at least 
what they would be on a real board. Also fixed a typo in stabilization.c which made me lose time when trying to understand the code...




git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2260 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-20 16:38:17 +00:00
peabody124
4e8c6588b6 OP-156 AHRS: Run the accel data through a fifo so it can output raw data faster 
than the ekf runs and also be more tolerant of timing jitter

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2191 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-04 17:34:29 +00:00
andrew
c94c76ce40 Minor change to give back manual control to an axis when it is set to stabilization = None 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2165 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-27 04:03:37 +00:00
peabody124
d2b468d661 Flight/Stabilization: Need to either set or clear the alarm, but the way it was 
before cleared at the end of each loop - including one after an alarm

Flight/Actuator: Similar change to make sure not having updates from
stabilization (i.e. no AHRS) doesn't trigger a watchdog reset

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2140 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-23 17:13:42 +00:00
peabody124
5850c1804d OP-199 Flight/Stabilization: Increment a counter in actuatorDesired whenever an 
update takes longer than 15 ms

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2109 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-12 04:36:04 +00:00
peabody124
834eecfc1f OP-200 Flight/Watchdog: Have flag that is set from actuator, ahrs_comms, manual 
and stabilization that is monitored by watchdog.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2078 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-05 14:28:21 +00:00
peabody124
a2e0cd2240 Stabilization: Dont make queue respond to both raw sensors and attitude because 
causes it to trigger most of the time every 1 ms which is consuming tons of
CPU.  Also lower the failsafe timeout since its likely due to overloading the
event system and we don't want to delay 100 ms.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2005 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-24 20:00:05 +00:00
peabody124
9944cdfcb0 Flight/RateDesired: UAVObject for monitoring the desired rate out of 
stabilization for diagnostics

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2004 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-24 20:00:02 +00:00
corvus
50574841bd Moved non primary Stabilization modules into Branches 
simple		- outdated - won't compile
Experimental	- outdated - won't compile
les		- development version - not stable
les+corvus	- development version - not stable




git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1993 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-19 19:12:37 +00:00
corvus
8cb04a372f Stabilization: new stabilization variant based on les stabilization module, with several options for coordinate system transformation 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1990 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-18 14:46:45 +00:00
cwabbott
dff66607c7 More UAVObject fixes, stuff to get PiOS.win32 compiling again. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1962 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-16 12:15:47 +00:00
les
6d6ec37474 Manual control: Changed 'Position' stabilization mode to 'Attitude' 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1944 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-11 17:58:11 +00:00
peabody124
dc10998152 Flight/Stabilization: Make any throttle < 0 reset the pid integral windup 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1933 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-10 00:46:06 +00:00
peabody124
ea85e98d7a Flight/Stabilization: Move update time storage to before the set to make sure 
it goes

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1922 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-08 15:38:28 +00:00
peabody124
4e6f100ae5 Flight: Swap to Les' code for main line 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1920 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-08 15:38:23 +00:00
les
7ddb0f6f80 Stabilization: Changed to new switch format. Both position and rate modes work. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1886 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-05 14:51:33 +00:00
les
05a85c8c95 New stabilization module based on PI-P algorithm used in FlightOS 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1864 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-03 20:39:23 +00:00
cwabbott
8d1a99ae15 PiOS.win32: Updated PiOS.win32 makefile for recent UAVObject changes, and also updated the experimental stabilization code to comply with recent changes to the simple code. Nobody uses SiTL anymore :( . 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1858 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-03 18:59:58 +00:00
edouard
eeb5eab177 Flight/Stabilization: fix for -180/+180 yaw transition which caused glitches in the stab module. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1853 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-03 16:43:10 +00:00
peabody124
29b087703b Flight/AHRSComms: Decrease stack size, not needed to be that big. Also made 
ActuatorDesired dT in ms like the uavobject indicates

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1839 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-02 02:17:32 +00:00
peabody124
2050864e59 UAVObjects/VTOLStatus: Remove unused object. Also added update time to 
indicate stabilization loop time.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1837 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-02 02:17:26 +00:00
edouard
d2c1014e29 Re-enabled yaw stabilization after SystemSettings changed. There might be a lingering issue when the 
yaw angle crosses the zero-360 mark, beware.
You can disable yaw stabilization by setting all PID gains to zero for yaw.



git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1828 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-01 16:26:43 +00:00
peabody124
2dc40d11a1 Flight/Stabilization: Use the system clock to determine time from previous 
update since now drive by events.  This means StabilizationSettings object
changing so write down your settings.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1819 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-01 12:33:29 +00:00
peabody124
4461aba6d6 Flight/Stabilization: Move to object event system. Latency from ahrs_comm 
update to actuator update now ~0.7 ms.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1818 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-01 12:33:26 +00:00
peabody124
aa42256ad1 Flight/Stabilization: Convert all PID loops to units of seconds instead of ms. 
THIS MEANS YOU MUST RETUNE YOUR PID LOOP IF YOU'RE FLYING WITH IT

Alternatively divide Kd by 1000 and multiply Ki by 1000

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1782 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-27 09:04:43 +00:00
peabody124
6d0df704a7 Flight/Modules: Corrected code to use tabs 
find ./flight/OpenPilot/Modules/ \! \( -name '*~' -a -prune \) -type f    |
xargs -I{} bash -c 'echo {}; dos2unix {}; gnuindent -npro -kr -i8 -ts8 -sob -ss
-ncs -cp1 -il0 -hnl -l150 {};'

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1776 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-27 07:28:34 +00:00
peabody124
8475a68958 Flight/Stabilization: Keep command and error in deg/s for rate stabilization 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1766 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-26 03:06:54 +00:00
peabody124
11f2b1a8dc Flight/Stabilization: Dont cap error at maximum stabilization value - that is to scale control throws. Create another variable if we want this. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1676 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-17 18:15:02 +00:00
peabody124
41b7a99883 Flight/Stabilization: Yaw rate stabilization error should be normalized by dt 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1669 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-17 02:00:55 +00:00
peabody124
3b015b41c5 Flight: Got a much nicer arming/disarming system going. Made it a separate flag in the end to allow testing the stabilization code with motors not running. Also changes maxRoll/maxPitch/maxYaw to uint8 to keep object size smaller - no reason for float precision for this. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1660 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-16 15:41:11 +00:00
peabody124
a6e71177e4 AHRS: Yaw stabilization now supports rate stabilization or heading hold. Also need to cleanly support rate stabilization on all the other axis. Les suggested this be in manual mode which will require changing the logic somewhat (essentially for vtol it will always be running through the Stabilization module) in an aircraft dependent manner. An alternative would be a stabilization flag indicating to do full attitude hold, attitude + yaw stabilization, or all axis gyro stabilization. This would be my preference. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1659 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-16 15:41:08 +00:00
peabody124
c376711405 Flight/Stabilization: Make the derivative account for the sampling time (dAngle/dt) for the PID loop since integral does and also make the integral bounds uavobject settings. It was originally bounded by constant/Ki but I'm not sure why as you change the gain of the error integral you also want to decrease the maximum error it can cause. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1590 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-12 02:54:41 +00:00
andrew
65dc5e9b04 Yaw stabilisation for the simple algorithm was calculating the error and not taking into account that 350º error is the same as -10º error. 
The resultant error could range from -360º -> +360º
Since this is only used for Helicopters / multi rotors, and the aircraft can rotate in any direction, I added the modulo logic so that it is now from -180º -> +180º this should now take quickest path to correct the error.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1464 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-30 01:20:43 +00:00
andrew
2361af19fb First attempt at ccpm mixing for single rotor helicopter. 
This has throttle and pitch curves implemented and can be configured for many swashplate configurations.

This has flown a 450 clone (with training wheels) and the ccpm worked well.

Still need to neaten up some stuff and work out how to implement yaw stabilisation in manual mode.


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1412 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-26 06:00:57 +00:00
cwabbott
d910b8f756 slight changes to get PiOS.win32 to compile 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1205 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-04 14:21:58 +00:00
corvus
02a78f0470 moved Vassilis stabilization module as of r1153 into Stabilization/simple 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1173 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-28 15:03:55 +00:00
corvus
9ad9ffd466 moved new stabilization code into experimental subdirectory 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1172 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-28 15:00:51 +00:00
corvus
2621d07574 Added UAVObjects: FlightSituationActual NavigationSettings NavigationDesired 
- Added FlighSituation Module (development module for sensor fusion, mostly stub, possibly renamed later)
- Added Navigation Module (development module for navigating towards a point in space - DEVELOPMENT CODE, NOT STABLE YET (I am testing around with this)) 
- Changed Stabilization Module (uses local reference frame now. Stable except for code cleanup/review. Tested in simulator and outperforms old code.)



git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1154 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-26 21:26:28 +00:00
peabody124
d928676f5e More documentation updates, standardizing format to include addtogroup at the beginning of headers so files are associated with modules 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1121 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-16 19:53:35 +00:00
peabody124
99e94228a9 More doxygen updates 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1106 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-16 05:31:11 +00:00
peabody124
1cd81e211f Added Doxygen comments for OpenPilot modules 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1101 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-16 01:02:34 +00:00
vassilis
c74eb2f0e9 OP-26 Flight/Stabilization First release of stabilization module. Tested using FlightGear, default tuning is for the HITL simulation. Works fairly well but a number of improvements can be made to aid tuning. The ManualControl settings must be first set as you would normally do for HITL simulation, flight mode is changed using the mode channel. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@887 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-06-25 02:28:16 +00:00