Brian Webb
5724fa083c
RFM22B: Added link quality calculation based on number of dropped packets. Also added packet error correction, which apparently wasn't being done before.
2012-10-04 21:11:40 -07:00
Brian Webb
9b9d0c0d1e
RFM22B: Added back configuration of the RF Power and RF Datarate. Also added setting of the destination ID in the rfm22b driver.
2012-10-03 20:03:35 -07:00
Brian Webb
a8590045a8
RFM22B: Moved radio status reporting from the radio module into the rfm22b driver task.
2012-10-02 19:52:21 -07:00
James Cotton
879dfed288
RM2/RM1: Make the firmware and bootloader support the pin mappings between these two targets
...
for USB and radio
A side-effect of this is the pipxsettings are no longer populated into the rfm22b cfg structure
as that was made constant to be consistent with other drivers.
2012-10-02 09:31:15 -05:00
Brian Webb
a070e1cc3e
RFM22B: Added PIOS_RFM22B_Receive_Packet function and removed rx buffer.
2012-09-23 08:36:38 -07:00
Brian Webb
a46e3cdec3
RFM22B: All outgoing data to the radio is now going through the PIOS_RFM22B_Send_Packet call. Also removed all global variables with the exception of the rx buffer.
2012-09-22 20:13:11 -07:00
Brian Webb
057227726b
Radio: Make sure pios_packet_handler is set to 0 when radio module is not initialized.
2012-09-22 20:13:07 -07:00
Brian Webb
6623c55846
RFM22B: Moved ISR processing thread into the rfm22b driver.
2012-09-22 20:13:03 -07:00
James Cotton
f3f07682ac
RFM22b radio.c: Increase the stack side for the status task which runs the ISR
2012-09-08 12:43:01 -05:00
James Cotton
1f0004e9db
RFM22b: Abstract out the port into the driver initiation
...
Also use a separate function to claim the bus semaphore and
assert the CS line.
2012-09-08 12:38:54 -05:00
James Cotton
61ff335eaa
RFM22: No need to poll the ISR from two tasks in radio.c
2012-09-02 22:44:58 -05:00
Brian Webb
27fedee3d3
Just return an initialization failure in the radio module when the RFM22B fails to initialize rather than asserting.
...
Signed-off-by: James Cotton <peabody124@gmail.com>
2012-09-01 19:15:13 -05:00
James Cotton
d9ec6454c2
PipX: Since we are calling the PipX ISR from user space looks ensure the frequency stays correct.
...
Previously it was polling too fast and the PipXStatus was incorrect as a result. Now make
sure the stats loop only runs at 500 ms.
2012-09-01 19:13:11 -05:00
James Cotton
042055b29a
RFM22b: Call the pendingISR routine from all the user space tasks. Got a valid connection with this.
2012-08-26 04:18:17 -05:00
James Cotton
477385ca25
RFM22b: Start to move the ISR into userspace
2012-08-26 02:41:19 -05:00
James Cotton
a7b5fcd77c
Monitor the radio threads
2012-08-25 18:48:30 -05:00
Brian Webb
fad32dcc29
Split out the PipX radio interface from RadioComBridge module to a separate Radio module. Now the RadioComBridge module just routes messages between the com ports and handles sending/receiving the PipX UAVOs.
2012-08-25 11:41:32 -07:00
