1
0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-05 13:24:11 +01:00
Commit Graph

55 Commits

Author SHA1 Message Date
Laurent Lalanne
214ae849a2 LP-233 Add MultiShot 5 - 25µs pulses 2016-05-02 20:24:03 +02:00
Laurent Lalanne
2bda2e2901 LP-233 Simplify, same clock used for all OneShot modes 2016-05-02 20:24:03 +02:00
Laurent Lalanne
78be10ff28 LP-233 Multiply / factor instead of scale 2016-05-02 20:24:03 +02:00
Laurent Lalanne
49107e4007 LP-233 Increase Oneshot output resolution 2016-05-02 20:24:03 +02:00
Laurent Lalanne
32a6de6b79 LP-233 Support OneShot42 2016-05-02 20:24:03 +02:00
Laurent Lalanne
3f344bde4d LP-228 Treat Gimbal outputs only if CamStab module is enabled. 2016-03-16 15:58:38 +01:00
Laurent Lalanne
406c381071 LP-206 Add Always stabilized accessory switch - Fix: Allow Accessory3 for arming 2016-03-07 18:26:10 +01:00
Stefan Karlsson
51f0b74e5c LP-129 Remove broken motor scaling modes 2015-09-24 23:02:09 +02:00
Stefan Karlsson
2ab6390cf5 LP-128 Fix scaleMotor attitude problems
The ElevateAndCompress scaling mode doesn't scale linearly as intended
and causes motors to reach the max limit prematurely.

A new mode, MoveAndCompress, has been implemented to get better linear
scaling of the motor output values.
2015-09-22 21:25:56 +02:00
Alessio Morale
bc89c79b7d Merged in skarlsso/librepilot/skarlsso/LP-107_scaleMotor_bug (pull request #46)
skarlsso/lp 107_scalemotor_bug
2015-09-08 15:27:51 +02:00
a*morale
792835c009 Uncrustify 2015-09-05 11:49:43 +02:00
Stefan Karlsson
71f6e82399 LP-107 Use scaleChannel for unscaled motor outputs 2015-09-01 21:17:52 +02:00
Stefan Karlsson
f7b8a57e42 LP-107 Replace the scaling function in scaleMotors
The previous scaling function used in scaleMotor could end up with
output values below the neutral point.

This patch adds a new scaling mode that will try to scale the output
proportionally while still keep all outputs within neutral and max.

The user can select three different modes:
1) NoScaling - Only cap the output values between neutral and max.
2) AddAndSubtract - The previous output scaling method, which moves the
   output values directly proportionally to the amount the max/min motor
    is out of the limits.
3) ElevateAndCompress - The new mode, which elevates all motor values by
   the percentage needed to bring the min motor to neutral, and then
   compress all motor values by the percentage needed to bring the max
   motor down to max.

The motor scaling mode can be selected by setting the
FlightModeSettings.MotorScalingMode UAVO field.
2015-08-31 21:29:48 +02:00
Alessio Morale
538a137bf6 Merged in f5soh/librepilot/laurent/LP-92_Feed_forward_remove (pull request #33)
Laurent/lp 92_feed_forward_remove
2015-08-21 13:35:10 +02:00
Roy Bekken
ad84547637 Update all changed files against GIT log with copyright headers consistency. 2015-08-19 16:15:58 +02:00
Laurent Lalanne
670dbfe9ce LP-92 Remove Feed Forward : flight / ground 2015-08-14 10:54:12 +02:00
Laurent Lalanne
31c30d752f LP-66 Fixed wing : Roll differential mixing on flight side 2015-07-29 06:36:22 +02:00
Alessio Morale
c227686854 uncrustify 2015-05-02 20:27:28 +02:00
RS2K
2fca0b1d9b OP-1835 - Motor Constraints for 15.02.02 - Quick fix to disable clipping. Bit of code not in the original fix I had to deal with. 2015-05-02 13:11:40 -05:00
RS2K
57d062ff67 OP-1835 - Motor Constraints for 15.02.02
OP-1835 - Motor Constraints for 15.02.02
2015-05-02 12:55:43 -05:00
abeck70
5c9b6fac29 OP-1769 uncrustify 2015-03-14 12:15:59 +11:00
abeck70
5e7a3c30e1 OP-1769 ground actuator
code review comment addressed to reduce code size
2015-03-14 12:01:30 +11:00
abeck70
dd2733d73f OP-1769 Ground support review comments 2015-03-11 13:49:21 +11:00
abeck70
f053954228 OP-1769 CC compile fixes 2015-03-10 23:07:14 +11:00
abeck70
52147333ed OP-1769 Ground Support
1. Receiver.c for ground allows disabled channels for all but yaw and throttle
2. Reciever.c applies a deadband on throttle 0 position
3. Arming understands ground have a 0 throttle position
4. Actuator optimisations in general and fixes for mixing
5. Actuator mixer support for reversible motors
2015-03-10 22:54:51 +11:00
Alessio Morale
1f5f5747f7 OP-1685 - Fix glitches on output settings save. It was due to wrong check for bankmode changes. 2015-02-22 14:21:23 +01:00
Alessio Morale
2a90e86e58 OP-1685 - Try to avoid unneded updates to prevent output glitches 2015-02-22 13:12:00 +01:00
Alessio Morale
39513f0533 OP-1685 - Rename OneShot to PWMSync to avoid confusion 2015-02-17 23:20:07 +01:00
Alessio Morale
752f3447d2 OP-1683 - Implement an update skip strategy in single pulse mode when pulse period is higher than the update cycle 2015-02-02 02:58:22 +01:00
Alessio Morale
1d08083375 OP-1682 - OneShot125: Change timer clock to 2MHz (that's available as exact value for current targets), raise timer period to prevent glitches 2015-01-31 14:40:40 +01:00
Alessio Morale
632051c0ac OP-1683 - Increase resolution for OneShot125 running timer at 8MHz, setup automatically rates for OneShot 2015-01-30 21:22:00 +01:00
Alessio Morale
7955f63c98 OP-1683 - Clenaup, trigger update in setfailsafe, Fix standard pwm operation 2015-01-25 21:25:14 +01:00
Alessio Morale
dcc9a5b7dc OP-1683 - Actuator uses "standard" 1000-2000 range and remap it to 125-250 just before sending to servo to prevent any impact on gcs and other blocks 2015-01-24 13:37:00 +01:00
Alessio Morale
47e1312982 OP-1683 - Implement oneshot/oneshot125 mode to actuator module 2015-01-23 23:51:53 +01:00
Alessio Morale
263fd64ab5 Merge branch 'amorale/OP-1274_freertos_v8.0.0' into next 2014-06-22 16:06:21 +02:00
Alessio Morale
eb5deb3eca OP-1274 Remove unneeded cast from task name in xTaskCreate call 2014-06-18 01:47:43 +02:00
Alessio Morale
8710ff4070 OP-1227 Fix high CPU usage: Some minor to Actuator module. 2014-06-08 22:39:16 +02:00
Alessio Morale
be5cc66bd3 OP-1274 fixes for Coptercontrol firmware 2014-05-18 22:56:29 +02:00
Corvus Corax
0ece1a1fb3 OP-1216 removed "reverseThrottle" systemsetting and have reversethrottle implicitly allowed for REVERSABLEMOTOR type outputs 2014-03-09 10:00:58 +01:00
Corvus Corax
148b453aad OP-1216 added new mixer output type "reversable motor" to have engines which can can backwards go to a safe level when disarmed 2014-03-09 01:37:22 +01:00
Corvus Corax
dbbb8d5e0d OP-1216 fixes as suggested in OPReview-645 2014-03-03 18:58:09 +01:00
Corvus Corax
2f57ea2ab3 added missing initializations to allow boot without manualcontrol module 2014-03-02 19:00:37 +01:00
Corvus Corax
f61231f610 OP-1216 moved safety zeroing for channels from Stabilization to Actuators (so it also affects manual mode) 2014-03-02 15:35:39 +01:00
Corvus Corax
37ef381f8d OP-1216 clamping of throttle to -1 in actuators (optional) 2014-02-16 12:27:01 +01:00
Corvus Corax
b5a27d05e7 OP-1197 configurable failsafes OP-1219 thrust control OP-1217 separate manualcontrolsettings apart 2014-02-09 19:37:22 +01:00
Corvus Corax
8b25ac1894 OP-1195 adapted task priorities for manualcontrol and stabilization 2014-02-02 14:13:25 +01:00
Mathieu Rondonneau
23b2907d08 OP-976: Add the ';' back
This compile successfuly with make all_flight
2013-06-03 20:37:40 -07:00
Sexy Pony
900f643bbd Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES 2013-05-19 17:37:30 +03:00
Brian Webb
1608d11416 Cleans up some compiler warnings/erros and adds missing ifdefs around some e.g. WDG calls. 2013-05-14 20:22:54 -07:00
Richard Flay (Hyper)
fbc8bc698f OP-936: Merges branch 'next' into hyper/OP-936_task-monitor-rework, fixes damage/conflicts,
and brings the callback scheduler into the fold.

+review OPReview-461
2013-05-06 19:11:14 +09:30