| .. |
|
pios_adc_priv.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
|
pios_adc.h
|
OP-1828 - Add support for optional analog inputs
|
2015-04-09 00:25:53 +02:00 |
|
pios_adxl345.h
|
OP-1227 Fix high CPU usage: Reduce Accel rate to 1600Hz, optimize sample reading, explicitly set bus speed
|
2014-06-08 21:33:18 +02:00 |
|
pios_bkp.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
|
pios_bl_helper.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
|
pios_bma180.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
|
pios_bmp085.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
|
pios_board_info.h
|
OP-1477 - remove debug infos and add send some relevant informations using SYS message (firmware and board revision/info)
|
2014-09-24 01:06:41 +02:00 |
|
pios_callbackscheduler.h
|
OP-942 duplicated exact API of task_monitor to also monitor callbacks
|
2014-02-07 22:39:16 +01:00 |
|
pios_com_msg_priv.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
|
pios_com_msg.h
|
OP-1275 - add ChangeBaud to PIOS_COM_MSG
|
2014-09-16 00:42:51 +02:00 |
|
pios_com_priv.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
|
pios_com.h
|
OP-1849 Hooks all in place for CDC line state changes to drive port GPIO for DTR
|
2015-04-26 03:05:47 +01:00 |
|
pios_constants.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
|
pios_crc.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
|
pios_debug.h
|
OP-922 Mark PIOS_DEBUG_Panic with attribute noreturn
|
2014-08-16 16:57:50 +02:00 |
|
pios_debuglog.h
|
more intelligent log interfacing, including flash formatting option
|
2013-11-17 20:14:50 +01:00 |
|
pios_delay.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
|
pios_deltatime.h
|
OP-1211 time_measurement_helper
|
2014-02-04 19:05:17 +01:00 |
|
pios_dsm_priv.h
|
OP-1626: Allow binding to happen within satellite binding window.
|
2014-11-29 19:59:18 -08:00 |
|
pios_dsm.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
|
pios_etasv3.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
|
pios_exti.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
|
pios_flash_eeprom.h
|
REVONANO - Add Eeprom support
|
2015-05-18 18:55:25 +02:00 |
|
pios_flash_internal_priv.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
|
pios_flash_jedec_catalog.h
|
uncrustify
|
2014-08-13 15:54:52 +02:00 |
|
pios_flash_jedec_priv.h
|
OP-1405 - Add support for 25qxxx series of flash memories
|
2014-08-02 23:05:36 +02:00 |
|
pios_flash.h
|
REVONANO - Add Eeprom support
|
2015-05-18 18:55:25 +02:00 |
|
pios_flashfs_logfs_priv.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
|
pios_flashfs_objlist.h
|
REVONANO - Readd old objlist FS to be used with EEPROM
|
2015-05-18 18:55:25 +02:00 |
|
pios_flashfs.h
|
yaffs simposix ready for review
|
2014-10-10 13:21:06 +11:00 |
|
pios_gcsrcvr_priv.h
|
Rename flight/PiOS->flight/pios
|
2013-04-25 13:13:41 +03:00 |
|
pios_gpio_priv.h
|
Adds missing pios_gpio_priv.h
|
2013-08-02 22:01:44 -07:00 |
|
pios_gpio.h
|
Moves pios_led functionality to pios_gpio and makes pios_led a thin layer over pios_gpio. Supports configuring multiple sets of GPIOs.
|
2013-07-28 07:01:08 -07:00 |
|
pios_hcsr04_priv.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
|
pios_hcsr04.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
|
pios_helpers.h
|
OP-980 Extended the memory barrier macros and fixed barrier kind in pios_usb_hid
|
2013-06-06 10:26:41 +02:00 |
|
pios_hmc5x83.h
|
OP-1820 - Add mag orientation parameter in hmc configuration
|
2015-04-03 20:40:52 +02:00 |
|
pios_hmc5843.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
|
pios_i2c_esc.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
|
pios_i2c_priv.h
|
REVONANO - Support distinct remaps for SDA and SCL
|
2015-05-18 18:54:52 +02:00 |
|
pios_i2c.h
|
OP-1275 move implementation specific enums out of common pios_i2c_priv.h
|
2014-09-16 00:42:50 +02:00 |
|
pios_iap.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
|
pios_initcall.h
|
OP-976: RE-run uncrustify
|
2013-06-05 19:48:56 -07:00 |
|
pios_instrumentation_helper.h
|
OP-1837 Uncrustify
|
2015-04-26 21:08:54 +02:00 |
|
pios_instrumentation.h
|
Added new helper macros to performance counters.
|
2015-04-26 14:33:25 +02:00 |
|
pios_irq.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
|
pios_l3gd20.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
|
pios_led_priv.h
|
Moves pios_led functionality to pios_gpio and makes pios_led a thin layer over pios_gpio. Supports configuring multiple sets of GPIOs.
|
2013-07-28 07:01:08 -07:00 |
|
pios_led.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
|
pios_math.h
|
OP-1658 - Implementation of Sensor Module using PiOS Sensors Framework
|
2015-02-03 00:00:05 +01:00 |
|
pios_mem.h
|
OP-1804: Add realloc.
|
2015-04-16 22:52:09 -07:00 |
|
pios_mpu6000_config.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
|
pios_mpu6000.h
|
OP-1658 - MPU6000 & HMC5x83 make driver struct const
|
2015-02-03 00:00:05 +01:00 |
|
pios_mpu9250_config.h
|
REVONANO - Add MPU9250 support
|
2015-05-18 21:29:42 +02:00 |
|
pios_mpu9250.h
|
REVONANO - Minor cleanup of MPU9250 driver
|
2015-05-18 21:29:55 +02:00 |
|
pios_mpxv.h
|
OP-1869 "scale" lower case
|
2015-05-13 21:55:18 +02:00 |
|
pios_ms4525do.h
|
OP-1273 New files for the MS4525DO PixHawk speed sensor: PIOS files and module files
|
2014-03-25 10:37:10 +01:00 |
|
pios_ms5611.h
|
OP-1658 - MS5611 sensor framework model support
|
2015-02-03 00:00:05 +01:00 |
|
pios_notify.h
|
OP-1379 add base types for colour, Initial ext rgb led api definition
|
2014-08-12 09:44:44 +02:00 |
|
pios_oplinkrcvr_priv.h
|
OP-932: Adds an oplink receiver device, which is based on the gcs receiver device, but uses the OPLinkReceiver UAVObject. The OPLinkReceiver packets are generated on the OPLink modem.
|
2013-06-26 17:56:20 -07:00 |
|
pios_overo_priv.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
|
pios_overo.h
|
Rename flight/PiOS->flight/pios
|
2013-04-25 13:13:41 +03:00 |
|
pios_posix.h
|
OP-1696 PathFollower rewrite in C++ and Landing Squashed commit of the following:
|
2015-03-20 21:42:20 +11:00 |
|
pios_ppm_out_priv.h
|
OP-932 Moves the PIOS_PPM_OUT_Set function from pios_ppm_out_priv.h to pios_ppm_out.h
|
2013-06-26 17:55:56 -07:00 |
|
pios_ppm_out.h
|
OP-932 Moves the PIOS_PPM_OUT_Set function from pios_ppm_out_priv.h to pios_ppm_out.h
|
2013-06-26 17:55:56 -07:00 |
|
pios_ppm_priv.h
|
OP-932 Adds a semaphore to PPM input to signal when a new frame has been received. This can be used to process a new frame with as low a latency as possible.
|
2013-06-26 17:56:10 -07:00 |
|
pios_ppm.h
|
Rename flight/PiOS->flight/pios
|
2013-04-25 13:13:41 +03:00 |
|
pios_pwm_priv.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
|
pios_pwm.h
|
OP-1682 - Workaround overflow issue with pwm receiver inputs on shared timers.
|
2015-01-19 21:55:40 +01:00 |
|
pios_rcvr_priv.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
|
pios_rcvr.h
|
OP-1803 Initial commit
|
2015-04-02 19:09:58 +01:00 |
|
pios_rfm22b_com.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
|
pios_rfm22b_priv.h
|
uncrustify
|
2015-02-05 01:42:32 +01:00 |
|
pios_rfm22b.h
|
OP-1522 Remove unused channel set cfg
|
2015-02-02 21:25:38 +01:00 |
|
pios_rtc_priv.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
|
pios_rtc.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
|
pios_sbus_priv.h
|
OP-1473 Fix EOF handling for R7008SB
|
2014-09-04 18:15:36 +02:00 |
|
pios_sbus.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
|
pios_sdcard.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
|
pios_sensors.h
|
OP-1658 - Fix header
|
2015-02-08 19:02:48 +01:00 |
|
pios_servo_priv.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
|
pios_servo.h
|
OP-1683 - Increase resolution for OneShot125 running timer at 8MHz, setup automatically rates for OneShot
|
2015-01-30 21:22:00 +01:00 |
|
pios_spi_priv.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
|
pios_spi.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
|
pios_srxl_priv.h
|
OP-1837 Uncrustify
|
2015-04-26 21:08:54 +02:00 |
|
pios_srxl.h
|
OP-1837 This change adds support for the Multiplex SRXL v1 and v2 protocols.
|
2015-04-26 15:04:52 +02:00 |
|
pios_stdio.h
|
uncrustification!
|
2014-11-08 12:59:16 +01:00 |
|
pios_stm32.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
|
pios_struct_helper.h
|
OP-1456 get rid of cast_struct_to_array because it is error prone!
|
2014-08-24 00:16:34 +02:00 |
|
pios_sys.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
|
pios_task_monitor.h
|
OP-1026 fix review issues
|
2014-03-09 16:08:27 +01:00 |
|
pios_tim_priv.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
|
pios_tim.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
|
pios_trace.h
|
uncrustification!
|
2014-11-08 12:59:16 +01:00 |
|
pios_ubx_ddc.h
|
OP-1477 - Add pios_ubx_ddc driver to handle i2c comms with UBlox GPS
|
2014-09-16 22:40:52 +02:00 |
|
pios_udp_priv.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
|
pios_udp.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
|
pios_usart_priv.h
|
OP-1849 Hooks all in place for CDC line state changes to drive port GPIO for DTR
|
2015-04-26 03:05:47 +01:00 |
|
pios_usart.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
|
pios_usb_board_data_priv.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
|
pios_usb_cdc_priv.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
|
pios_usb_defs.h
|
OP-1810 FOC
|
2015-05-13 17:19:51 +10:00 |
|
pios_usb_desc_hid_cdc_priv.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
|
pios_usb_desc_hid_only_priv.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
|
pios_usb_hid_priv.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
|
pios_usb_hid.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
|
pios_usb_priv.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
|
pios_usb_util.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
|
pios_usb.h
|
OP-980 Fix usb reconnection issue for Revolution target.
|
2013-06-05 00:04:26 +02:00 |
|
pios_usbhook.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
|
pios_video.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
|
pios_wavplay.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
|
pios_wdg.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
|
pios_ws2811_cfg.h
|
OP-1440 - Change timing slightly to support also WS2812B
|
2014-09-06 12:12:11 +02:00 |
|
pios_ws2811.h
|
OP-1379 - Split pios_ws2811.h in config and public api header
|
2014-08-12 22:19:30 +02:00 |
|
stm32f0xx_conf.h
|
OP-1275 uncrustification
|
2014-09-16 00:42:50 +02:00 |
|
stm32f2xx_conf.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
|
stm32f4xx_conf.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
|
stm32f10x_conf.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
