stac b084fc4be5 alarms: Add alarm for AHRS Communications ... The AHRSComms alarm will be raised whenever the OP board is not able to communicate with the AHRS board. The navigation software on the OP board could use this alarm to trigger its best attempt at an emergency landing. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1002 ebee16cc-31ac-478f-84a7-5cbb03baadba		2010-07-04 02:21:11 +00:00
..
inc	alarms: Add alarm for AHRS Communications	2010-07-04 02:21:11 +00:00
actuatorcommand.c	Flight/UAVObjects Modify update rate and acked flag of periodic objects, added new gpsobject fields	2010-05-30 01:56:43 +00:00
actuatordesired.c	Flight/UAVObjects Modify update rate and acked flag of periodic objects, added new gpsobject fields	2010-05-30 01:56:43 +00:00
actuatorsettings.c	OP-48 Flight/UAVObjects Add access mode field in the metadata. This field can be used to disable local UAVObject updates in the flight or GCS software. It is transparent to any modules and plug-ins, the access control is done by the UAVObjectManager. This functionality is needed for the HITL simulation since certain objects that are normally updated by the flight software (e.g. AttitudeActual, Airspeed etc) will now need to be updated by the GCS. The modules reading those objects do not need to know if the object is updated by the GCS or by the flight software, when HITL is enabled it is transparent to the modules.	2010-05-20 00:58:40 +00:00
altitudeactual.c	Flight/UAVObjects Modify update rate and acked flag of periodic objects, added new gpsobject fields	2010-05-30 01:56:43 +00:00
attitudeactual.c	Flight/Attitude Minor change in field names and task priority	2010-05-25 00:49:46 +00:00
attitudedesired.c	Flight/UAVObjects Modify update rate and acked flag of periodic objects, added new gpsobject fields	2010-05-30 01:56:43 +00:00
attitudesettings.c	Add AHRS attitude module and driver skeletons	2010-05-24 16:33:36 +00:00
attitudesettings.py	Add AHRS attitude module and driver skeletons	2010-05-24 16:33:36 +00:00
eventdispatcher.c	Flight/Telemetry Avoid bunching of periodic updates by spreading them.	2010-06-11 02:24:26 +00:00
exampleobject1.c	Flight/UAVObjects Modify update rate and acked flag of periodic objects, added new gpsobject fields	2010-05-30 01:56:43 +00:00
exampleobject2.c	Flight/UAVObjects Modify update rate and acked flag of periodic objects, added new gpsobject fields	2010-05-30 01:56:43 +00:00
examplesettings.c	OP-48 Flight/UAVObjects Add access mode field in the metadata. This field can be used to disable local UAVObject updates in the flight or GCS software. It is transparent to any modules and plug-ins, the access control is done by the UAVObjectManager. This functionality is needed for the HITL simulation since certain objects that are normally updated by the flight software (e.g. AttitudeActual, Airspeed etc) will now need to be updated by the GCS. The modules reading those objects do not need to know if the object is updated by the GCS or by the flight software, when HITL is enabled it is transparent to the modules.	2010-05-20 00:58:40 +00:00
flightbatterystate.c	new object: FlightBatteryState	2010-06-13 17:21:31 +00:00
flighttelemetrystats.c	OP-48 Flight/UAVObjects Add access mode field in the metadata. This field can be used to disable local UAVObject updates in the flight or GCS software. It is transparent to any modules and plug-ins, the access control is done by the UAVObjectManager. This functionality is needed for the HITL simulation since certain objects that are normally updated by the flight software (e.g. AttitudeActual, Airspeed etc) will now need to be updated by the GCS. The modules reading those objects do not need to know if the object is updated by the GCS or by the flight software, when HITL is enabled it is transparent to the modules.	2010-05-20 00:58:40 +00:00
gcstelemetrystats.c	OP-48 Flight/UAVObjects Add access mode field in the metadata. This field can be used to disable local UAVObject updates in the flight or GCS software. It is transparent to any modules and plug-ins, the access control is done by the UAVObjectManager. This functionality is needed for the HITL simulation since certain objects that are normally updated by the flight software (e.g. AttitudeActual, Airspeed etc) will now need to be updated by the GCS. The modules reading those objects do not need to know if the object is updated by the GCS or by the flight software, when HITL is enabled it is transparent to the modules.	2010-05-20 00:58:40 +00:00
manualcontrolcommand.c	Flight/UAVObjects Modify update rate and acked flag of periodic objects, added new gpsobject fields	2010-05-30 01:56:43 +00:00
manualcontrolsettings.c	OP-48 Flight/UAVObjects Add access mode field in the metadata. This field can be used to disable local UAVObject updates in the flight or GCS software. It is transparent to any modules and plug-ins, the access control is done by the UAVObjectManager. This functionality is needed for the HITL simulation since certain objects that are normally updated by the flight software (e.g. AttitudeActual, Airspeed etc) will now need to be updated by the GCS. The modules reading those objects do not need to know if the object is updated by the GCS or by the flight software, when HITL is enabled it is transparent to the modules.	2010-05-20 00:58:40 +00:00
objectpersistence.c	OP-48 Flight/UAVObjects Add access mode field in the metadata. This field can be used to disable local UAVObject updates in the flight or GCS software. It is transparent to any modules and plug-ins, the access control is done by the UAVObjectManager. This functionality is needed for the HITL simulation since certain objects that are normally updated by the flight software (e.g. AttitudeActual, Airspeed etc) will now need to be updated by the GCS. The modules reading those objects do not need to know if the object is updated by the GCS or by the flight software, when HITL is enabled it is transparent to the modules.	2010-05-20 00:58:40 +00:00
positionactual.c	Flight/GPS Renamed GPSObject to PositionActual and implemented field for GPS status (NoGPS, NoFix, Fix2D and Fix3D)	2010-06-10 01:28:06 +00:00
stabilizationsettings.c	OP-26 Flight/Stabilization First release of stabilization module. Tested using FlightGear, default tuning is for the HITL simulation. Works fairly well but a number of improvements can be made to aid tuning. The ManualControl settings must be first set as you would normally do for HITL simulation, flight mode is changed using the mode channel.	2010-06-25 02:28:16 +00:00
systemalarms.c	OP-48 Flight/UAVObjects Add access mode field in the metadata. This field can be used to disable local UAVObject updates in the flight or GCS software. It is transparent to any modules and plug-ins, the access control is done by the UAVObjectManager. This functionality is needed for the HITL simulation since certain objects that are normally updated by the flight software (e.g. AttitudeActual, Airspeed etc) will now need to be updated by the GCS. The modules reading those objects do not need to know if the object is updated by the GCS or by the flight software, when HITL is enabled it is transparent to the modules.	2010-05-20 00:58:40 +00:00
systemsettings.c	OP-48 Flight/UAVObjects Add access mode field in the metadata. This field can be used to disable local UAVObject updates in the flight or GCS software. It is transparent to any modules and plug-ins, the access control is done by the UAVObjectManager. This functionality is needed for the HITL simulation since certain objects that are normally updated by the flight software (e.g. AttitudeActual, Airspeed etc) will now need to be updated by the GCS. The modules reading those objects do not need to know if the object is updated by the GCS or by the flight software, when HITL is enabled it is transparent to the modules.	2010-05-20 00:58:40 +00:00
systemstats.c	Flight/UAVObjects Modify update rate and acked flag of periodic objects, added new gpsobject fields	2010-05-30 01:56:43 +00:00
telemetrysettings.c	OP-48 Flight/UAVObjects Add access mode field in the metadata. This field can be used to disable local UAVObject updates in the flight or GCS software. It is transparent to any modules and plug-ins, the access control is done by the UAVObjectManager. This functionality is needed for the HITL simulation since certain objects that are normally updated by the flight software (e.g. AttitudeActual, Airspeed etc) will now need to be updated by the GCS. The modules reading those objects do not need to know if the object is updated by the GCS or by the flight software, when HITL is enabled it is transparent to the modules.	2010-05-20 00:58:40 +00:00
uavobjectmanager.c	OP-48 Flight/UAVObjects Add access mode field in the metadata. This field can be used to disable local UAVObject updates in the flight or GCS software. It is transparent to any modules and plug-ins, the access control is done by the UAVObjectManager. This functionality is needed for the HITL simulation since certain objects that are normally updated by the flight software (e.g. AttitudeActual, Airspeed etc) will now need to be updated by the GCS. The modules reading those objects do not need to know if the object is updated by the GCS or by the flight software, when HITL is enabled it is transparent to the modules.	2010-05-20 00:58:40 +00:00
uavobjectsinit.c	Add flightbatterystate to the GCS, ran uavobjgenerator on all XML files. .cpp and .h included for GCS now, uncommented out these files from the uavobjects.pro.	2010-06-17 10:06:51 +00:00
uavobjectsinittemplate.c	Updates on UAVObjects required by the object generator	2010-03-27 03:19:56 +00:00
uavobjecttemplate.c	OP-48 Flight/UAVObjects Add access mode field in the metadata. This field can be used to disable local UAVObject updates in the flight or GCS software. It is transparent to any modules and plug-ins, the access control is done by the UAVObjectManager. This functionality is needed for the HITL simulation since certain objects that are normally updated by the flight software (e.g. AttitudeActual, Airspeed etc) will now need to be updated by the GCS. The modules reading those objects do not need to know if the object is updated by the GCS or by the flight software, when HITL is enabled it is transparent to the modules.	2010-05-20 00:58:40 +00:00