peabody124 3afdc7e41c CC-24: Rotate the CC board at any angle relative to "flat and level" with GCS ... config plugin updates. Has not been tested in flight yet although seems sensible so please be careful when using this code. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3166 ebee16cc-31ac-478f-84a7-5cbb03baadba		2011-04-15 06:37:16 +00:00
..
Actuator	OP-322 Implement Audible alarm via PWM - Different tune for GPS and Battery Alarm	2011-03-13 17:02:19 +00:00
AHRSComms	hwinit: Convert SPI drivers to dynamic init	2011-02-12 22:19:50 +00:00
Altitude	OP-303 PIOS/Sonar: preliminary support for HCSR04 ultrasound altimeter module, tested and working :)	2011-01-28 19:21:22 +00:00
Attitude	CC-24: Rotate the CC board at any angle relative to "flat and level" with GCS	2011-04-15 06:37:16 +00:00
Battery	Changes to FlightBatterySettings as discussed in forums	2011-03-19 18:45:40 +00:00
Example	OP-265 Flight reorganization of UAVObjects and Modules up a directory	2011-01-14 01:38:19 +00:00
FirmwareIAP	Fix FirmwareIAP module, as it failed to reset the board if the object was queried before for other purposes.	2011-03-26 12:00:08 +00:00
FlightPlan	FlightPlan/Python: Updated object generator to create a Python file for each UAVObject. It is now possible to access all UAVObjects from the FlightPlan Python scripts.	2011-03-03 02:22:50 +00:00
GPS	OP-364 OP-191: Convert the OPMap setting of HomeLocation to mGau to match the	2011-03-28 10:40:26 +00:00
Guidance	Modules/Guidance: Bugfix in Position-Hold code	2011-03-31 20:08:14 +00:00
ManualControl	Modified manual control input value checking to determine RC connection state - was previously checking only the throttle channel for semi-valid input range, it now checks the Throttle, Roll, Yaw and Pitch channels for full-valid values (manual value is within min and max values).	2011-04-10 14:00:46 +00:00
MK/MKSerial	OP-265 Flight reorganization of UAVObjects and Modules up a directory	2011-01-14 01:38:19 +00:00
Osd/OsdEtStd	Use attitudeActualData.Yaw for course	2011-03-24 10:56:20 +00:00
Stabilization	OP-313 Account for which axis are in rate and none to get the desired	2011-03-02 01:25:38 +00:00
System	OP-349 CC-32: Added a Completed operation that is returned after successful	2011-03-28 19:16:50 +00:00
Telemetry	hwinit: Convert COM and USART to dynamic init	2011-02-12 22:19:43 +00:00