Alessio Morale
3a772e1828
OP-1828 - Add support for optional analog inputs
...
Optional analog inputs are not initialized at ADC module startup.
Calling PIOS_ADC_PinSetup(uint32_t pin) setups them as analog input at a later stage.
2015-04-09 00:25:53 +02:00
abeck70
b61a76eeae
Merge branch 'next' into abeck/OP-1721
2015-02-19 12:19:28 +11:00
abeck70
53482be09c
OP-1721 C++ and ARM tools
...
Enable revo C++ support:
1. Set USE_CXX to enable compliation and linkage of C++ source code
2. Disables rtti and exceptions
3. operator new and delete call pios malloc/free
4. Static constructor invocation supported
5. Additional methods, compile options, and need to have main as a cpp to solve various link issues when using static constructors but to avoid adding unnecessary libs.
6. Upgrade arm tools
2015-02-13 12:56:04 +11:00
Alessio Morale
f3fe45750d
OP-1683 - Remove dead code
2015-02-11 22:33:58 +01:00
Alessio Morale
46521f1c2d
Merge remote-tracking branch 'origin/amorale/OP-1683_syncupdate_oneshot' into next
2015-02-08 17:59:59 +01:00
Alessio Morale
86a1ca2bcf
OP-1683 - Pulse length must be zeroed at each cycle
2015-02-02 19:58:04 +01:00
Alessio Morale
752f3447d2
OP-1683 - Implement an update skip strategy in single pulse mode when pulse period is higher than the update cycle
2015-02-02 02:58:22 +01:00
Alessio Morale
a5f601593d
OP-1683 - Put again in place safe limits on pulse width
2015-01-31 15:04:02 +01:00
Alessio Morale
86571a804d
OP-1683 - Switch to the same schema used by cleanflight.
...
Running in repetitive mode, clearing CCRx after manually triggering update event.
2015-01-30 21:22:14 +01:00
Alessio Morale
632051c0ac
OP-1683 - Increase resolution for OneShot125 running timer at 8MHz, setup automatically rates for OneShot
2015-01-30 21:22:00 +01:00
Alessio Morale
7955f63c98
OP-1683 - Clenaup, trigger update in setfailsafe, Fix standard pwm operation
2015-01-25 21:25:14 +01:00
Alessio Morale
2a10d9d481
OP-1683 - fixes to PIOS_Servo, added code to prevent overflows
2015-01-24 13:35:41 +01:00
Laurent Lalanne
5d4b1df85c
OP-1652 Fix comment
2015-01-24 00:56:31 +01:00
Alessio Morale
1f95332ff4
OP-1683 - Implement servo synchronous update mode for F4
2015-01-23 23:50:51 +01:00
Fredrik Arvidsson
c8c3a46735
Uncrustify
2015-01-09 21:49:03 +01:00
Mathieu Rondonneau
acc124cacb
OP-1625: DSM: more robust detection of resolution
...
This allows switching back and forth between 10 and 11 bit
code which prevents getting locked up in one or the other.
It also avoids a situation that can cause an infinite
recursion.
This changeset is cherry-picked from TauLabs (b7eaf87502085666d9738ae16c66170f187f3981).
Thanks to Taulabs for improving OpenPilot's DSM autodetect feature.
2014-12-30 21:29:06 -08:00
Mathieu Rondonneau
6844f8351d
run uncrustify.
2014-12-04 20:17:29 -08:00
Mathieu Rondonneau
4b00f6039d
OP-1626: Allow binding to happen within satellite binding window.
...
- This is working for satellite 22ms (genuines and clones).
- This change only affect revo.
2014-11-29 19:59:18 -08:00
Alessio Morale
99d73426b8
Uncrustify
2014-11-27 12:05:59 +01:00
Fredrik Larsson
cd94410468
DSM Protocol removed flight firmware
2014-11-22 08:32:00 +11:00
Mathieu Rondonneau
b0cc9ce021
OP-1625: DSM2/DSMX autodetection of channel resolution.
2014-11-20 19:58:34 -08:00
Stefan Karlsson
3285519380
OP-1536 Send only the available bytes, not the entire buffer, to the USB CDC RX callback function
2014-10-10 23:51:04 +02:00
Alessio Morale
e553014596
Merge branch 'amorale/OP-1476_1477_1275_GPSV9_pios_firmware_bootloader' into next
2014-10-03 00:37:55 +02:00
Alessio Morale
9e0596c2c5
Merge remote-tracking branch 'origin/amorale/OP-1379_ext_led_notification_module_new' into next
...
Conflicts:
Makefile
flight/targets/boards/discoveryf4bare/firmware/Makefile
flight/targets/boards/revolution/firmware/Makefile
2014-09-29 21:26:31 +02:00
Alessio Morale
7e789ccc69
OP-1379 - Clear output pin at the end of dma cycle
2014-09-25 00:59:39 +02:00
Alessio Morale
cd7c76aa13
OP-1275 move implementation specific enums out of common pios_i2c_priv.h
2014-09-16 00:42:50 +02:00
Alessio Morale
233dec6d8d
OP-1379 - Various fixes and additions
...
- Support blocks of led for notification (that is a certain number of leds between a min and a max index);
- Fix an issue with bogus colours on fast updates at LED N°0.
- Add NOTIFY_SEQUENCE_NULL to skip handling a specific alarm status;
- Adjust sequences and add Config and Receiver Alarms;
- fix issue with Alarm trigger/repetition;
- Enables Notify module only if a WS281x output is enabled.
- Add some documentation for sequence/alarm definitions (sequences.h)
- Make sequences more coherent. All GPS related info are now shown in green.
- Revert to original blinking rate for onboard led
- add Notify on DiscoveryF4Bare target
2014-09-06 12:11:53 +02:00
Stefan Karlsson
34983a2d28
OP-922 Fix typo in pios_tim.c
2014-08-16 16:58:15 +02:00
Alessio Morale
1067ea59d1
OP-1379 - Split pios_ws2811.h in config and public api header
2014-08-12 22:19:30 +02:00
Alessio Morale
1f74977472
OP-1379 add base types for colour, Initial ext rgb led api definition
2014-08-12 09:44:44 +02:00
Alessio Morale
03d03cfb06
OP-1395 add a vTaskDelay when waiting for dma transfer to complete when using FreeRTOS.
2014-07-08 02:54:17 +02:00
Alessio Morale
6226aec2a7
OP-943 uses pios_mem API for heap allocation
2014-06-11 22:15:40 +02:00
Alessio Morale
50bef2dc12
OP-943 change make scripts to defines automatically PIOS_TARGET_PROVIDES_FAST_HEAP when available
2014-06-11 22:15:40 +02:00
Alessio Morale
d8f08a7916
OP-943 Add Malloc for "FastHeap" (ccsram)
...
- Use a separate mallocs for thread stack and RTOS structures heap
- Add a pios_mem API to be able to use fast ram (CCM) when available
2014-06-11 22:15:30 +02:00
Alessio Morale
921abb5131
OP-1274 update freertos files. Architecture specific files are left into their original FreeRTOS folder structure
2014-05-18 22:53:23 +02:00
Alessio Morale
58bba31c72
Merge remote-tracking branch 'origin/amorale/OP-1312_pios_ws2811_driver' into next
2014-05-15 20:30:43 +02:00
Alessio Morale
8bbb56337b
OP-1312 keep pulse timings low to have more margin to handle bus contentions and irq response time.
2014-05-11 18:57:06 +02:00
Alessio Morale
3897106f4d
OP-1312 remove boilerplate from config using macros.
...
Use four locations for ch1+update dma source to exploit fifo and memory read bursts
2014-05-01 10:33:44 +02:00
Alessio Morale
4cece04166
OP-1312 fix documentation, get rid of stale comments from previous implementations
2014-04-27 19:12:36 +02:00
Alessio Morale
58178ab193
OP-1312 Fixed led boundary check and framebuffer color order.
2014-04-27 19:11:28 +02:00
Alessio Morale
c281420e25
OP-1307 Most(all?) F4Discovery has an "A" revision of STM32f4.
...
Disable prefetch to overcome the "Section 2.1.1: ART Accelerator prefetch queue instruction is not
supported" issue (DM00037591.pdf)
2014-04-26 22:14:47 +02:00
Alessio Morale
a0b857337f
OP-1312 Add support for Revolution (right now always active on pin3). Configurability not yet added
2014-04-26 18:40:59 +02:00
Alessio Morale
db9435b5ed
OP-1312 add a switch to include/exclude the driver
2014-04-26 17:28:49 +02:00
Alessio Morale
46f70a74c8
OP-1312 Initial version running on DiscoveryF4
2014-04-26 16:57:16 +02:00
Alessio Morale
0aa9ef4b57
OP-1307 Bare f4 discovery platform with no sensor, for development pourpose
2014-04-22 23:46:27 +02:00
Alessio Morale
f01cf66095
Merge remote-tracking branch 'origin/andrecillo/OP-1273_OP-1282_OP-1283_Diverse_Airspeedsensor_improvements' into next
...
Conflicts:
ground/openpilotgcs/src/plugins/systemhealth/systemhealthgadgetwidget.cpp
2014-04-15 21:52:34 +02:00
Philippe Renon
3b7b06aad0
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into next
2014-04-09 09:11:54 +02:00
Andres
9b8be63a4f
OP-1273 OP-1282 OP-1283 added delay to I2C Transfer function for both stm32f40x and stm32f10x
2014-04-02 14:18:42 +02:00
Alessio Morale
6540c69698
Merge remote-tracking branch 'origin/andrecillo/OP-1273_PixHawk_airspeed_sensor_MS4525DO' into next
2014-04-01 22:05:12 +02:00
Andres
830f13596e
OP-1273 OP-1282 OP-1283 uncrustify
2014-03-31 22:17:58 +02:00
