Stacey Sheldon
e2ab662b5d
sysclk: pass in correct definition for HSE_VALUE
...
The code in RCC_GetClocksFreq() uses HSE_VALUE to determine
the tick rate of the SYSCLK. This in turn is used by the
code in PIOS_DELAY_* to compute delays.
ST Library defaults this to 25MHz for the F4. Our board
actually has an 8MHz oscillator so delays were way off.
Mostly affects the bootloaders since most FW code uses RTOS
delays rather than busy-waiting using PIOS_DELAY_*.
2012-03-07 19:52:54 -05:00
Stacey Sheldon
fdf54ab86c
hid: fix response to HID descriptor
...
HID driver was incorrectly giving back the HID interface
descriptor when asked for the HID descriptor. This should
let OP boards interact better with generic HID layer drivers
and also gives us nicer output in lsusb once the HID descriptor
is read.
2012-03-07 19:52:54 -05:00
Brian Webb
444150269a
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into PipXtreme
2012-03-05 18:22:08 -07:00
Sambas
91a9e45888
Updates, first UAVtalk client test
2012-03-05 19:53:52 +02:00
James Cotton
61d59828dc
Disable the new features if not revolution and set an error flag. Fixes
...
compilation errors.
2012-03-05 00:24:11 -06:00
Alessio Morale
637af911ef
Merge remote-tracking branch 'origin/james/revolution' into amorale/revolution
2012-03-04 12:31:13 +01:00
James Cotton
7961aba83c
Clean up a few more compiler warnings
...
Conflicts:
flight/PiOS/Common/pios_ms5611.c
2012-03-03 13:32:56 -06:00
James Cotton
91a226fc12
Sometimes the mag stops updating so kickstart it
2012-03-03 13:31:46 -06:00
James Cotton
bc8b72623e
Get rid of some unused variables
2012-03-03 11:54:09 -06:00
James Cotton
b3f620af7c
Merge remote-tracking branch 'revo/stac/openocd' into revolution
2012-03-03 11:52:09 -06:00
James Cotton
f20e5da9ed
Merge branch 'next' into revolution
...
Conflicts:
ground/openpilotgcs/src/plugins/config/config.pro
ground/openpilotgcs/src/plugins/config/configrevowidget.h
ground/openpilotgcs/src/plugins/scope/scopegadgetwidget.cpp
2012-03-03 11:41:41 -06:00
Stacey Sheldon
0684a42fac
build: use board-specific JTAG interface for openocd
...
Removes hard-coding of JTAG interface config in the
<board>_program make macros.
This allows the use of STLINKv2 for F4 boards while
continuing to use the FOSS JTAG revB on F1 boards.
2012-03-03 08:43:01 -05:00
Stacey Sheldon
d78c5d2a9a
openocd: reenable flash commands on f4 boards
2012-03-03 08:43:01 -05:00
Stacey Sheldon
c0c38609ec
openocd: move to newer openocd (dec6b913)
...
This update fixes flash writing on F4 chips
2012-03-03 08:43:01 -05:00
Alessio Morale
226cd09a13
Merge branch 'james/revolution' into amorale/revolution
2012-03-02 21:24:56 +01:00
James Cotton
e3df261213
Merge branch 'stac/revo-usb' into revolution
...
Conflicts:
flight/Revolution/System/pios_board.c
2012-03-02 13:00:13 -06:00
James Cotton
72a93dbae5
Fix from PT for OSX/Windows F4 USB HID to send the full report size even if not
...
all used.
2012-03-02 11:11:36 -06:00
Alessio Morale
e8880d7271
Removed duplicate InitClock for tim_4
2012-03-02 00:55:50 +01:00
Alessio Morale
691e8760bc
Updated OpenPilotOSX.xcodeproj to include Flight as a reference to the actual folder
2012-02-29 23:13:02 +01:00
Brian Webb
a0bdc58e5b
Added framework for rfm22b com device.
2012-02-28 21:30:06 -07:00
Sambas
8e31f84058
V1 beta
2012-02-28 20:32:44 +02:00
Brian Webb
992aa3bec6
Updated PipX branch to use CDC device with a VCP (not working yet).
2012-02-25 09:07:37 -07:00
Brian Webb
e2cb750dc6
First cut on RadioComBridge module, which is intended to pass data from either a USART or a USB port to the PipX radio link.
2012-02-25 07:37:05 -07:00
Brian Webb
01f314724b
Updates to USB configuration on the PipXtreme.
2012-02-24 15:54:26 -07:00
Brian Webb
483a96c31d
Some more cleanup to PipXtreme codebase.
2012-02-24 07:49:41 -07:00
Brian Webb
b69b285f58
Fixed PipXtreme bootloader.
2012-02-23 20:40:24 -07:00
Brian Webb
182f285e60
Added missing startup file for PipXtreme.
2012-02-23 20:06:34 -07:00
Brian Webb
cf34baec69
Some cleanup on PipXtreme codebase.
2012-02-23 19:58:23 -07:00
Oleg Semyonov
2271b95816
Merge remote branch 'origin/next' into os/features/stick-deadband-next
...
Conflicts:
ground/openpilotgcs/src/plugins/config/configinputwidget.cpp
ground/openpilotgcs/src/plugins/config/configtaskwidget.cpp
ground/openpilotgcs/src/plugins/config/configtaskwidget.h
2012-02-23 08:32:27 +02:00
Oleg Semyonov
e62cc8914c
Merge remote branch 'origin/next' into os/features/pid-tuning-from-transmitter-next
...
Conflicts:
flight/CopterControl/Makefile
ground/openpilotgcs/src/plugins/config/config.pro
ground/openpilotgcs/src/plugins/config/configtaskwidget.cpp
ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
shared/uavobjectdefinition/hwsettings.xml
2012-02-22 23:03:17 +02:00
Brian Webb
f0dfba6fc0
Re-baslined the PipX codebase using the experimental Transmitter codebase.
2012-02-21 20:29:06 -07:00
Oleg Semyonov
403e9cd220
TxPID module: add ILimit values to the list of settings
2012-02-21 19:57:10 +02:00
James Cotton
7b548eaa54
Fix bug in the integral for altitude hold where it was accumulating wrong variable.
2012-02-21 00:40:55 -06:00
Brian Webb
43f6458f86
Reduced the sizeof the UAVObject metadata by:
...
1) Combining all binary or mode values into a single byte
2) Adding accessor functions to read/write the flag bits
3) Reduced the size of the time values from 32 bits to 16 bits
2012-02-20 18:45:18 -07:00
James Cotton
900780e10c
Add bias estimation to the altitude fusion algorithm. Necessary to increase
...
the gains on acceleration and velocity feedback terms (they are a problem when
biased).
2012-02-19 11:38:09 -06:00
James Cotton
47fac7e31c
Move the throttle setting code for alt hold into the fast accel loop.
2012-02-18 18:16:15 -06:00
Sambas
ebd2ae7e59
Bootloader, copy from revo, not functional
2012-02-18 22:35:13 +02:00
Sambas
4dd91d08c2
Settings, home arrow tests & other updates
2012-02-18 12:38:50 +02:00
Oleg Semyonov
c721d001c0
Subtract deadband offset from then input to still have fine control
2012-02-18 10:21:51 +02:00
James Cotton
7d4582e5f0
Update the altitude KF to use the updated measurements appropriately and check
...
in the relevant matlab code to check it and genererate it. Produces quite
smooth traces.
2012-02-16 05:33:47 -06:00
Sambas
8f45114b1f
Fixes & cleanup
2012-02-15 21:14:02 +02:00
Sambas
0bc08a48d8
cleanup 'n' updates
2012-02-14 21:42:09 +02:00
James Cotton
c957172f8f
In the case of swapping in userspace due to the buffer being blocked during
...
ISR, make sure the latency is less than 50 us to avoid framesync errors. Still
seeing a few nonsense packets on Overo side but fairly few. Probably need to
add CRC to whole packet now and call it done.
2012-02-14 11:06:16 -06:00
James Cotton
1930d092eb
In the case where the overo scheduler cannot swap buffers (userspace loading
...
it) then set a flag so as soon as the buffer is loaded then we schedule it.
2012-02-14 11:00:29 -06:00
James Cotton
f04c58b0f4
Make the overo transaction occur based on the rising edge of the NSS line.
...
This fixes most of the frame sync problems. However, it's a bit hacky as
there is currently hardware information inside a module.
2012-02-14 10:37:30 -06:00
James Cotton
d018d93e88
Clean up previous commit a bit and make the sampling rate a variable (and adapt
...
the sampling time accordingly).
2012-02-13 01:49:54 -06:00
James Cotton
3acbfbe96c
Convert the pressure sensor code to most of the calculations as int64 to retain
...
precision.
2012-02-13 01:22:48 -06:00
Sambas
8cc876d02a
OSD branch
2012-02-12 22:29:42 +02:00
James Cotton
4717af1afd
Swap telemetry port and gps ports back
2012-02-12 13:55:52 -06:00
James Cotton
f23f53dc4e
Add settings for the altitude kalman filter settings and init the state when
...
first measurement arrives
2012-02-12 09:07:27 -06:00
