rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-10 18:24:11 +01:00
Code Issues Releases Activity
6,049 Commits 5 Branches 8 Tags 266 MiB
1335ba2636
Commit Graph

3006 Commits

Author SHA1 Message Date
James Cotton
9c1fa2dfc6 Revert "Get mag before gyros so that when gyro chip is acting up we still see mag data." 
This reverts commit d2a3e39bbf.
 2012-06-12 13:10:24 -05:00
James Cotton
01d47d6373 Accidental semicolon led to MPU6000 always failing self test. Another bug 
masked that behavior.  I suck.
 2012-06-11 12:22:24 -05:00
James Cotton
a029fc4656 Merge branch 'next' into revo 
Conflicts:
	Makefile
 2012-06-11 12:05:38 -05:00
James Cotton
93b77becc0 More the system task priority down and increase the timeout for erasing the 
flash so it says completed.  However, it still blocks the system for a long
time.  During an erase the heartbeat will flash at 10 Hz to indicate what's
happening.

This still blocks telemetry even after lowering hte system priority (and there
is a vTaskDelay) which makes me think that the SPI bus being locked is blocking
Sensors or somethign else.  This should not be permited when the system is
armed.

The reason the system locks up during the erase is that the file system
operations occur within the event dispatcher thread.  It is very bad practice
for anything to block this (i.e. callbacks should never take very long).  We
should probably move the object persistence handling into the system thread or
something but that can be a separate issue.
 2012-06-11 12:03:32 -05:00
James Cotton
821a25e419 For now make the F4 PIOS_ADC return an error code if there is no new data in 
the ADC buffer.  This should be handled appropriately by the caller.
 2012-06-11 09:22:04 -05:00
James Cotton
f5845cb037 Fix self test for MPU6000 so it returns negative values per our standard 2012-06-09 11:18:14 -05:00
James Cotton
d2a3e39bbf Get mag before gyros so that when gyro chip is acting up we still see mag data. 
Helpful for board diagnostics.
 2012-06-09 11:06:41 -05:00
James Cotton
ac99176f73 Add a scale to the logo 2012-06-08 14:12:52 -05:00
James Cotton
6ca34d3d0c Make lift model dependent on airspeed. 2012-06-08 13:58:18 -05:00
James Cotton
ac9adb0c94 Improve the airplane modeling a bit to the point navigation now keeps altitude 
and speed correctly
 2012-06-08 13:54:17 -05:00
James Cotton
ccee8e09f4 Cheat. For FW navigation when doing endpoint mode plot path from current 
position to endpoint.
 2012-06-08 11:44:22 -05:00
James Cotton
980111d246 Make RTH mode default to 2 m/s. This needs to be in a UAVO somewhere 
(ManualControlSettings?)
 2012-06-08 11:44:00 -05:00
James Cotton
53c9b4c8a4 Add simulated baro airspeed. PathFollower functionality tested and works. 2012-06-08 11:23:45 -05:00
James Cotton
bcaeda98f7 Fix bug in wind speed usage for simulation 2012-06-08 11:14:15 -05:00
James Cotton
6605d861dd Add cross coupling between roll and heading to make simulator fly like a plane 
:D
 2012-06-08 11:08:11 -05:00
James Cotton
493864bdc4 Add a fixed wing simulator mode 2012-06-08 10:46:40 -05:00
James Cotton
463ad550e2 A few comments in my code and some simplication to the fixedwingfollower to get 
it compiling against my path planner.
 2012-06-08 10:46:40 -05:00
James Cotton
a28aac47b5 Strip down FW navigation to be supported by my simple scheme 2012-06-08 10:46:39 -05:00
James Cotton
4c3ca17e34 Backport the fixed wing path follower 2012-06-08 10:46:39 -05:00
James Cotton
574ab3fcaa Make the VtolPathFollower an optional module 
Note that RTH mode right now checks that throttle control is enabled, but this
should only occur if the system is a VTOL.
 2012-06-08 10:46:38 -05:00
James Cotton
f5b2575c88 Merge branch 'next' into revo 
Conflicts:
	flight/PiOS/Boards/STM32F4xx_Revolution.h
	flight/Revolution/System/inc/pios_config.h
	package/Makefile
 2012-06-07 12:45:06 -05:00
James Cotton
7b8110a457 Merge branch 'MikeL' into next 2012-06-07 11:31:41 -05:00
Corvus Corax
720ae43a5e Modules/GPS: Fixed NMEA parser to still update GPSPosition in case of errors, but with error flagged. 2012-06-07 11:21:00 -05:00
James Cotton
1972470dcb Manualcontrolcommand needs a bit more stack space now 2012-06-07 10:07:52 -05:00
James Cotton
c689bcfb80 Merge remote-tracking branch 'origin/Brian-PipXtreme-V2' into revo 2012-06-07 09:49:18 -05:00
Brian Webb
861bcc46fe Fixed RSSI reporting on PipX. 2012-06-06 21:14:31 -07:00
Brian Webb
e9d0909a68 Further improvements in link reliability on the PipX. 2012-06-06 17:44:56 -07:00
James Cotton
5e01617cbd Merge branch 'next' into MikeL 
Conflicts:
	ground/openpilotgcs/src/plugins/config/airframe.ui
	ground/openpilotgcs/src/plugins/config/configoutputwidget.cpp
	ground/openpilotgcs/src/plugins/config/configoutputwidget.h
	ground/openpilotgcs/src/plugins/config/configvehicletypewidget.cpp
	ground/openpilotgcs/src/plugins/config/configvehicletypewidget.h
 2012-06-06 11:58:06 -05:00
Brian Webb
5876df250d Improved lockups on dropped packets. 2012-06-05 21:10:32 -07:00
Brian Webb
0bc3c5061f Fixed PipX connection status reporting. 2012-06-05 19:34:19 -07:00
Brian Webb
4e68f6543e Added tracking of dropped packets to PipX and turned off visible text on signal strength meters. 2012-06-04 21:18:13 -07:00
Brian Webb
25fe50e9b1 Merge remote-tracking branch 'origin/next' into Brian-PipXtreme-V2 2012-06-04 18:26:05 -07:00
Mike LaBranche
0ba8345c51 Merge branch 'next' into MikeL 
Conflicts:
	flight/Bootloaders/Revolution/inc/pios_config.h
	flight/Modules/OveroSync/inc/overosync.h
	flight/Modules/Sensors/inc/sensors.h
	flight/PiOS/Boards/STM32F4xx_Revolution.h
	flight/PiOS/STM32F4xx/pios_iap.c
	flight/Revolution/System/inc/pios_config.h
	ground/openpilotgcs/src/plugins/config/config.pro
	ground/openpilotgcs/src/plugins/config/configccattitudewidget.cpp
	ground/openpilotgcs/src/plugins/config/configvehicletypewidget.cpp
 2012-06-04 16:59:31 -07:00
Mike LaBranche
bf591ebe45 Merge branch 'next' into MikeL 
Conflicts:
	flight/Bootloaders/Revolution/inc/pios_config.h
	flight/Modules/OveroSync/inc/overosync.h
	flight/Modules/Sensors/inc/sensors.h
	flight/PiOS/Boards/STM32F4xx_Revolution.h
	flight/PiOS/STM32F4xx/pios_iap.c
	flight/Revolution/System/inc/pios_config.h
	ground/openpilotgcs/src/plugins/config/config.pro
	ground/openpilotgcs/src/plugins/config/configccattitudewidget.cpp
	ground/openpilotgcs/src/plugins/config/configvehicletypewidget.cpp
 2012-06-04 15:38:57 -07:00
James Cotton
0b828fbdd0 Merge branch 'next' into revo 
Conflicts:
	Makefile
 2012-06-04 14:12:19 -05:00
James Cotton
ff0a3a156e Merge remote-tracking branch 'origin/os/AeroSimRC' into next 2012-06-04 12:25:59 -05:00
James Cotton
ed2fb5cb09 Merge branch 'next' into revo 2012-06-04 12:23:58 -05:00
James Cotton
46a52fc5ce Apply the virtual flybar stick scaling in stabilization.c because we need to 
know the true stick position to dampen the gyros appropriately.
 2012-06-04 12:22:39 -05:00
James Cotton
bda3f301cb Rename VBar mode to VirtualBar 2012-06-04 12:22:39 -05:00
James Cotton
4c562b88d1 Make the amount to suppress the gyros adjustable instead of binary 2012-06-04 12:22:39 -05:00
James Cotton
59972d5570 Limit the number of degrees the vbar can deflect. This is good for fast flips 
etc.
 2012-06-04 12:22:39 -05:00
James Cotton
42ac4018b8 Woops. Fix really nasty bug in vbar mode I introduced. Also fix small bug in 
scoping of gyro gain that made it not work.
 2012-06-04 12:22:39 -05:00
James Cotton
6719ee8639 Add piro compensation option to the vbar mode 2012-06-04 12:22:39 -05:00
James Cotton
3283b99d4e For hardcode flipping allow full stick to completely override the gyro 
feedback.
 2012-06-04 12:22:39 -05:00
James Cotton
fe978504bc Add friendly settings for the vbar mode including the VbarTau which acts like 
the time constant.
 2012-06-04 12:22:39 -05:00
James Cotton
ff1b1a93cf Implement a virtual flybar in a way inspired by behavior of Align 3G which 
seems apply a leaky integrator to the swash angle.  This is the similar to what
is done by Phubar (http://code.google.com/p/phubar/) as well although we refer
to the gyro term as the proportional and the flybar angle as the integral
 2012-06-04 12:22:38 -05:00
James Cotton
1b55df733d Create virtual flybar setting for stabilization modes 2012-06-04 12:22:38 -05:00
James Cotton
daaa661080 Turned "Battery" into an optional module. It otherwise prevents flying if no voltage sensor is installed. 
Conflicts:

	shared/uavobjectdefinition/hwsettings.xml
 2012-06-04 10:50:45 -05:00
James Cotton
70a6bf539b Fix simulation implementation of pios_rcvr to match channel mappings in real 
firmware
 2012-06-04 10:30:44 -05:00
James Cotton
b11b606ddc Fix RTH mode. Now works in simulation when GCSReceiver goes invalid. 
There is a small issue that when it is in RTH failsafe mode and you regain
signal and your throttle is low you will disarm due to the timeout.  That
means you'd suddenly get it back and plumet ouf of the sky.  If you are
still holding throttle (which most people might do?) you will have control.

The timeout needs to probably start when you regain signal.
 2012-06-04 10:25:43 -05:00
James Cotton
9f93c9cbec Get PIOS_GCSRCVR working on revo 2012-06-04 09:48:05 -05:00
James Cotton
dc7fe1bdd8 Try and get pios_gcsrcvr working on simulation and revo for testing RTH. Had 
to include uavobjectmanager.h manually which was weird
 2012-06-04 09:48:05 -05:00
James Cotton
10aa31a57f When ManualControlSettings.FailsafeBehavior is set to RTH and no valid input is 
detected and the aircraft is armed enter RTH mode.
 2012-06-04 09:48:05 -05:00
James Cotton
21eb48c58c Add a RTH flight mode and remove it from the waypoint actions as that is 
redundant with flying to (0,0,0)
 2012-06-03 22:14:11 -05:00
James Cotton
9707c6152a Merge remote-tracking branch 'origin/Brian-PipXtreme-V2' into revo 2012-06-03 19:13:01 -05:00
James Cotton
71e14a691e Merge branch 'next' into revo 2012-06-03 19:00:51 -05:00
Stacey Sheldon
ec0889ea85 makefile: add additional context to output when building all_* targets 
When building the various all_* targets, it was hard to tell which
board/build-type that each line of output applied to.  Now, the
all_* target types will include something like:
 CC        [fw|cc  ]  flight/PiOS/STM32F10x/pios_gpio.c
which includes the necessary additional context.

This will help with identifying the context for warnings and errors
when building a group of targets.
 2012-06-03 18:25:23 -05:00
James Cotton
e341a37bd1 Need to add a small delay after save for the load to work correctly. Odd. 2012-06-03 17:26:10 -05:00
James Cotton
a3df27ab65 Need to call FLASH_OB_Launch after setting the BOR bits 2012-06-03 16:45:18 -05:00
Brian Webb
36f62be3b9 Fixed packet error detection and improved RSSI reading. 2012-06-03 10:07:08 -07:00
Corvus Corax
be72d24c5f Attitude: Fixed calculation for baro offset adjustment time 2012-06-03 09:52:24 -05:00
Corvus Corax
b06b51f1b2 Revolution/Attitude: Added offset calculation for barometric altitude 2012-06-03 09:52:14 -05:00
James Cotton
96bd5ba574 Merge branch 'navigation_map' into revo 2012-06-03 09:48:28 -05:00
James Cotton
c892a28970 Fix firmware to work with new usage of the action waypoint field 2012-06-03 09:36:21 -05:00
James Cotton
4ad23864c8 Treat the waypoint action as something to do once you hit that location. (e.g. 
PathToNext) and add a Stop value to indicate not to advance to the next
waypoint.  This is essentially a perament loiter to the pathfollower (I think)
but it's really just to have the ability to "delete" waypoints.
 2012-06-02 18:40:53 -05:00
James Cotton
e8cf606f16 Add the chip size to the flashfs configuration (should probably go in the chip 
configuration)
 2012-06-02 11:00:42 -05:00
James Cotton
25f85ee4fe Add an error flag to ObjectPersistence and when saving a setting make it verify 
that the data reads successfully.
 2012-06-02 10:23:27 -05:00
Brian Webb
df8a5f8f27 Changed update period for PPM inputs on the PipX. Fixed LED code. 2012-05-31 18:56:07 -07:00
James Cotton
ed2b9f1f63 Make PIOS_LED init it's GPIO clocks so it doesn't rely on startup code 2012-05-30 10:12:40 -05:00
James Cotton
c76c71cfce No reason to init the board a second time 2012-05-30 09:50:05 -05:00
James Cotton
7c8cc94f5e In the revo bootloader check that the BOR bits are set to 2.7 volt threshold. 
This addresses an issue where a slow power ramp (e.g. some BEC) will stop it
booting.
 2012-05-30 09:43:04 -05:00
Brian Webb
7287e2f725 Merge remote-tracking branch 'origin/next' into Brian-PipXtreme-V2 2012-05-29 18:14:20 -07:00
Oleg Semyonov
b93674cf64 uavtalk: fix object access mode comments to be correct 2012-05-29 11:57:31 +03:00
Brian Webb
9a6fb60dd6 Merge remote-tracking branch 'origin/next' into Brian-PipXtreme-V2 2012-05-28 20:18:59 -07:00
James Cotton
a89b880609 Fix compilation error on CopterControl because it doesn't support some of the 
path functionality.  These configurations that could result in
updatePathDesired or altitudeHoldDesired being called should result in an error
on startup to block arming.
 2012-05-28 20:33:49 -05:00
James Cotton
564c442ac8 Remove some code from Zippe that used a timer to trigger the ADC. We might do 
this again in the future but we need to generalize the configuration.  For now
the ADC is fairly simple requirements on revo for battery monitoring.
 2012-05-28 20:28:48 -05:00
James Cotton
88cf100430 Merge remote-tracking branch 'revo/amorale/revo' into revo 2012-05-28 20:27:51 -05:00
a*morale
d071491265 removed include for positiondesired.h 2012-05-29 00:56:39 +02:00
a*morale
468e8732f5 Fix for FlightBattertData ConsumedEnergy calculation 2012-05-29 00:55:03 +02:00
James Cotton
1934752d50 Merge branch 'revo-next' into revo 2012-05-28 15:23:14 -05:00
Oleg Semyonov
5739dfbfc8 Merge remote-tracking branch 'origin/next' into os/aerosimrc 
Conflicts:
	shared/uavobjectdefinition/gcsreceiver.xml
 2012-05-28 21:46:43 +03:00
Oleg Semyonov
910b465ac6 AeroSimRC: do not update sensor and/or attitude data if read-only flag is set 2012-05-28 19:44:34 +03:00
James Cotton
4360d8adfd Merge branch 'next' into revo-next 2012-05-28 11:25:40 -05:00
James Cotton
8a6073fbaf Merge remote-tracking branch 'revo/revo-next' into testing 
Conflicts:
	Makefile
	flight/PiOS.osx/osx/Libraries/FreeRTOS/Source/portable/GCC/Posix/port.c
	flight/PiOS.osx/osx/Libraries/FreeRTOS/Source/task.c
	flight/PiOS.posix/posix/Libraries/FreeRTOS/Source/portable/GCC/Posix/port_posix.c
	flight/PiOS.posix/posix/Libraries/FreeRTOS/Source/tasks.c
	flight/Revolution/Makefile
	ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
	ground/openpilotgcs/src/plugins/uploader/devicewidget.cpp
	shared/uavobjectdefinition/taskinfo.xml
 2012-05-28 09:13:26 -05:00
Corvus Corax
978ab5b96c Merge remote branch 'origin/stac/etasv3' into revo-next 2012-05-28 12:56:27 +02:00
Oleg Semyonov
f95d29a3b8 TxPID: add GyroTau to the list of parameters (OP-637) 2012-05-28 12:48:55 +03:00
Stacey Sheldon
5c114aedd5 pipx: apply fixes that allow pipx to build with new gcc 2012-05-27 21:38:33 -04:00
Stacey Sheldon
decd92f21d pipx bu: apply recent LED changes so BU image builds again 2012-05-27 21:37:59 -04:00
Stacey Sheldon
c719d5b6cf f4 adc: allow PIOS ADC to be properly excluded from the build 
This was preventing the BL image from building
 2012-05-27 21:36:56 -04:00
Stacey Sheldon
261e65a6f2 revo bu: apply recent LED changes to revo so BU builds again 2012-05-27 21:35:52 -04:00
Stacey Sheldon
8d47dc1fe4 revo usb: apply recent hid+vcp decscriptor changes to revo 2012-05-27 21:35:13 -04:00
Stacey Sheldon
33e7e775c7 Merge remote-tracking branch 'op-public/next' into revo-next 2012-05-27 20:39:58 -04:00
James Cotton
1b53a9c4e6 Merge branch 'revo_battery' into testing 2012-05-26 17:06:27 -05:00
James Cotton
bd8125e41e Catch from Corvus that the path error was being squared. However need to make 
sure to take care of sign by removing one of those multiplcations.
 2012-05-26 15:24:50 -05:00
James Cotton
5a6e02a688 Merge remote-tracking branch 'origin/Brian-PipXtreme-V2' into next 2012-05-25 20:37:23 -05:00
Brian Webb
b824c87056 Merge remote-tracking branch 'origin/next' into Brian-PipXtreme-V2 2012-05-25 06:26:29 -07:00
Brian Webb
701a480f01 Tuning configutation of PipX. 2012-05-24 18:08:29 -07:00
Brian Webb
f48bb90cf6 Updated PipX bootloader USB configuration to match CC. 2012-05-24 18:06:19 -07:00
Brian Webb
a434688b42 Zero out watchdog register on init. 2012-05-24 18:04:42 -07:00
Stacey Sheldon
ac75dd7be1 Revert "bu: remove LED support from bootloader updaters" 
This reverts commit 7f03a77492.
 2012-05-23 00:46:19 -04:00
Stacey Sheldon
400e529703 bu: add back LED feedback 
LED support was dropped from the BU images due to a lack
of proper abstraction for LED definitions between CC and
CC3D HW variants in the CopterControl board family.

Use the new LED abstraction to hide board revision details
from the BU image so it can once again flash some LEDs.
 2012-05-23 00:31:08 -04:00
Stacey Sheldon
56dddee56c cc: use defines for board revisions instead of hard-coded numbers 2012-05-23 00:29:12 -04:00
Stacey Sheldon
d2615cac96 hw_defs: hide board-rev differences in LED definitions 
Every board has at least one LED (HEARTBEAT).  Not all
users of LEDs need to be directly aware of which LED
configuration to choose when there may be more than one
possible configuration.

Hide the details of the differences between LEDs used in the
different HW revs for CC.  This will allow generic code to
run on CC and CC3D without being exposed to the details of
the different pins used for the LEDs.
 2012-05-23 00:22:11 -04:00
Stacey Sheldon
b97aba834a cc3d leds: move pin remapping into led definition 
The LED driver supports GPIO remapping.  No need to
do the remapping outside of the LED definition.
 2012-05-23 00:12:51 -04:00
Stacey Sheldon
dff43d5156 board_info: add guard for multiple includes of .h file 2012-05-22 21:50:53 -04:00
Corvus Corax
64c1ac3bd6 Stabilization: Bugfix: moved queue initialisation to TaskStart where it belongs 2012-05-22 22:19:31 +02:00
Corvus Corax
7f334a9773 SimPosix: make use of compile time uavobjecto initialization function generation 2012-05-22 22:06:26 +02:00
Corvus Corax
31da29a24b Reenabled full UAVObject initialization for SimPosix 2012-05-22 21:22:59 +02:00
Corvus Corax
3e5741abea SimPosix: Remove unneeded modules from Makefile to allow test run 2012-05-22 18:45:23 +02:00
Corvus Corax
9aca773714 SimPosix: Reenabled File IO for UAVObject saving 2012-05-22 18:32:52 +02:00
Corvus Corax
0d23e78762 PiOS.posix: added missing header definition to use FreeRTOS tasks in udp driver if applicable 2012-05-22 18:32:47 +02:00
Corvus Corax
e16a42b672 SimPosix: Fixed Module Initialisation, added missing UAVObject Initialisations (cause segfaults if not initialised) 2012-05-22 18:32:41 +02:00
Corvus Corax
5727d5714e Created new "SimPosix" board and ported PiOS.posix to revolution API and more "standard like" configuration akin to other "boards" 2012-05-22 18:32:27 +02:00
Corvus Corax
414310fcba test add of SimPosix architecture - doesnt work yet 2012-05-22 18:28:42 +02:00
Brian Webb
8b98d48fc4 Merge remote-tracking branch 'origin/next' into Brian-PipXtreme-V2 2012-05-22 06:27:45 -07:00
Stacey Sheldon
3b0508e753 bu: check compatibility btw BL and HW before installing 
CC and CC3D boards share the same FW image.  This is accomplished
by checking the BOARD_REVISION field in the board_info_blob
that is stored in the BL partition in flash as we init the FW.

Make sure that the BU image only writes a BL image that has
the same BOARD_TYPE and BOARD_REVISION fields in the embedded
image as the ones currently in flash on the board.

This ensures that we never write a CC3D BL image onto a CC board
and vice versa.  This check should prevent "bricking" a board.
 2012-05-22 00:33:40 -04:00
Stacey Sheldon
e063bb0490 bl: use new USB "cable connected" API to halt in BL 
BL only cares about the physical cable being connected.
Use the newly provided API that matches this intent.
 2012-05-22 00:24:16 -04:00
Stacey Sheldon
dab400c80d usb: decouple "available" from "cable connected" 
The bootloader needs to understand whether the USB cable
is connected.  The HID and CDC drivers need to know if
the cable is connected _and_ the device has been enumerated
already.  Separate these two concepts in the API.

Combining these was resulting in the BL not properly
detecting that the cable was plugged in, and trying to boot
the firmware image immediately.  This effectively bricked
the board if you ever had an invalid firmware image.

It also happens to be the case that the BU images automatically
invalidate themselves after updating the BL so they don't run
again.  The cable detect bug + this intended behaviour of the
BU image resulted in a bricked board after upgrading the BL.
 2012-05-22 00:21:24 -04:00
Brian Webb
6e359c5933 Added PipX to Windows .inf file and updated ppm port definitions. 2012-05-21 19:22:46 -07:00
Brian Webb
e57543ec29 Updated USB on PipX to latest CDC changes. 2012-05-20 19:34:43 -07:00
Brian Webb
6cb13aa2ba Fixed failed merge with next. 2012-05-20 18:36:08 -07:00
Brian Webb
2f1a9e3e7d Added PPM input to the PipXtreme. Also added configurable GCSReceiver timeout. 2012-05-20 18:30:37 -07:00
Stacey Sheldon
d7d670036b usb: make sure USB device is off limits until it has been init'ed 
USB device was being accessed prior to being initialized.
This resulted in a hard-fault or NMI when using any endpoint
beyond 0 or 1 which are init'ed by the BL.  This broke VCP which
is on endpoint 2 (control) and 3 (data).

This bug was introduced in 5ad37e69 which stopped checking the
transfer_possible variable.
 2012-05-20 13:28:16 -04:00
Stacey Sheldon
7e6a222a8e usb serial: refactor serial number construction 
Use new PIOS_USB_UTIL_AsciiToUtf8() function to compose the
USB serial number rather than repeating that code for each
board.

All boards now append "+FW" or "+BL" to their USB serial numbers
to allow the descriptors to differ between FW and BL images.
 2012-05-19 16:15:47 -04:00
Stacey Sheldon
698ea8e86e usb util: Add common utility functions for USB descriptors 
Make a home for generic functions related to USB.
 2012-05-19 16:14:10 -04:00
Stacey Sheldon
3e0a9bc47e usb: Change supported LANGID in USB descriptor to be English US 
Some versions of Windows will ignore the USB device serial number
if the string is not delivered with LANGID = English US 0x0409.

This is true regardless of the configured locale of the machine.
 2012-05-19 16:12:34 -04:00
Stacey Sheldon
19367730c0 usb: remove null termination on serial number string 
The serial number string descriptor was incorrectly null
terminated.  The standard clearly states that there should
not be a null terminator.

Use new #defines to ensure that our strings are sized
properly.
 2012-05-19 16:06:49 -04:00
Stacey Sheldon
b905607dc7 serial: use defines for serial number lengths 
Use #defined sizes for returned serial number lengths instead
of hard-coded values.
 2012-05-19 16:06:48 -04:00
Stacey Sheldon
ba8d60301c usb: remove run-time selectable device descriptors 
BL images now always use hid-only.

FW images can use hid-only or hid+vcp but this is selected
ONLY at compile time based on whether PIOS_INCLUDE_USB_CDC
is defined.

CC uses HID+VCP by default now.
 2012-05-19 16:06:48 -04:00
Stacey Sheldon
d4b0475f6a usb-descriptors: add +BL or +FW suffix to serial number string 
This makes the BL and FW images distinct devices with unique
serial numbers.

Windows (and maybe Mac) remembers the device descriptors and
the associated drivers based on this serial number.  Providing
unique serial numbers for the BL and FW images allows us to
provide different sets of descriptors for the BL and FW images
without confusing these OSes.

BL version number is now also bumped to reflect the new
serial number generation algorithm.
 2012-05-19 16:06:44 -04:00
Stacey Sheldon
461d4a2ddd hid+vcp: Add Windows INF file for CDC on OpenPilot boards 2012-05-19 16:06:43 -04:00
Stacey Sheldon
48cb20dc81 hid+vcp: change default USB descriptor to HID+VCP 
Now that we have a USB descriptor for HID+VCP that works
on Ubuntu 11.10, MacOS 10.7.3, Win7-SP1-32bit,
WinXP-SP3-32bit, Win7-SP1-64bit.

VCP is known to not work on WinXP without service pack 3.
 2012-05-19 16:06:30 -04:00
zedamota
eb83afdcf1 Working compliant VCP+HID descriptors for Windows. 2012-05-19 15:40:46 -04:00
Brian Webb
6a7179120d Fixed setting of PipX description, and changed gcs receiver object to be update on change on flight side so that it works on the PipX. 2012-05-19 09:25:11 -07:00
Brian Webb
00a83f3984 Reverted change to link_STM32103CB_PIPXTREME_memory.ld 2012-05-18 19:08:44 -07:00
Brian Webb
c25884bcaf Cleanup on the PipX branch. 2012-05-18 17:42:25 -07:00
Brian Webb
68d66d4181 Fixed firmware description in PipX status. 2012-05-17 20:35:17 -07:00
Brian Webb
6fbc3339d5 Fixed processing of UAVTalk packets when in transparent com mode. 2012-05-17 18:37:45 -07:00
Brian Webb
44a1663eb9 Fixed transparent comm on PipX. 2012-05-16 19:02:53 -07:00
Brian Webb
7082eda175 Fixed returning status for currently paired modem. 2012-05-15 20:11:52 -07:00
Brian Webb
93ec7c11a6 Fixed race condition on getting packets. 2012-05-15 19:38:14 -07:00
Corvus Corax
badf509d1d UAVObjects: switched around order of update modes to give each bit semantic meaning - important to allow usage of a bitfield type later 2012-05-15 18:21:27 +02:00
James Cotton
af8d65616e Comment out some unused variables in the PIOS_ADC structure for now since they 
were consuming lots of memory.  Probably should make a simple adc version that
just queries the line when needed since we are only using this data at 500 ms.
However, the accumulator scheme in place is quite good for averaging over time.
 2012-05-15 03:48:32 -05:00
James Cotton
bbb14f5f14 Trying to get F4 PIOS_ADC working. Changed from previous implementation timed 
by another timer to running continuously.  May go back to the previous since no
need to get tons of data.
 2012-05-15 03:19:44 -05:00
James Cotton
39ce3cea17 Clean up the battery module 2012-05-15 03:08:18 -05:00
James Cotton
0a7f5fd5d3 Enable battery code again 2012-05-15 00:38:11 -05:00
Brian Webb
bb491b8a3f Fixed bootloader on PipX. 2012-05-14 06:57:16 -07:00
Brian Webb
31069d8858 Small mod to flash saving. 2012-05-13 20:20:17 -07:00
Brian Webb
563b454693 Fixed compiling of PipX bootloader. 2012-05-13 20:19:04 -07:00
Brian Webb
a3269aaf2f Reverted some file permission changes. 2012-05-13 14:24:57 -07:00
Brian Webb
68d12b1b2f Fixed some bugs with setting PairIDs in GCS. 2012-05-13 14:24:00 -07:00
Brian Webb
dd03b0b159 Added reporting of stats from the remote modem. 2012-05-13 09:34:21 -07:00
Brian Webb
ec67742ff6 Added configuration of COM ports on PipX. 2012-05-12 13:16:36 -07:00
James Cotton
46fc5fa4fb Create a PathPlannerSettings object and move the PathMode setting to there. 
Also add a (temporary) field to allow storing some custom paths to select on
the fly.  Later will be replaced with some code to fetch from the flash chip.
 2012-05-12 13:12:57 -05:00
James Cotton
836e34a483 Change revo sensors to update at 500 Hz and make sure in all cases it waits for 
the relevant queue to provide data.  Also disable the quaternion stabilization
flag.
 2012-05-12 13:12:56 -05:00
James Cotton
65065f2588 Fix the ADC code on the BL for revolution 2012-05-12 13:12:56 -05:00
James Cotton
c660dd17f0 Correct comment in CC settings for MPU6000 and disable I2C support 2012-05-12 13:12:55 -05:00
James Cotton
848f1b0e29 For some reason the gyro needs 300 ms after reset in order to work after the 
bootloader jumps to code.  Nothing in datasheet to imply what.
 2012-05-12 13:00:51 -05:00
James Cotton
2ca3cde83f Improve EKF initialization. For some reason we must read an extra mag sample 
when power up value of attitude algorithm is EKF.  I don't understand why the
first mag value is bad.
 2012-05-12 13:00:51 -05:00
James Cotton
98655aacc8 Fix initialization of the complimentary filter where it didn't get the right 
initial dT
 2012-05-12 13:00:50 -05:00
zedamota
817ce9327f flight - fix pipxtreme bootloader compile 2012-05-12 12:57:15 +01:00
Brian Webb
1f5dbcf57c Mostly complete PipX configuration GUI. 2012-05-11 17:51:18 -07:00
James Cotton
406b5a00f5 Make OSX simulator more efficient 2012-05-08 03:12:35 -05:00
James Cotton
4ec4edd15c When enabling position hold altitude mode take the throttle from before as the 
"hover" throttle
 2012-05-08 03:12:14 -05:00
James Cotton
2857b58f8e Migrate path planner from position desired to path desired 2012-05-08 03:04:44 -05:00
James Cotton
37bb2cfb77 Finish getting rid of PositionDesired in favor of PathDesired and add the 
ability to move the magic waypoint with the transmitter
 2012-05-08 02:42:58 -05:00
James Cotton
a8bdd4a44a Coalescene PositionDesired and PathDesired into PathDesired and add a mode 
field to indicate how it should be interpreted.
 2012-05-08 02:29:58 -05:00
James Cotton
27d1c4be93 Extend list of airframe types for VTOL guidance 2012-05-08 02:29:58 -05:00
James Cotton
c723ae3720 Reduce the CPU usage of OSX simuluator 2012-05-08 02:29:58 -05:00
James Cotton
cbedb5b53b Move Guidance to VtolPathFollower to make room for FWPathFollower 2012-05-08 02:29:50 -05:00
James Cotton
0f2c41ac5d Merge branch 'revolution' into navigation 
Conflicts:
	flight/Modules/ManualControl/manualcontrol.c
	flight/Project/OpenPilotOSX/OpenPilotOSX.xcodeproj/project.pbxproj
 2012-05-07 21:53:10 -05:00
James Cotton
6aa7142f5e When guidance finds an incorrect airframe, delay 100ms to avoid hammering the 
alarms
 2012-05-07 12:55:35 -05:00
Sambas
dedbbec8f0 Make guidance support my Y6, also caused telemetry/usb RXdatarate go thru the roof (Guidance Warning). Almost impossible to change dataframe type to supported one with clean board. 
USB interrupt fix.
Heap warning critical sizes backwards.
 2012-05-07 12:51:07 -05:00
Oleg Semyonov
a3906aa7ea Merge remote-tracking branch 'origin/hhrhhr/AeroSimRC_plugin' into os/aerosimrc 2012-05-07 16:09:35 +03:00
James Cotton
d8c288f223 Disable LEDs on the bootloader update as without knowing the particular 
hardware revision it cannot know which pios_led_cfg_ structure to use.
Possibly this should be abstracted further into board_hw_defs to create
functions like board_init_led.

Also the BU should probably compare the hw_revision of the original and new
bootloader to make sure the user doesn't break their board.
 2012-05-07 01:59:38 -05:00
James Cotton
a40a0b0e31 Small fix to be able to build CC for Revo branch and to include revo in 
package.
 2012-05-07 01:55:52 -05:00
Brian Webb
454144f46c Pairing and saving settings working. 2012-05-06 20:47:21 -07:00
Brian Webb
352471857f Reverted USB configuration and switched all non-blocking COM calls to blocking, which appears to help prevent lockups now that all sends are in a different thread. 2012-05-06 15:07:07 -07:00
Brian Webb
ef4828032b Fixed failed merge with next. 2012-05-06 12:38:13 -07:00
Brian Webb
3cf4fe6512 Reverted some USB changes. 2012-05-05 10:10:40 -07:00
Brian Webb
480371a43e Resolving merge with origin/next 2012-05-05 09:53:54 -07:00
Brian Webb
e83fec0463 Merged latest origin/next. 2012-05-05 09:40:44 -07:00
James Cotton
6c0dc80978 Shuffle more stack sizes around 2012-05-05 11:33:47 -05:00
Werner Backes
22df8310c4 Fixed typo in comment 2012-05-05 11:10:53 -05:00
Werner Backes
f52f5b3d83 Don't process RMC sentences that are flaged as 'void' 2012-05-05 11:10:45 -05:00
Werner Backes
6b463e5c9e Check GGA NMEA sentence for no/invalid fix flag 2012-05-05 11:10:38 -05:00
Werner Backes
217860c187 Check for empty fields during lat/lon conversion (invalid GPS fix) 2012-05-05 11:10:32 -05:00
James Cotton
513c36f19a Update the F4 ADC to compile again. Still not fully compliant with API but 
then again API is not great and unused currently so no rush.
 2012-05-04 21:37:46 -05:00
James Cotton
3ef01569b8 Merge remote-tracking branch 'origin/kenz/PT_UI_fixes' into next 
Conflicts:
	flight/OpenPilot/System/openpilot.c
	shared/uavobjectdefinition/positionactual.xml
	shared/uavobjectdefinition/positiondesired.xml
	shared/uavobjectdefinition/velocityactual.xml
	shared/uavobjectdefinition/velocitydesired.xml
 2012-05-04 13:21:23 -05:00
James Cotton
a9b8e74b0d Disable LEDs on the bootloader update as without knowing the particular 
hardware revision it cannot know which pios_led_cfg_ structure to use.
Possibly this should be abstracted further into board_hw_defs to create
functions like board_init_led.

Also the BU should probably compare the hw_revision of the original and new
bootloader to make sure the user doesn't break their board.
 2012-05-04 08:53:14 -05:00
James Cotton
d93bf5d2a2 Clean up the XCode project 2012-05-03 22:20:00 -05:00
Brian Webb
44d95003f3 Merge remote-tracking branch 'origin/next' into Brian-PipXtreme-V2 2012-05-03 17:56:08 -07:00
James Cotton
3155324384 Merge branch 'next' into cc3d 
Conflicts:
	Makefile
	ground/openpilotgcs/src/plugins/config/configahrswidget.cpp
	shared/uavobjectdefinition/ahrscalibration.xml
	shared/uavobjectdefinition/ahrssettings.xml
	shared/uavobjectdefinition/attituderaw.xml
 2012-05-03 16:31:49 -05:00
James Cotton
07a5d98020 Merge remote-tracking branch 'origin/Brian-Metadata-Mods' into next 2012-05-03 08:50:24 -05:00
Brian Webb
249ededcfd Added responding to OBJ_REQ and sending ACK/NACK on PipX. 2012-05-02 20:51:29 -07:00
Brian Webb
22f48ce8b0 Exposed the Send ACK/NACK function in UAVTalk. 2012-05-02 20:42:37 -07:00
Brian Webb
30d63b5b12 Merged USB CDC updates. 2012-05-02 06:45:24 -07:00
Brian Webb
8da4b9c745 Merge remote-tracking branch 'origin/stac/pt-win-vcp-fix' into Brian-PipXtreme-V2 2012-05-02 06:42:30 -07:00
Brian Webb
290acf0398 Fixed watchdog timeouts. 2012-05-01 20:48:35 -07:00
Brian Webb
217aad8c37 Now using read and write threads for both radio and com ports on PipX. Also cleaned up UAVTalk message handling. 2012-05-01 19:14:58 -07:00