1
0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-02 10:24:11 +01:00
Commit Graph

326 Commits

Author SHA1 Message Date
James Cotton
1e8811362e On revolution attach the flash chip to the accel bus now. Also extended the
flash chip driver to take in the slave number during initialization so this is
no longer a hardcoded option.
2012-01-20 07:37:47 -06:00
James Cotton
1b5e776dc5 Hardcoded scale for now since it isn't picking up from the cfg structure. 2012-01-17 19:53:20 -06:00
James Cotton
ebbe1bd497 Some beginning work on the l3gd20 driver 2012-01-08 09:07:07 +01:00
James Cotton
cc47520baa Checking ID on ST gyro works 2012-01-04 23:23:42 -06:00
James Cotton
0cc18e7dcf Add files for new L3DG20 sensor 2012-01-04 20:33:54 -06:00
James Cotton
0da6109871 Update the F4 copyright headers to 2012 2012-01-04 19:29:29 -06:00
James Cotton
25dfb5463e Add option to switch to using the MPU6000 accel instead of BMA180. Disabled by
default.
2011-12-29 02:08:13 -06:00
James Cotton
c080080810 Add ability to change the SPI bus runs at 2011-12-29 00:09:53 -06:00
James Cotton
8bbc767a4e Get the pressure sensor working and reading into Revolution 2011-11-27 00:52:09 -06:00
James Cotton
cd65df013e Merge branch 'next' into revolution
Conflicts:
	flight/Project/OpenPilotOSX/OpenPilotOSX.xcodeproj/project.pbxproj
2011-11-26 22:52:32 -06:00
James Cotton
c57acf6459 F4 PiOS: Must use a different remap command on F4 for timer module to command
pin.  Include the remap source in the config structure now.
2011-11-26 03:35:26 -06:00
Oleg Semyonov
6d78b97d92 dsm: update DSM protocol binding details in the comments (no code change) 2011-11-19 17:33:04 +02:00
James Cotton
da75e9fdaf PiOS: Make I2C return an error code for NACK 2011-11-19 00:11:16 -06:00
James Cotton
79730d5afa Try and get the MPU6000 buffer to run down. Staying high for some reason. 2011-11-17 11:23:31 -06:00
James Cotton
d97e5dbc59 Add SPI MPU6000 driver. Unfortunate hack in HMC5883 EXTI handler to call
MPU6000.  Need to generalize EXTI ASAP.
2011-11-17 10:12:10 -06:00
James Cotton
1086df5b21 Correctly configure MPU6050 interrupt. However currently not pushing data to
the buffer as that seems to fail.
2011-11-14 11:11:40 -06:00
James Cotton
684715930a Merge branch 'next' into revolution
Conflicts:
	flight/OpenPilot/Makefile
	flight/Revolution/System/inc/openpilot.h
2011-11-14 10:11:53 -06:00
James Cotton
180d84e373 Update the MPU6050 code a bit more to use the right registers. 2011-11-14 10:09:49 -06:00
James Cotton
96a098bf74 Add code for MPU6050 driver 2011-11-13 19:44:56 -06:00
Oleg Semyonov
f5e82b8242 spektrum: rename Spektrum to DSM (DSM2/DSMJ/DSMX used by Spektrum and JR radios)
No code changes, just file, variable and define names are changed.

First, it better describes the serial protocol used by DSMx satellite
receivers. Second, many people using Spektrum radio, assume Spektrum
protocol. This is the attempt to address those inaccuracies.
2011-11-04 21:40:34 +02:00
James Cotton
0931a518d4 Bring F4 PiOS up to date with some of our timer conventions 2011-11-01 04:39:51 -05:00
James Cotton
9607da9c62 Add some drivers to the device specific library for now until the exti problems
are fixed
2011-11-01 03:19:58 -05:00
Oleg Semyonov
0116e6a007 spektrum: rework DSM2/DSMJ/DSMX driver for explicit DSMX resolution support
- both CC serial ports are now disabled by default (no telemetry);
- serial ports now have DSM2, DSMX (10bit) and DSMX (11bit) options;
- ReceiverGroups now have DSM (MainPort) and DSM (FlexiPort) options.

For DSM2 protocol there is an explicit resolution bit in the stream, so
the DSM2 should be selected. For DSMX there is no such bit, and user
should choose the resolution from the list configuring the spektrum port.
ReceiverGroups have single DSM option which is handled by the same driver.

Downside: this implementation saves received frame first, unrolls by the
end of frame. This should be ok, but may be improved by unrolling channels
on the fly in the rx callback.

Another minor difference is that a ChannelGroup is now bound to port:
DSM (MainPort) or DSM (FlexiPort). This was considered as acceptable
solution in order to not have 6 DSM options for each ChannelGroup and
even more in case of new DSM protocol variations.

Known problem: it is not possible to choose same protocols like
DSM2/DSM2 for two ports. It can be enabled by adding an exception to
common rule, though.

The DSMX throttle channel misbehavior (zero value) is not treated
specially yet. It should trigger the failsafe being out of bounds.
More info and data dumps are required to handle this properly.
2011-10-30 19:29:03 +02:00
James Cotton
0f8ae1e076 Merge branch 'next' into ins
Conflicts:
	flight/Project/OpenPilotOSX/OpenPilotOSX.xcodeproj/project.pbxproj
2011-10-26 13:18:44 -05:00
Oleg Semyonov
a19bbba858 Merge branch 'next' into os/alternative_spektrum_driver 2011-10-25 11:55:05 +03:00
Oleg Semyonov
58d0812309 sbus: better frame syncronization, some cosmetic changes
In the previous version the decoder could in rare cases get synced from
the middle of data stream in case of data byte equal to the S.Bus start
of frame (SOF) byte (wrong data will be rejected but it was not perfect).
Now it waits for the real start of frame and then checks the SOF byte.
2011-10-22 00:44:09 +03:00
Oleg Semyonov
62bca651d5 spektrum: alternative DSMx (DSM2/DSMJ/DSMX) driver
- does not glitch when used in 2-frame mode (DM9, 9503, etc)
- does NOT provides yet DSMX stream decoding - do NOT merge
- uses a bit more time in the interrupt, but frees 16 bytes of RAM.
  This is done to help decoding the weird DSMX stream which does not
  contain explicit resolution/frame/lost frames info and needs special
  processing (to be done yet).
2011-10-21 23:35:17 +03:00
Oleg Semyonov
92b81e3f88 sbus: refactor the code using unified PIOS RCVR driver structure
- allow more than one S.Bus receiver (needs hardware support)
- use dynamic memory allocation (frees around 72 bytes of RAM when unused)
2011-10-20 18:23:23 +03:00
James Cotton
400ba3bd47 Merge branch 'next' into ins 2011-09-12 18:57:11 -05:00
Oleg Semyonov
f5369f9338 Input Configuration: support all 18 S.Bus input channels 2011-09-12 02:06:50 +03:00
James Cotton
3239fdf21b Merge branch 'next' into ins
Conflicts:
	flight/CopterControl/Makefile
	flight/OpenPilot/System/pios_board.c
	flight/Project/OpenPilotOSX/OpenPilotOSX.xcodeproj/project.pbxproj
2011-09-09 08:33:34 -05:00
James Cotton
d7ea1fc306 PiOS I2C: Swap the expected return value of the F2 pios i2c calls 2011-09-08 01:32:27 -05:00
James Cotton
627c931c79 PiOS I2C: Swap the convention of returned values for I2C 2011-09-06 03:27:20 -05:00
James Cotton
82c5f9f0f4 PIOS_RCVR: Document return values better and use enum for them 2011-09-04 12:37:39 -05:00
James Cotton
89e640ae7f Make sure all receiver drivers return correct constants for invalid channels. 2011-09-04 01:24:16 -05:00
James Cotton
697dbf4f5f OP-568 PIOS_RCVR: Standardize the values that are returned from the PIOS_RCVR and make
them symbolic constants.
- A timeout is 0
- A missing driver is 65534
- An invalid channel is 65535

ManualControl: Make it deal with the values explicitly.  A timed out value
should not be treated like a minimum duration signal.  Instead it does not
updated the scaled value but marks the data window as invalid to trigger the
failsafe.
2011-09-03 23:50:56 -05:00
James Cotton
dae11cf877 INS Logging: Enable temperature reading from gyro and accel (may be removed in
future), push it into UAVO and introduced a logging mode for INS that outputs
all sensor data from aux port.
2011-09-03 15:10:47 -05:00
James Cotton
c40e5800ab BMA180: Enable the EEPROM writing on startup so settings take the first time. 2011-09-02 13:28:36 -05:00
Stacey Sheldon
2f86e4dd4f Make PWM/PPM and Servo drivers play nicely together
PWM and PPM can now coexist in the same load and be
selected at boot time via the hwsettings UAVObject.

This is basically a complete restructuring of the
way the drivers interact with the TIM peripheral in
the STM32.

As a side effect, the PWM and PPM drivers are now
ready to support multiple instances of each.

This also provides the first step toward being able
to reassign some of the PWM input pins to be servo
output pins.  Still more work required, but this is
a good start.
2011-08-27 21:39:56 -04:00
James Cotton
dc340596f5 Merge branch 'next' into GCS_ChangesToUI-RuntimeCFG
Conflicts:
	flight/CopterControl/Makefile
	flight/OpenPilot/System/pios_board.c
	flight/OpenPilot/UAVObjects.inc
	flight/PiOS/STM32F10x/pios_spektrum.c
	ground/openpilotgcs/src/plugins/config/config.pro
	ground/openpilotgcs/src/plugins/config/configgadget.qrc
	ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
	shared/uavobjectdefinition/hwsettings.xml
2011-08-27 15:26:05 -05:00
James Cotton
5f7a9b513a Merge branch 'sambas/dsmx_stuff' of ssh://git.openpilot.org/OpenPilot into next
Conflicts:
	shared/uavobjectdefinition/hwsettings.xml
2011-08-24 11:37:30 -05:00
James Cotton
b1c522def3 Merge remote-tracking branch 'origin/next' into ins 2011-08-21 01:34:40 -05:00
James Cotton
38d9df8fcb HMC5883: Clean up the mag driver 2011-08-21 01:29:55 -05:00
James Cotton
e1afc9a19a Merge branch 'next' into ins
Conflicts:
	flight/Libraries/inc/fifo_buffer.h
	flight/PiOS/STM32F10x/link_STM3210E_INS_sections.ld
	flight/Project/OpenPilotOSX/OpenPilotOSX.xcodeproj/project.pbxproj
2011-08-21 00:47:43 -05:00
James Cotton
af69e0a1a8 BMA180 driver; Don't externalize the fifo buffer but handle it in the driver
layer.  General driver cleanup.
2011-08-21 00:40:10 -05:00
James Cotton
8ae53a4f97 PiOS: Cleanup IMU3000 driver a fair bit. 2011-08-21 00:39:20 -05:00
James Cotton
368323fd59 Merge remote-tracking branch 'origin/james/erase_settings' into next 2011-08-20 13:07:01 -05:00
James Cotton
3465eb2f30 PiOS F2 I2C: Add a callback based transfer. This needs merging into the main
transfer function like SPI but I will leave that for now to avoid creating a
lot of changes in the main code.
2011-08-19 13:38:11 -05:00
James Cotton
7444337418 F2 PiOS I2C: Add a poor man semaphore here in case we start calling I2C
transfers from IRQ.  Also catch the double 0x70084 event which was locking up
the FSM with -Os enabled.  I did this in a cheating way (filtering the event
based on state) but it's the cleanest I can see.  Hopefully a DMA version of
I2C will fix this.
2011-08-19 11:39:50 -05:00
James Cotton
c7034ef8a6 IMU3000: Fix a constant that made the sampling rate 1kh instead of 8 internaly.
No downsample that (in IMU3000) by 8 to get gyros at 1khz.  Well about 256 Hz
nyquist and shouldn't cause substantial issues for EKF.
2011-08-18 13:01:51 -05:00