Alessio Morale
b003109eea
OP-1104: Update BL to version 6, raise to 0xA0000 so 640Kbyte program size.
...
+review OPReview
#resolve
2013-11-05 19:07:36 +01:00
Alessio Morale
e91bc28667
OP-1058 Get rid of Unions.
...
They caused stack usage increase with -fstrict-aliasing as stack slots are not reused when dealing with unions.
It has now been added the cast_struct_to_array macro in pios_struct_helper.h to handle such case where it is useful to access those homogeneous structs as arrays
+review OPReview-552
2013-09-01 12:10:55 +02:00
Alessio Morale
11b269f898
Merge remote-tracking branch 'origin/next' into amorale/OP-1058_uavo_named_accessors
2013-08-31 16:03:30 +02:00
Alessio Morale
8351e97faa
OP-1058: fix needed for fw_revoproto code compilation
2013-08-01 01:18:53 +02:00
Brian Webb
e246ecf536
Moves pios_led functionality to pios_gpio and makes pios_led a thin layer over pios_gpio. Supports configuring multiple sets of GPIOs.
2013-07-28 07:01:08 -07:00
Corvus Corax
be583dd8bf
fixes to gps airspeed sensor
2013-07-19 15:30:33 +02:00
Alessio Morale
11bc7804d0
Merge branch 'amorale/OP-994_adc_cleanup' into next
2013-07-16 12:23:25 +00:00
Corvus Corax
27eadc200b
Merge branch 'corvuscorax/lla2nedfilter' into next
...
Conflicts:
flight/modules/StateEstimation/stateestimation.c
2013-07-10 14:38:12 +02:00
Corvus Corax
551780c74b
Merge branch 'corvuscorax/complementary_altitude_filter' into next
...
Conflicts:
flight/targets/boards/revolution/firmware/UAVObjects.inc
2013-07-10 14:27:25 +02:00
Brian Webb
c2df59498b
Merge remote-tracking branch 'origin/master' into next
2013-07-06 07:08:30 -07:00
Brian Webb
0d02df4d02
Uncrustified OPLink code.
2013-07-05 18:49:26 -07:00
Brian Webb
6dbecca7a5
OP-932 Fixes erasing settings on OPLink and blocks OPLinkSettings objects from being transmitted over the radio.
2013-07-05 18:25:52 -07:00
Brian Webb
d0d8a0aadd
OP-932 Adds PWM outputs to OPLinkMini. Both gpio pins on the main and/or flexi port can be configured to output PWM for a total of up to 4 PWM outputs.
2013-07-03 18:58:34 -07:00
Alessio Morale
89cb294218
OP-994 Move pios_architecture,h include in pios,h
...
+review OPReview-506
2013-07-02 19:26:39 +02:00
Corvus Corax
51a4b16af5
New Filter to calculate NED from LLA as part of StateEstimation
2013-06-30 18:49:29 +02:00
Corvus Corax
2a16c0dbd7
removed GPS module ability to calculate NED coordinate (not its job)
2013-06-30 16:31:19 +02:00
Brian Webb
491e5fe685
Adds a failsafe on PPM output on OPLink that kicks in when the link goes down. Also updates all air datarate settings and adds new 64 and 100 kbps modes.
2013-06-29 15:00:38 -07:00
Corvus Corax
7745f93935
changed default coefficients and exposed them to a settings uavobject as they should be
2013-06-29 01:16:02 +02:00
Brian Webb
bab69401b9
OP-932 Allows configuring the Revo as coordinator.
2013-06-27 19:55:01 -07:00
Brian Webb
2aea2342ab
OP-932 Adds a direct PPM channel on each Tx packet when in PPM mode, and adds a PPM only mode that uses a 9600 bps air datarate. Also updates the OPLink configuration tab and moves all OPLink configuration to the OPLink configuration tab on the Revo, and customizes the OPLink configuration tab for the Revo.
2013-06-26 18:01:54 -07:00
Brian Webb
774a74884a
OP-932 Replaces the RFM22B PPM/receiver code with an OPLinkReceiver UAVObject. This object is generated on a coordinator OPLink, and is used by both the OPLink to generate PPM output, and the OPLinkReceiver on the Revo.
2013-06-26 17:57:11 -07:00
Brian Webb
8c370df319
OP-932 A significant re-work of the OPLink and configuration of the OPLink. Auto-configuration is removed, and remote modems are bound the coordinator, rather than the other way around. Timing of the radio link is also significantly changed. The rfm22b code is also simplified so that it only sends packet, and has no notion about what those packets are, so the rfm22b is converteded to simply a com type device.
2013-06-26 17:56:56 -07:00
Brian Webb
08efc8d152
OP-932: Adds an oplink receiver device, which is based on the gcs receiver device, but uses the OPLinkReceiver UAVObject. The OPLinkReceiver packets are generated on the OPLink modem.
2013-06-26 17:56:20 -07:00
Corvus Corax
0c43346292
Merge branch 'corvuscorax/OP-947_stateestimator-module' into next
...
Thanks everyone for helping getting this together, especially Alessio
and DLite :-)
2013-06-25 23:48:12 +02:00
Alessio Morale
0b8d18ae49
OP-994 Move common defines to architecture specific header
...
+review OPReview-506
2013-06-24 18:50:44 +02:00
Oleg Semyonov
7f84307714
OP-997: fix release notes. This change was reverted but not documented
2013-06-22 18:29:40 +02:00
Alessio Morale
840e6aa4f7
OP-994 Move temp calculation to a macro defined in pios_board.h as it is achitecture dependant
...
+review OPReview-506
2013-06-15 18:47:33 +02:00
Corvus Corax
1d17d08cca
Merge branch 'next' into corvuscorax/OP-947_stateestimator-module
2013-06-12 18:32:01 +02:00
Alessio Morale
2c0f7794a9
Merge remote-tracking branch 'origin/amorale/OP-997_revolution_settings_to_ext_flash' into next
2013-06-11 15:39:13 +02:00
Brian Webb
789930db45
Moved PIOS_TASK_MONITOR_Initialize to before EventDispatcherInitialize. The event dispatcher creates a task that registers itself with the task monitor. It is unlikely that the task will start before the task monitor is initialized, but not impossible (at least on the F4 targets, I don't think).
2013-06-09 20:16:40 -07:00
Alessio Morale
e9b3ee52f3
OP-997: add fields to SystemStatsUavo to monitor storage status
2013-06-09 19:20:00 +02:00
Alessio Morale
1cb69e6a0e
OP-997: Revert Revolution settings storage to external flash to prevent freezes during sector erase/garbage collection
2013-06-09 19:17:12 +02:00
Alessio Morale
bdd80a63c9
OP-994: Refactor/Cleanup of cpu temp measurement: fixed declarations for Voltage Scale constants
2013-06-08 13:46:57 +02:00
Alessio Morale
ab1c9c157f
OP-995: Fixes for correct battery monitor readout
2013-06-08 13:40:01 +02:00
Alessio Morale
6671a404ca
OP-994 Refactor/Cleanup of cpu temp measurement
2013-06-08 13:36:18 +02:00
Corvus Corax
6fdf554d4a
Merge branch 'next' into corvuscorax/OP-947_stateestimator-module
...
Conflicts:
flight/modules/Attitude/revolution/attitude.c
ground/openpilotgcs/src/plugins/opmap/opmapgadgetwidget.cpp
shared/uavobjectdefinition/attitudesettings.xml
2013-06-06 19:25:54 +02:00
Corvus Corax
5e306250a5
Enabled simulated sensors in SimPosix for debugging of EKF behaviour including:
...
- SimPosix again stores and reads UAVObjects to disk (was disabled by someone)
- simulated sensors moved to allow automated module initialisation in simposix
- fixed a categorization bug in a uavobject
2013-06-05 19:34:48 +02:00
Brian Webb
50162333d8
Merge remote-tracking branch 'origin/dankers/minor-modem-renames' into next
2013-05-27 09:44:17 -07:00
David Ankers
69ede538c9
Update date bu just an easy ay to start review +review OPReview-485
2013-05-26 17:50:44 +10:00
David Ankers
2f9c9df736
Increase the size of the USB Descriptor array to take extra char
2013-05-26 17:03:48 +10:00
David Ankers
7a9466bbf9
State in the header which board this is for
2013-05-26 16:12:35 +10:00
David Ankers
f7a9f94a36
Missing file header
2013-05-26 16:09:55 +10:00
David Ankers
a5b856d1bc
Change board description name to OPLink Mini
2013-05-26 16:04:55 +10:00
David Ankers
d5eccea78f
Comment and header renames, change PipX to OPLink Mini
2013-05-26 15:48:02 +10:00
Corvus Corax
9b95af2006
refaktored GPS Sensor UAVObjects
2013-05-22 22:36:23 +02:00
Corvus Corax
b56de3b66b
filterchain rework
2013-05-22 21:26:18 +02:00
Brian Webb
ac4847c8ac
OP-932 Moves the configuration of the com ports on the coordinator OPLink to startup.
2013-05-21 19:48:21 -07:00
Corvus Corax
ecc4a529a3
some fixes to filtercf and stateestimation and filterekf - Thanks Werner for help :-)
2013-05-21 20:06:33 +02:00
Corvus Corax
3cb4f59c94
failsafe, fallback to attitude for now until StateEstimation works reliably
2013-05-20 20:49:34 +02:00
Corvus Corax
8a36959d39
OP-945: Filter refaktoring - last fixes to make it compile
2013-05-20 17:04:52 +02:00
