James Cotton
b95a78cde5
Roll back changes on the revo target
2012-08-25 17:33:14 -05:00
James Cotton
982750a58f
Merge remote-tracking branch 'revo/brian/revo_link' into revo-mini
...
Conflicts:
ground/openpilotgcs/src/plugins/plugins.pro
2012-08-25 15:05:47 -05:00
Brian Webb
415b86879c
Added the RFM22B driver to the Revo to support an RFM22B radio on the external SPI port.
2012-08-25 11:45:43 -07:00
a*morale
257b00a400
Fixed a typo on I2C speed for the MS5611
2012-08-25 12:28:25 +02:00
James Cotton
88bb73f508
Fix the PIOS_OVERO dma IRQ configuration
2012-07-20 11:14:27 -05:00
James Cotton
6a3c067c18
Zero out the packet counter when pios_over is initialized.
2012-07-20 10:45:20 -05:00
James Cotton
8fc2d10ea6
Get the pios_overo driver for pios_com compiling
2012-07-20 09:32:22 -05:00
James Cotton
a6ba379af9
PIOS_OVERO driver which handles the communications to the overo and ensures the
...
data stays in frame.
2012-07-17 15:34:54 -05:00
James Cotton
dc7fe1bdd8
Try and get pios_gcsrcvr working on simulation and revo for testing RTH. Had
...
to include uavobjectmanager.h manually which was weird
2012-06-04 09:48:05 -05:00
Stacey Sheldon
261e65a6f2
revo bu: apply recent LED changes to revo so BU builds again
2012-05-27 21:35:52 -04:00
James Cotton
bbbca319d8
Merge commit 'c4df0c0ceff8ba985bb20d815f27910b9e59d992' into revolution
2012-03-11 13:14:06 -05:00
Alessio Morale
c4df0c0cef
Support for port remapping on serial ports
...
Support for receiver configuration (PPM, PWM and DSM)
There are still problems with Flexi port (not sure if related to a problem with my board) and Uart/SBUS that has the input always inverted.
2012-03-11 18:38:49 +01:00
Stacey Sheldon
6038bfcb40
revo servo: swap servo pins 3 and 4 definitions to match schematic
...
Note non-standard pin numbering on JP3 on the schematic.
2012-03-10 15:06:21 -05:00
James Cotton
e3df261213
Merge branch 'stac/revo-usb' into revolution
...
Conflicts:
flight/Revolution/System/pios_board.c
2012-03-02 13:00:13 -06:00
Stacey Sheldon
e2939dae2a
revo usb: Add support for USB to Revo
2012-02-07 02:25:31 -05:00
Stacey Sheldon
b8c16fe7a5
hw defs: move misc defines and non-const data out of board_hw_defs.c
...
The board_hw_defs.c file should only contain static
const declarations that only describe the hardware.
All other non-const variables should be put into one
of the pios_board.c files.
2012-02-07 02:25:31 -05:00
James Cotton
0a71a48c57
Sending all FF finally again
2012-02-02 10:36:09 -06:00
James Cotton
80b839d145
The SPI3 TX DMA channel was wrong
2012-02-02 10:13:09 -06:00
James Cotton
88b9f20cda
Fix nasty bug in the DMA stream configuration
2012-02-02 10:13:09 -06:00
James Cotton
95abb56d5e
Added module to send updates out the SPI port
2012-02-02 09:19:25 -06:00
James Cotton
e434ab94a9
Enable SPI port for revolution to overo communications
2012-02-02 01:42:38 -06:00
Alessio Morale
5449408763
Merge branch 'amorale/timerprescaler' into inoutch8
2012-02-01 00:23:53 +01:00
Alessio Morale
cb2dadd0ea
fix Motor 8 out not working
2012-02-01 00:20:50 +01:00
Alessio Morale
322ced44a1
Solve PWM Input 8 not working
2012-02-01 00:16:48 +01:00
Alessio Morale
820e8ac062
Handle different prescaler values for timers on APB1 and APB2.
...
The PIOS_MASTER_CLOCK has been removed in favor of
PIOS_SYSCLK (the master clock value,168000000 for revolution)
PIOS_PERIPHERAL_APB1_CLOCK and
PIOS_PERIPHERAL_APB2_CLOCK
Look at STM32F4xx_Revolution.h for the list of timer/peripheral and APB them belongs.
2012-01-28 20:04:55 +01:00
James Cotton
e07fca0465
Commit the revolution board_hw_defs.c file
2012-01-26 23:32:36 -06:00
