rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-11-29 07:24:13 +01:00
Code Issues Releases Activity
3,237 Commits 5 Branches 8 Tags 266 MiB
7e99419c8a
Commit Graph

51 Commits

Author SHA1 Message Date
Stacey Sheldon
7e99419c8a build: Add support for %.bin.o generation 
The .bin.o rule places the contents of a raw .bin file
into an .o file wrapped within fixed symbols for start
and end.  This can be used to embed a binary file inside
of an executable.

The symbols for the embedded binary blob are:
 _binary_start
 _binary_end
 _binary_size

NOTE: The way the .bin.o rule is currently written, you
can only embed one binary blob in an executable since the
symbol names will collide if you add multiple blobs.  This
limitation is easily removed later if necessary.
 2011-05-07 18:05:50 -04:00
James Cotton
69d03ca101 OP-439: Simplify further. Abstract most of the OOCD flags into the common 
firmware include and delete all the extra foss-jtag config files.  There is now
a legacy file for the revA board a second for AHRS that changes the port
 2011-04-24 10:19:00 -05:00
Corvus Corax
ee7179bd53 OP-439 unified OpenOCD config for mac os x and Linux, Makefiles adapted accordingly 2011-04-24 12:10:33 +02:00
edouard
3fec8a6d72 OP-339 Update PipXtreme PID too. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3020 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-09 18:07:58 +00:00
pip
f4fef1bfb8 Rewrote PipX's PPM input decoder to do away with supervisor timer/monitor. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3019 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-09 17:36:11 +00:00
edouard
ae32bae5c7 OP-338: Use the new convention on bcdDevice for the PipXtreme. Also use the new PID for the modem. Careful, this breaks the uploader gadget on the GCS for now! 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3011 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-08 23:57:18 +00:00
pip
bfcfb3e88e Fixed problem with board rebooting when changing mode from PPM Rx or PPM Tx to some other mode. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2996 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-07 17:46:39 +00:00
pip
3e67bf19dc PPM generator module now working (the modem can generate a nice precise PPM stream) - not yet done the RF streaming side of PPM though. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2995 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-07 15:00:38 +00:00
pip
b71bc49ce3 Updated USB descriptor to use the BCD values stated on the wiki page http://wiki.openpilot.org/display/Doc/Firmware+USB+descriptors 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2993 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-06 21:08:12 +00:00
pip
88b2d360a3 Various minor changes to do with switch modem mode on the fly but mainly PPM Input decoder (with error/noise detection) is now working 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2992 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-06 18:52:18 +00:00
pip
7317891d39 Slight reorganisation to allow easier continuous data transmission (DATA streaming and PPM streaming) and allow easier total configuration changes on the fly. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2961 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-04 08:34:44 +00:00
pip
eaea8f28cf Starting to add continuous streaming modes (DATA and PPM). 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2951 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-03 16:32:43 +00:00
pip
7bfb58ce73 clean up 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2903 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-27 13:13:10 +00:00
pip
a2e1e3e7d0 Updated some RF module register settings 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2876 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-25 11:28:39 +00:00
pip
62e510a696 Set unused/unconnected pins as outputs. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2875 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-24 17:31:24 +00:00
pip
d3ea16de99 Updated spectrum scanning code. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2859 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-23 09:30:06 +00:00
stac
ee3d890bfc makefile: convert to unix line-endings 
These files were a mix of line endings.  Now
they're all consistent as LF terminators.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2855 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-23 04:18:56 +00:00
stac
6700a74782 makefile: refactor makefiles and clean up output 
This significantly reduces the amount of duplication
across the various firmware makefiles.

The new firmware-defs.mk file should contain only
macros/declarations that will apply to all firmware
makefiles.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2854 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-23 04:18:53 +00:00
pip
60e7665aec A bug fixed that caused carrier frequency to go way off when setting the modem to one of the Tx-carrier/Tx-spectrum test modes (and back). 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2799 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-16 12:32:44 +00:00
pip
9899c270cb Removed unused code 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2796 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-15 13:10:18 +00:00
pip
ac7cfcc358 Added "Ready-To-Send-Time" parameter adjustment 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2795 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-15 12:57:46 +00:00
stac
967bb9bb9c pipx: COM device ids are now 32bit not 8bit 
The COM layer now uses 32bit device ids rather than
8bit.  All code that stores these ids must now use
uint32_t to hold them.

Since these 32bit numbers are really just opaque
pointers, it is (reasonably) safe to assume that
they won't be 0.  The logic around tracking the
*_previous_com_port could probably be cleaned up
to remove that assumption.

Missed this fixup in the recent hwinit changes.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2776 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-13 15:54:26 +00:00
stac
3fda65c5d3 hwinit: Convert SPI drivers to dynamic init 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2772 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-12 22:19:50 +00:00
stac
841b0d3d6d hwinit: Convert COM and USART to dynamic init 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2771 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-12 22:19:43 +00:00
pip
d12868f1a3 A few more #define capitalizations. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2748 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-07 12:30:27 +00:00
pip
b2eb141c10 100mW appears to be working again. A few bug fixes. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2745 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-06 21:21:50 +00:00
pip
6559615ef8 Made quite a few constants/#defines capitals (previously lower case) 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2743 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-06 10:55:08 +00:00
pip
9a5d099a79 Started to write the PPM, spectrum scanner and continuous packet stream modules. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2731 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-05 13:45:16 +00:00
pip
41768be215 Allows modem mode to be set - BUT NOT YET IMPLIMENTED, use NORMAL mode for now. 
Fixed bug in pipx plugin import function - wasn't restoring the AES key.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2726 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-04 23:00:48 +00:00
pip
b50965ba9f Fixed AFC reading 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2719 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-04 10:03:47 +00:00
pip
3bad7982dd Fixed RSSI when no signal received. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2714 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-03 13:12:30 +00:00
pip
ac5155f3d9 Increased RF packet ping speed if the GCS is monitoring the RSSI. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2712 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-03 11:31:34 +00:00
pip
0e3ae58c96 New PipX config protocol packets. YOU NEED TO RECOMPILE THE GCS PLUGIN to use this. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2711 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-03 07:05:32 +00:00
pip
7f8b0d5788 Fixed carrier frequency problems. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2700 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-02 17:53:46 +00:00
pip
40e9a592c8 PipX modem can now be configured from GCS in realtime. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2695 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-02 11:44:23 +00:00
pip
2c3e540637 Code added to allow GCS to configure modem. Not yet finished - modem needs rebooting after uploading new config - for the time being. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2687 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-01 23:40:40 +00:00
pip
57c7633476 Renamed uavtalk module to api mode 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2637 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-31 15:44:39 +00:00
sambas
eb6ebb93d2 Build: last patches for windoes, and output targets 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2586 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-24 20:34:29 +00:00
peabody124
1daabba5c1 Build: Change the lower makefiles to use forward slashes but also create 
directories on
windows

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2585 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-24 20:01:06 +00:00
sambas
ae324ffd6e 3rd for Big Mess, bootloaders and pipxtreme 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2549 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-23 18:51:43 +00:00
pip
ddaa306248 Removed ADC usage - this appears to fix the pipx serial port problem. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2457 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-16 19:32:53 +00:00
pip
aedf731c07 Temporary override settings saved in flash. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2453 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-16 17:40:21 +00:00
peabody124
0259b6d1f1 OP-269 PIOS/ADC: First part of conversion to driver structures 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2444 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-16 02:45:39 +00:00
peabody124
81b0c3fdb6 OP-269 PiOS/ADC: Moved AHRS ADC code to PiOS and made all the projects use it 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2440 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-16 02:45:22 +00:00
pip
06c5e9665a removed pios_board.h 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2405 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-13 19:22:54 +00:00
pip
13e3d37ef4 Fixed Watchdog compile problems 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2404 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-13 19:15:12 +00:00
pip
86fc4d2d1c Recovered and added missing file. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2402 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-13 18:19:15 +00:00
zedamota
691c58a583 OP-268/PipX Bootloader - Changed the size of BL def. 
New naming convention for the linker files:
link_(board_name)_(density)_(bl usage).ld

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2401 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-13 17:34:22 +00:00
pip
df45cb7be8 PipX modem full source code moved into public SVN. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2394 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-13 08:45:18 +00:00
pip
acadc4bc28 Added some files to the PipXtreme folder. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1955 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-13 07:49:05 +00:00