Alessio Morale
43f04a340b
OP-1658 - MPU9250 support for sensor "reset", fix temperature measurement
2015-05-18 21:30:01 +02:00
Alessio Morale
174340d8bf
OP-1658 - Various fixes for MPU9250
2015-05-18 21:30:01 +02:00
Alessio Morale
94d30f7ad2
OP-1658 - Add RevoNano support
2015-05-18 21:30:00 +02:00
Alessio Morale
928f1385ec
OP-1658 - MPU9250 sensor device model implementation
2015-05-18 21:30:00 +02:00
Alessio Morale
5a140957f9
REVONANO - Update uavos list
2015-05-18 21:30:00 +02:00
Stefan Karlsson
2630383669
REVONANO - Fix the I2C Error IRQ Handler name for the pressure adapter
2015-05-18 21:29:59 +02:00
Stefan Karlsson
a3fc54ac0b
REVONANO - Fix Baro initialization bug
...
The I2C SCLK pin (A8) was being changed by code used to support battery voltage sensing on the Revo. This code was run after PIOS_I2C_Init but before PIOS_MS5611_Init, causing a BUSY state on the I2C bus before the Barometer initialization code was run.
2015-05-18 21:29:59 +02:00
Laurent Lalanne
57845a7cf9
REVONANO - Disable WDG - Add PathPlanner and PathFollower modules - Fix Tx/Rx buffers for GPS
2015-05-18 21:29:59 +02:00
Stefan Karlsson
8f94aa5353
REVONANO - Use Nano as the USB connection name
2015-05-18 21:29:59 +02:00
Stefan Karlsson
7252fb4207
REVONANO - Fix Auto Upload
2015-05-18 21:29:58 +02:00
Laurent Lalanne
aff4951d02
REVONANO Remove hardcoded Flexiport with telemetry
2015-05-18 21:29:58 +02:00
Stefan Karlsson
21b485aa3f
REVONANO - Fix timers for PPM
2015-05-18 21:29:58 +02:00
Stefan Karlsson
047ee1fcb0
REVONANO - Remove relaytuning from revonano target
2015-05-18 21:29:58 +02:00
Laurent Lalanne
f82a584eb2
REVONANO mpu9250 driver fix for Mag orientation
2015-05-18 21:29:57 +02:00
Alessio Morale
3651ac61a3
REVONANO - Change sensors rate to 333Hz
2015-05-18 21:29:57 +02:00
Alessio Morale
1d7c1b2fc9
REVONANO - Change target to 411, fix ram and flash extents, raise clock to 96MHz (cannot do 100 because of USB) , cleanup spl
2015-05-18 21:29:57 +02:00
Alessio Morale
674963790e
REVONANO - Enable WDG and raise timeout value (due to eeprom reading and initialization being very slow)
2015-05-18 21:29:57 +02:00
Alessio Morale
e5baa8e847
REVONANO - align to 9k setting uniformation
2015-05-18 21:29:57 +02:00
Alessio Morale
15e7286078
MPU9K - merge 9k and 6k settings into a single uavo
2015-05-18 21:29:56 +02:00
Alessio Morale
951c9c2fad
REVONANO - Disable WDG for debug pourposes
2015-05-18 21:29:56 +02:00
Alessio Morale
3563b1ff0e
REVONANO - Prevent modules to start before init: move most code to pios_initcall.h. System and system-Like modules
2015-05-18 21:29:56 +02:00
Stefan Karlsson
efb6855f6f
REVONANO - Various temp fixes debug code to get nano to read from the flash. Code has been added to make the execution of systemTask wait until initTask has completed.
...
Conflicts:
flight/pios/common/pios_flashfs_objlist.c
2015-05-18 21:29:56 +02:00
Stefan Karlsson
2d3c8b835a
REVONANO - Turn on StateEstimate
2015-05-18 21:29:56 +02:00
Stefan Karlsson
8c8abc3cb5
REVONANO - Increase fast_prescaler for the MPU so that it doesn't consume all CPU
2015-05-18 21:29:56 +02:00
Alessio Morale
96659f5757
REVONANO - some unused var cleanup
2015-05-18 21:29:55 +02:00
Alessio Morale
288c9019d1
uncrustify
2015-05-18 21:29:55 +02:00
Alessio Morale
51094ba95d
REVONANO - Minor cleanup of MPU9250 driver
2015-05-18 21:29:55 +02:00
Alessio Morale
4ec44cea90
REVONANO - Fix BU target
2015-05-18 21:29:55 +02:00
Alessio Morale
210b75fcb9
REVONANO - Fix MPU Prescalers
2015-05-18 21:29:55 +02:00
Alessio Morale
b6eedaf93d
REVONANO - Fix PIOS_SYSCLK Declaration
2015-05-18 21:29:55 +02:00
Alessio Morale
d2dae79c82
REVONANO - update SPL to 1.4.0 that adds support for f411
2015-05-18 21:29:55 +02:00
Alessio Morale
4a7d81ed01
REVONANO - Fix gyro spi config and include MPU9250 support
2015-05-18 21:29:54 +02:00
Mathieu Rondonneau
66b06e4c9a
REVONANO - Add MPU9250 support
2015-05-18 21:29:42 +02:00
Alessio Morale
fb11b312c5
REVONANO - Flash fs fixes
2015-05-18 21:26:40 +02:00
Alessio Morale
632a14023c
REVONANO - exclude ccram stuffs
2015-05-18 18:55:26 +02:00
Alessio Morale
8a02caa33a
REVONANO - Fix eeprom configuration
2015-05-18 18:55:26 +02:00
Alessio Morale
5c13551a1a
REVONANO - Add support for eeprom and objlist fs
2015-05-18 18:55:25 +02:00
Alessio Morale
8b11861c63
REVONANO - Readd old objlist FS to be used with EEPROM
2015-05-18 18:55:25 +02:00
Alessio Morale
1e1195ec05
REVONANO - Add Eeprom support
2015-05-18 18:55:25 +02:00
Alessio Morale
764a15999f
REVONANO - Make FlashFS_Logfs optional, remove old onchip eeprom files
...
Conflicts:
flight/targets/boards/coptercontrol/firmware/Makefile
2015-05-18 18:55:21 +02:00
Alessio Morale
76ad80fdf5
Revert "objlist: remove now unused objlist flash filesystem"
...
Bring them back to the right path
This reverts commit d89a9b1b6cd9372eac1a20cb23fd9de144d125eb.
2015-05-18 18:54:52 +02:00
Alessio Morale
8a54414d70
REVONANO - Fix and cleanup hw configurations, Baro working at this stage
2015-05-18 18:54:52 +02:00
Alessio Morale
805750050c
REVONANO - Support distinct remaps for SDA and SCL
2015-05-18 18:54:52 +02:00
Alessio Morale
375f23ff0c
REVONANO - Make debuglog, FlashFS and other bits optional
2015-05-18 18:54:50 +02:00
Alessio Morale
690e04f4f0
REVONANO - Initial board support
2015-05-18 18:52:09 +02:00
Alessio Morale
6d6be75605
REVONANO - Update SPL to 1.3.0
2015-05-18 18:48:18 +02:00
Alessio Morale
b59408863a
REVONANO - Allows per board linker scripts
2015-05-18 18:48:17 +02:00
Laurent Lalanne
3eef68c017
OP-1893 Deadband scale
2015-05-18 16:45:13 +02:00
Alessio Morale
330b396a73
Merge remote-tracking branch 'origin/amorale/OP-1874_notifications_improvements' into HEAD
2015-05-18 10:05:56 +02:00
abeck70
7d603bc6cb
OP-1847 gpsassist fix
...
Set assisted control state to HOLD when Brake controller transitions to HOLD. This impacts throttle stick behavior as it is different during braking and on brake completion in the hold state.
Also cleanuped and removed unused/old code that triggered HOLD in plans.c
2015-05-16 20:33:03 +10:00
