James Cotton
93b77becc0
More the system task priority down and increase the timeout for erasing the
...
flash so it says completed. However, it still blocks the system for a long
time. During an erase the heartbeat will flash at 10 Hz to indicate what's
happening.
This still blocks telemetry even after lowering hte system priority (and there
is a vTaskDelay) which makes me think that the SPI bus being locked is blocking
Sensors or somethign else. This should not be permited when the system is
armed.
The reason the system locks up during the erase is that the file system
operations occur within the event dispatcher thread. It is very bad practice
for anything to block this (i.e. callbacks should never take very long). We
should probably move the object persistence handling into the system thread or
something but that can be a separate issue.
2012-06-11 12:03:32 -05:00
James Cotton
7b8110a457
Merge branch 'MikeL' into next
2012-06-07 11:31:41 -05:00
Brian Webb
861bcc46fe
Fixed RSSI reporting on PipX.
2012-06-06 21:14:31 -07:00
James Cotton
5e01617cbd
Merge branch 'next' into MikeL
...
Conflicts:
ground/openpilotgcs/src/plugins/config/airframe.ui
ground/openpilotgcs/src/plugins/config/configoutputwidget.cpp
ground/openpilotgcs/src/plugins/config/configoutputwidget.h
ground/openpilotgcs/src/plugins/config/configvehicletypewidget.cpp
ground/openpilotgcs/src/plugins/config/configvehicletypewidget.h
2012-06-06 11:58:06 -05:00
Brian Webb
5876df250d
Improved lockups on dropped packets.
2012-06-05 21:10:32 -07:00
Brian Webb
0bc3c5061f
Fixed PipX connection status reporting.
2012-06-05 19:34:19 -07:00
Brian Webb
4e68f6543e
Added tracking of dropped packets to PipX and turned off visible text on signal strength meters.
2012-06-04 21:18:13 -07:00
Brian Webb
25fe50e9b1
Merge remote-tracking branch 'origin/next' into Brian-PipXtreme-V2
2012-06-04 18:26:05 -07:00
Mike LaBranche
0ba8345c51
Merge branch 'next' into MikeL
...
Conflicts:
flight/Bootloaders/Revolution/inc/pios_config.h
flight/Modules/OveroSync/inc/overosync.h
flight/Modules/Sensors/inc/sensors.h
flight/PiOS/Boards/STM32F4xx_Revolution.h
flight/PiOS/STM32F4xx/pios_iap.c
flight/Revolution/System/inc/pios_config.h
ground/openpilotgcs/src/plugins/config/config.pro
ground/openpilotgcs/src/plugins/config/configccattitudewidget.cpp
ground/openpilotgcs/src/plugins/config/configvehicletypewidget.cpp
2012-06-04 16:59:31 -07:00
Mike LaBranche
bf591ebe45
Merge branch 'next' into MikeL
...
Conflicts:
flight/Bootloaders/Revolution/inc/pios_config.h
flight/Modules/OveroSync/inc/overosync.h
flight/Modules/Sensors/inc/sensors.h
flight/PiOS/Boards/STM32F4xx_Revolution.h
flight/PiOS/STM32F4xx/pios_iap.c
flight/Revolution/System/inc/pios_config.h
ground/openpilotgcs/src/plugins/config/config.pro
ground/openpilotgcs/src/plugins/config/configccattitudewidget.cpp
ground/openpilotgcs/src/plugins/config/configvehicletypewidget.cpp
2012-06-04 15:38:57 -07:00
James Cotton
ff0a3a156e
Merge remote-tracking branch 'origin/os/AeroSimRC' into next
2012-06-04 12:25:59 -05:00
James Cotton
46a52fc5ce
Apply the virtual flybar stick scaling in stabilization.c because we need to
...
know the true stick position to dampen the gyros appropriately.
2012-06-04 12:22:39 -05:00
James Cotton
bda3f301cb
Rename VBar mode to VirtualBar
2012-06-04 12:22:39 -05:00
James Cotton
4c562b88d1
Make the amount to suppress the gyros adjustable instead of binary
2012-06-04 12:22:39 -05:00
James Cotton
59972d5570
Limit the number of degrees the vbar can deflect. This is good for fast flips
...
etc.
2012-06-04 12:22:39 -05:00
James Cotton
42ac4018b8
Woops. Fix really nasty bug in vbar mode I introduced. Also fix small bug in
...
scoping of gyro gain that made it not work.
2012-06-04 12:22:39 -05:00
James Cotton
6719ee8639
Add piro compensation option to the vbar mode
2012-06-04 12:22:39 -05:00
James Cotton
3283b99d4e
For hardcode flipping allow full stick to completely override the gyro
...
feedback.
2012-06-04 12:22:39 -05:00
James Cotton
fe978504bc
Add friendly settings for the vbar mode including the VbarTau which acts like
...
the time constant.
2012-06-04 12:22:39 -05:00
James Cotton
ff1b1a93cf
Implement a virtual flybar in a way inspired by behavior of Align 3G which
...
seems apply a leaky integrator to the swash angle. This is the similar to what
is done by Phubar (http://code.google.com/p/phubar/ ) as well although we refer
to the gyro term as the proportional and the flybar angle as the integral
2012-06-04 12:22:38 -05:00
James Cotton
1b55df733d
Create virtual flybar setting for stabilization modes
2012-06-04 12:22:38 -05:00
James Cotton
e341a37bd1
Need to add a small delay after save for the load to work correctly. Odd.
2012-06-03 17:26:10 -05:00
Brian Webb
36f62be3b9
Fixed packet error detection and improved RSSI reading.
2012-06-03 10:07:08 -07:00
James Cotton
25f85ee4fe
Add an error flag to ObjectPersistence and when saving a setting make it verify
...
that the data reads successfully.
2012-06-02 10:23:27 -05:00
Brian Webb
df8a5f8f27
Changed update period for PPM inputs on the PipX. Fixed LED code.
2012-05-31 18:56:07 -07:00
Brian Webb
9a6fb60dd6
Merge remote-tracking branch 'origin/next' into Brian-PipXtreme-V2
2012-05-28 20:18:59 -07:00
Oleg Semyonov
5739dfbfc8
Merge remote-tracking branch 'origin/next' into os/aerosimrc
...
Conflicts:
shared/uavobjectdefinition/gcsreceiver.xml
2012-05-28 21:46:43 +03:00
Oleg Semyonov
910b465ac6
AeroSimRC: do not update sensor and/or attitude data if read-only flag is set
2012-05-28 19:44:34 +03:00
Oleg Semyonov
f95d29a3b8
TxPID: add GyroTau to the list of parameters (OP-637)
2012-05-28 12:48:55 +03:00
James Cotton
5a6e02a688
Merge remote-tracking branch 'origin/Brian-PipXtreme-V2' into next
2012-05-25 20:37:23 -05:00
Brian Webb
b824c87056
Merge remote-tracking branch 'origin/next' into Brian-PipXtreme-V2
2012-05-25 06:26:29 -07:00
Brian Webb
701a480f01
Tuning configutation of PipX.
2012-05-24 18:08:29 -07:00
Corvus Corax
64c1ac3bd6
Stabilization: Bugfix: moved queue initialisation to TaskStart where it belongs
2012-05-22 22:19:31 +02:00
Brian Webb
2f1a9e3e7d
Added PPM input to the PipXtreme. Also added configurable GCSReceiver timeout.
2012-05-20 18:30:37 -07:00
Brian Webb
6a7179120d
Fixed setting of PipX description, and changed gcs receiver object to be update on change on flight side so that it works on the PipX.
2012-05-19 09:25:11 -07:00
Brian Webb
c25884bcaf
Cleanup on the PipX branch.
2012-05-18 17:42:25 -07:00
Brian Webb
68d66d4181
Fixed firmware description in PipX status.
2012-05-17 20:35:17 -07:00
Brian Webb
6fbc3339d5
Fixed processing of UAVTalk packets when in transparent com mode.
2012-05-17 18:37:45 -07:00
Brian Webb
44a1663eb9
Fixed transparent comm on PipX.
2012-05-16 19:02:53 -07:00
Brian Webb
7082eda175
Fixed returning status for currently paired modem.
2012-05-15 20:11:52 -07:00
Brian Webb
93ec7c11a6
Fixed race condition on getting packets.
2012-05-15 19:38:14 -07:00
Brian Webb
a3269aaf2f
Reverted some file permission changes.
2012-05-13 14:24:57 -07:00
Brian Webb
68d12b1b2f
Fixed some bugs with setting PairIDs in GCS.
2012-05-13 14:24:00 -07:00
Brian Webb
dd03b0b159
Added reporting of stats from the remote modem.
2012-05-13 09:34:21 -07:00
Brian Webb
ec67742ff6
Added configuration of COM ports on PipX.
2012-05-12 13:16:36 -07:00
Brian Webb
1f5dbcf57c
Mostly complete PipX configuration GUI.
2012-05-11 17:51:18 -07:00
Oleg Semyonov
a3906aa7ea
Merge remote-tracking branch 'origin/hhrhhr/AeroSimRC_plugin' into os/aerosimrc
2012-05-07 16:09:35 +03:00
Brian Webb
454144f46c
Pairing and saving settings working.
2012-05-06 20:47:21 -07:00
Brian Webb
352471857f
Reverted USB configuration and switched all non-blocking COM calls to blocking, which appears to help prevent lockups now that all sends are in a different thread.
2012-05-06 15:07:07 -07:00
Brian Webb
ef4828032b
Fixed failed merge with next.
2012-05-06 12:38:13 -07:00
