m_thread
a0c82d340b
OP-1617 PlotPicker configuration change.
2015-05-18 21:30:00 +02:00
m_thread
4f1ae4c25d
OP-1617 Added PlotPicker to get readings in numbers out of scope graphs.
2015-05-18 21:30:00 +02:00
m_thread
28c257292f
OP-1659 Added HW config page.
2015-05-18 21:30:00 +02:00
Stefan Karlsson
2630383669
REVONANO - Fix the I2C Error IRQ Handler name for the pressure adapter
2015-05-18 21:29:59 +02:00
Stefan Karlsson
a3fc54ac0b
REVONANO - Fix Baro initialization bug
...
The I2C SCLK pin (A8) was being changed by code used to support battery voltage sensing on the Revo. This code was run after PIOS_I2C_Init but before PIOS_MS5611_Init, causing a BUSY state on the I2C bus before the Barometer initialization code was run.
2015-05-18 21:29:59 +02:00
m_thread
bbb0c34411
OP-1659 Updated uploader image
2015-05-18 21:29:59 +02:00
Laurent Lalanne
57845a7cf9
REVONANO - Disable WDG - Add PathPlanner and PathFollower modules - Fix Tx/Rx buffers for GPS
2015-05-18 21:29:59 +02:00
Stefan Karlsson
8f94aa5353
REVONANO - Use Nano as the USB connection name
2015-05-18 21:29:59 +02:00
Stefan Karlsson
59570c86b2
Remove QT_STATIC_CONST and QT_STATIC_CONST_IMPL
2015-05-18 21:29:58 +02:00
Stefan Karlsson
532b93ddbf
REVONANO - Use Nano picture on the uploader page
2015-05-18 21:29:58 +02:00
Stefan Karlsson
7877798015
REVONANO - Add missing setupwizard setup wizard support of the Nano
2015-05-18 21:29:58 +02:00
Stefan Karlsson
7252fb4207
REVONANO - Fix Auto Upload
2015-05-18 21:29:58 +02:00
Laurent Lalanne
aff4951d02
REVONANO Remove hardcoded Flexiport with telemetry
2015-05-18 21:29:58 +02:00
Stefan Karlsson
21b485aa3f
REVONANO - Fix timers for PPM
2015-05-18 21:29:58 +02:00
Stefan Karlsson
047ee1fcb0
REVONANO - Remove relaytuning from revonano target
2015-05-18 21:29:58 +02:00
Laurent Lalanne
f82a584eb2
REVONANO mpu9250 driver fix for Mag orientation
2015-05-18 21:29:57 +02:00
Alessio Morale
3651ac61a3
REVONANO - Change sensors rate to 333Hz
2015-05-18 21:29:57 +02:00
Alessio Morale
1d7c1b2fc9
REVONANO - Change target to 411, fix ram and flash extents, raise clock to 96MHz (cannot do 100 because of USB) , cleanup spl
2015-05-18 21:29:57 +02:00
Alessio Morale
674963790e
REVONANO - Enable WDG and raise timeout value (due to eeprom reading and initialization being very slow)
2015-05-18 21:29:57 +02:00
Alessio Morale
1e9829b5b7
REVONANO - Upd milestones
2015-05-18 21:29:57 +02:00
Alessio Morale
e5baa8e847
REVONANO - align to 9k setting uniformation
2015-05-18 21:29:57 +02:00
Alessio Morale
15e7286078
MPU9K - merge 9k and 6k settings into a single uavo
2015-05-18 21:29:56 +02:00
Alessio Morale
951c9c2fad
REVONANO - Disable WDG for debug pourposes
2015-05-18 21:29:56 +02:00
Alessio Morale
3563b1ff0e
REVONANO - Prevent modules to start before init: move most code to pios_initcall.h. System and system-Like modules
2015-05-18 21:29:56 +02:00
Stefan Karlsson
efb6855f6f
REVONANO - Various temp fixes debug code to get nano to read from the flash. Code has been added to make the execution of systemTask wait until initTask has completed.
...
Conflicts:
flight/pios/common/pios_flashfs_objlist.c
2015-05-18 21:29:56 +02:00
Stefan Karlsson
2d3c8b835a
REVONANO - Turn on StateEstimate
2015-05-18 21:29:56 +02:00
Stefan Karlsson
8c8abc3cb5
REVONANO - Increase fast_prescaler for the MPU so that it doesn't consume all CPU
2015-05-18 21:29:56 +02:00
Stefan Karlsson
3d0607c4dc
Fix broken GPS UAVO
2015-05-18 21:29:56 +02:00
Alessio Morale
96659f5757
REVONANO - some unused var cleanup
2015-05-18 21:29:55 +02:00
Alessio Morale
288c9019d1
uncrustify
2015-05-18 21:29:55 +02:00
Alessio Morale
51094ba95d
REVONANO - Minor cleanup of MPU9250 driver
2015-05-18 21:29:55 +02:00
Alessio Morale
4ec44cea90
REVONANO - Fix BU target
2015-05-18 21:29:55 +02:00
Alessio Morale
210b75fcb9
REVONANO - Fix MPU Prescalers
2015-05-18 21:29:55 +02:00
Alessio Morale
b6eedaf93d
REVONANO - Fix PIOS_SYSCLK Declaration
2015-05-18 21:29:55 +02:00
Alessio Morale
d2dae79c82
REVONANO - update SPL to 1.4.0 that adds support for f411
2015-05-18 21:29:55 +02:00
Alessio Morale
4a7d81ed01
REVONANO - Fix gyro spi config and include MPU9250 support
2015-05-18 21:29:54 +02:00
Mathieu Rondonneau
66b06e4c9a
REVONANO - Add MPU9250 support
2015-05-18 21:29:42 +02:00
Alessio Morale
fb11b312c5
REVONANO - Flash fs fixes
2015-05-18 21:26:40 +02:00
Alessio Morale
632a14023c
REVONANO - exclude ccram stuffs
2015-05-18 18:55:26 +02:00
Alessio Morale
8a02caa33a
REVONANO - Fix eeprom configuration
2015-05-18 18:55:26 +02:00
Alessio Morale
5c13551a1a
REVONANO - Add support for eeprom and objlist fs
2015-05-18 18:55:25 +02:00
Alessio Morale
8b11861c63
REVONANO - Readd old objlist FS to be used with EEPROM
2015-05-18 18:55:25 +02:00
Alessio Morale
1e1195ec05
REVONANO - Add Eeprom support
2015-05-18 18:55:25 +02:00
Alessio Morale
764a15999f
REVONANO - Make FlashFS_Logfs optional, remove old onchip eeprom files
...
Conflicts:
flight/targets/boards/coptercontrol/firmware/Makefile
2015-05-18 18:55:21 +02:00
Alessio Morale
76ad80fdf5
Revert "objlist: remove now unused objlist flash filesystem"
...
Bring them back to the right path
This reverts commit d89a9b1b6c
.
2015-05-18 18:54:52 +02:00
Alessio Morale
8a54414d70
REVONANO - Fix and cleanup hw configurations, Baro working at this stage
2015-05-18 18:54:52 +02:00
Alessio Morale
805750050c
REVONANO - Support distinct remaps for SDA and SCL
2015-05-18 18:54:52 +02:00
Alessio Morale
375f23ff0c
REVONANO - Make debuglog, FlashFS and other bits optional
2015-05-18 18:54:50 +02:00
Alessio Morale
690e04f4f0
REVONANO - Initial board support
2015-05-18 18:52:09 +02:00
Alessio Morale
6d6be75605
REVONANO - Update SPL to 1.3.0
2015-05-18 18:48:18 +02:00