a*morale
774dde3da5
Normalized the HW configuration to point to _RM_ configuration settins
2012-11-04 13:37:06 +01:00
a*morale
0df1c22933
Fixed channel group for DSM on flexyport
2012-11-03 20:41:33 +01:00
a*morale
553b49cdbf
Fixed Flexy serial assingment and added case for telemetry on flexy port
2012-11-02 23:27:15 +01:00
a*morale
cfbdaddc94
Fixed invalid value for MS5611 oversample configuration
2012-11-02 17:31:51 +01:00
Stacey Sheldon
2119067722
Merge remote-tracking branch 'op-revo/james/revo' into revo-next
...
Conflicts:
Makefile
flight/Modules/Attitude/revolution/attitude.c
flight/Modules/Battery/battery.c
flight/Modules/FixedWingPathFollower/fixedwingpathfollower.c
flight/Modules/GPS/GPS.c
flight/Modules/ManualControl/inc/manualcontrol.h
flight/Modules/ManualControl/manualcontrol.c
flight/Modules/OveroSync/overosync.c
flight/Modules/PathPlanner/inc/pathplanner.h
flight/Modules/PathPlanner/pathplanner.c
flight/Modules/Sensors/sensors.c
flight/Modules/VtolPathFollower/vtolpathfollower.c
flight/PiOS/Boards/STM32F4xx_Revolution.h
flight/PiOS/Boards/pios_board.h
flight/PiOS/STM32F4xx/library.mk
flight/PiOS/inc/pios_hmc5883.h
flight/PiOS/inc/pios_l3gd20.h
flight/PiOS/inc/pios_rfm22b_priv.h
flight/Revolution/Makefile
flight/Revolution/Makefile.osx
flight/Revolution/System/inc/pios_config.h
flight/Revolution/UAVObjects.inc
ground/openpilotgcs/src/libs/utils/coordinateconversions.cpp
ground/openpilotgcs/src/libs/utils/homelocationutil.cpp
ground/openpilotgcs/src/libs/utils/homelocationutil.h
ground/openpilotgcs/src/plugins/config/configrevowidget.cpp
ground/openpilotgcs/src/plugins/hitlnew/il2simulator.cpp
ground/openpilotgcs/src/plugins/opmap/opmapgadgetwidget.cpp
ground/openpilotgcs/src/plugins/plugins.pro
ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
package/Makefile
shared/uavobjectdefinition/fixedwingpathfollowersettings.xml
shared/uavobjectdefinition/fixedwingpathfollowerstatus.xml
shared/uavobjectdefinition/flightstatus.xml
shared/uavobjectdefinition/hwsettings.xml
shared/uavobjectdefinition/manualcontrolsettings.xml
shared/uavobjectdefinition/pathdesired.xml
shared/uavobjectdefinition/vtolpathfollowersettings.xml
shared/uavobjectdefinition/waypoint.xml
2012-10-30 00:08:43 -04:00
James Cotton
879dfed288
RM2/RM1: Make the firmware and bootloader support the pin mappings between these two targets
...
for USB and radio
A side-effect of this is the pipxsettings are no longer populated into the rfm22b cfg structure
as that was made constant to be consistent with other drivers.
2012-10-02 09:31:15 -05:00
a*morale
c2910d0ce0
Receiver input working for both PPM/PWM mode for rm2
2012-09-30 20:54:10 +02:00
James Cotton
dadc38d82d
Revo Mini 2: Get basic LED working. Board revision is actually 3 since right now it masquerades as Revo.
2012-09-26 01:17:32 -05:00
James Cotton
88b483f37d
PIOS_MPU6000: Make the driver perform the rotation to bring it into the OP
...
coordinate system
Previously there were hacks spread throughout to deal with various ways of
positioning the chips. Now the driver structure specifies the rotation
of the chip relative to the board layout and the output X/Y/Z are already
in OP convention.
This flag seems to do the right thing for Revolution, CC3D, and RevoMini
2012-09-11 01:46:22 -05:00
James Cotton
878def305f
RM: Make radio an optional module
2012-09-01 11:11:52 -05:00
James Cotton
0d3b0d4e5b
Fixup: Disable binding on mainport for DSM
2012-09-01 11:11:28 -05:00
James Cotton
f3327e3993
RM: Enabled optional modules and got the battery module working again.
...
Changed the hardcoded (ick) battery lines for RM. Also removed the reference
to PIOS_ADC_GetPin(4) as that pin is no longer available. Finally
changed the default FlightBatterySettings to work out of the box
for the standard recommended sensors.
2012-09-01 11:03:32 -05:00
James Cotton
a33f415866
RM DSM: Get DSM working on the mainport
...
Because of the inverter this does not support binding on this port.
2012-08-31 11:08:43 -05:00
James Cotton
300cee44b4
RM SBUS: There is no pull down on the inverter direction so when not SBUS must explicitly set to off.
2012-08-31 11:01:34 -05:00
James Cotton
d333e24a43
RM: Swap to using the CC_ flags for the flexi port too.
2012-08-31 10:30:00 -05:00
James Cotton
73c7190077
RM GPS: Use the CC_MainPort instead of a RV flag and enable GPS support
2012-08-31 10:17:10 -05:00
James Cotton
bdd50ce66b
Reenable the flash system
2012-08-26 05:03:05 -05:00
James Cotton
2bb4f860e1
Shuffle around the PACKET_HANDLER definition so we can more easily disable the Radio module.
2012-08-25 22:58:11 -05:00
James Cotton
06154836c6
Define the RADIO_BUILTIN in config file
2012-08-25 19:31:48 -05:00
James Cotton
9e25e887c2
Temporarily disable flash chip and configure SPI for modem.
2012-08-25 18:43:13 -05:00
James Cotton
ad7a9b9cc3
Switch the order of the SET_RC pins for flash and rfm22b
2012-08-25 17:49:15 -05:00
James Cotton
76bdb190d8
Link in the rfm module to the target
2012-08-25 17:27:17 -05:00
James Cotton
0decce582b
Got all the sensors reading
2012-08-25 14:19:15 -05:00
James Cotton
31ebb7bbd8
Remove the old BMA180 and L3GD20 code and fix the irq lines for the sensors.
2012-08-25 13:51:52 -05:00
James Cotton
ce5ef7edf3
Update the serial ports and receiver and servo ports
2012-08-25 13:19:23 -05:00
James Cotton
05e2e24bcb
Reconfigure the SPI ports.
2012-08-25 12:38:44 -05:00
James Cotton
60160001c6
Copy the revo project to revo mini
2012-08-25 12:23:54 -05:00
