Lalanne Laurent
2de896818e
Merged in alessiomorale/librepilot/LP-361_notification_improvements (pull request #283 )
...
Lp 361_notification_improvements
2016-07-21 20:05:54 +02:00
Alessio Morale
6b1f4e52be
Merged in TheOtherCliff/librepilot/theothercliff/LP-340_AutoTune_fix_some_time_measurement_issues_in_original_code (pull request #282 )
...
LP-340 Autotune fix some time measurement issues in original code
2016-07-21 19:53:33 +02:00
Alessio Morale
fa041ecf05
LP-361 - Don't lose notifications when more than an alarm is active
...
, fix time between notifications condition, cleanup
2016-07-17 17:13:09 +02:00
Brian Webb
586af77267
LP-190: Fixes an issue with uninitialized OPLink receiver channels.
2016-07-12 17:49:29 -07:00
Brian Webb
a65492b589
LP-190: Removes RFM22B register definitions from pios_rfm22b_priv.h and switches to using pios_rfm22b_regs.h. Alos addresses a few issues brought up in review.
2016-07-12 17:49:28 -07:00
Brian Webb
0738c8a78a
LP-190: Final testing and bug fixes.
2016-07-12 17:47:16 -07:00
Brian Webb
91ea8966da
LP-190: Addes support for OpenLRS receiver protocol to the OPLinkMini. Also updates the OPLink configuration to better support OpenLRS.
2016-07-12 17:47:16 -07:00
Brian Webb
aa21761f4c
LP-190: Adds support for OpenLRS protocol to OPLinkMini
2016-07-12 17:47:16 -07:00
Brian Webb
a0279b272f
LP-190: Initial checkin that adds OpenLRS receiver support to Revolution and OPLinkMini.
2016-07-12 17:45:33 -07:00
Cliff Geerdes
69f1964b12
LP-340 uncrustify
2016-07-12 14:48:11 -04:00
Cliff Geerdes
f2f8d8e712
LP-340 code changes
2016-07-12 14:48:11 -04:00
Alessio Morale
6214c0ea30
Uncrustify
2016-07-03 17:10:46 +02:00
Alessio Morale
c9188fc5a2
Merged in TheOtherCliff/librepilot/theothercliff/LP-76_Port_Autotune_from_dRonin (pull request #198 )
...
Theothercliff/lp 76_port_autotune_from_dronin
2016-07-03 16:09:30 +02:00
Alessio Morale
a2d2e81220
Merged in mindnever/librepilot/LP-342-pios_exti-improvement (pull request #266 )
...
Lp 342 pios_exti improvement
2016-07-03 16:05:03 +02:00
Vladimir Zidar
27cc48b362
LP-343 Change return type from PIOS_COM_Available() to give extended status about RX and TX availability on given COM device.
2016-06-22 01:57:08 +02:00
Vladimir Zidar
fabc3e8d69
LP-342 Simplify pios_exti configuration, allow dynamic configuration and reconfiguration. adds PIOS_EXTI_DeInit()
2016-06-22 00:32:47 +02:00
Cliff Geerdes
aa06b1793f
LP-76 update copyrights
2016-06-18 14:08:05 -04:00
Cliff Geerdes
2105a49ca9
LP-76 add UAV defaults and remove UAV inits
2016-06-18 14:08:03 -04:00
Cliff Geerdes
fdc8b10ddf
LP-72 use TauLabs USB IDs for Sparky2 so users can cross flash LP and TL without SBL.
2016-05-25 13:51:41 +02:00
Laurent Lalanne
afb32d3090
LP-72 Uncrustify after rebase
2016-05-25 13:51:40 +02:00
Cliff Geerdes
2e65449dcc
LP-72 rename revolution.cpp rename revo defines rename revo comments
2016-05-25 13:51:38 +02:00
James Duley
5e02fb2da7
simposix don't #define false in c++
2016-05-20 21:30:53 +01:00
Alessio Morale
5156c0c911
LP-304 - Allow further info to be added to PERF_INIT_COUNTER for future feature support.
...
This may allow in future to extract the counters id list with grep to be handled by gcs or other custom tools
Proposed usage:
PERF_INIT_COUNTER(counterVariable, id, "MODULE NAME","COUNTER DESCRIPTION","UNIT OF MEASURE");
i.e.:
PERF_INIT_COUNTER(counterExecutionTime, 0xAC700001, "ACTUATOR", "Actuator update execution time", "uS");
2016-05-03 00:07:35 +02:00
Alessio Morale
1b254e4182
LP-304 - Prevent errors when dealing with variables used only for instrumentation
2016-05-03 00:07:10 +02:00
Alessio Morale
bf639b486d
LP-304 - declare counters as static
2016-05-03 00:06:24 +02:00
Laurent Lalanne
c9fff7e16e
LP-151 OPLink: Allow custom Device ID or auto generated.
2016-05-01 21:56:50 +02:00
Laurent Lalanne
593cf7bc61
Typo PIOS_RFM22B_GetPairStats()
2016-03-12 17:56:05 +01:00
Alessio Morale
089c224514
Merged in alessiomorale/librepilot/amorale/LP-96_cpu_idle_counter (pull request #37 )
...
LP-96 Updated CPU idle counter / LP-97 unify CopterControl and Revolution init process
2016-02-19 20:19:05 +01:00
Fredrik Arvidsson
0d660d33ad
LP-104 LP-196 Changes to address review comments and then uncrustification.
2016-01-16 12:19:34 +01:00
Fredrik Arvidsson
c06fb0249f
LP-104 LP-196 Uncrustify and some other formatting issues fixed.
2016-01-10 10:12:54 +01:00
Fredrik Arvidsson
d32cc0e7fb
Merge branch 'thread/LP-104_LP-196_HoTT_and_Ex.Bus_Support_15.09' into thread/LP-104_LP-196_HoTT_and_Ex.Bus_Support
2016-01-09 19:18:48 +01:00
Fredrik Arvidsson
02c981388a
Merge branch 'thread/LP-196_Jeti_Ex_Bus_15.09' into thread/LP-104_LP-196_HoTT_and_Ex.Bus_Support_15.09
...
# Conflicts:
# flight/targets/boards/coptercontrol/board_hw_defs.c
# flight/targets/boards/coptercontrol/firmware/pios_board.c
# flight/targets/boards/revolution/board_hw_defs.c
# flight/targets/boards/revolution/firmware/inc/pios_config.h
# flight/targets/boards/revolution/firmware/pios_board.c
# flight/targets/boards/revonano/firmware/inc/pios_config.h
# flight/targets/boards/revonano/firmware/pios_board.c
# shared/uavobjectdefinition/hwsettings.xml
# shared/uavobjectdefinition/manualcontrolsettings.xml
# shared/uavobjectdefinition/receiveractivity.xml
2016-01-09 16:59:24 +01:00
Fredrik Arvidsson
3e920bc5bc
LP-196 Added driver for Jeti EX.Bus protocol. Added support for CopterControl target on Main and Flexi port. This is WIP and not tested yet.
2015-12-26 12:29:04 +01:00
Fredrik Arvidsson
e6d4638201
LP-104 Adds support for Graupner HoTT SUMD/SUMH serial protocol used by receivers on Main and Flexi port.
...
Still work in progress. Only supports CopterControl target and crashes on input :(
2015-12-20 11:08:15 +01:00
Alessio Morale
70faa04b0a
LP-97 - Move board init function declarations to a pios_board_init.h, fix some headers
2015-11-08 18:47:31 +01:00
Cliff Geerdes
e0a805518f
LP-73 uncrustify
2015-10-25 23:59:52 -04:00
Cliff Geerdes
7de55812dd
LP-73 changes for pull request comments
2015-10-24 12:09:22 -04:00
Cliff Geerdes
d9b7a0bb00
LP-73 port extmag to all other boards
2015-10-24 12:09:21 -04:00
Cliff Geerdes
b086d1a021
LP-73 ExtMag fix some more watchdog issues
2015-10-24 12:09:20 -04:00
Cliff Geerdes
d4b0d106f8
LP-73 External Mags on I2C initial coding
2015-10-24 12:09:19 -04:00
Alessio Morale
b88681c69f
LP-97 - Move the common Init process within the System module (coptercontrol/revolution)
2015-09-03 23:40:24 +02:00
Alessio Morale
3eaf1ef3c3
LP-96 - Implement CPU idle counters and calibration functions
2015-09-03 20:05:25 +02:00
Roy Bekken
ad84547637
Update all changed files against GIT log with copyright headers consistency.
2015-08-19 16:15:58 +02:00
a*morale
dd6c6054e9
Revert "OP-1810 FOC"
...
This reverts commit 92e50c2ead
2015-07-15 00:07:50 +02:00
Alessio Morale
1ce23d722c
REVONANO - Raise the number of leds supported to 10, added limits
2015-05-18 21:30:05 +02:00
Alessio Morale
43f04a340b
OP-1658 - MPU9250 support for sensor "reset", fix temperature measurement
2015-05-18 21:30:01 +02:00
Alessio Morale
928f1385ec
OP-1658 - MPU9250 sensor device model implementation
2015-05-18 21:30:00 +02:00
Alessio Morale
15e7286078
MPU9K - merge 9k and 6k settings into a single uavo
2015-05-18 21:29:56 +02:00
Alessio Morale
3563b1ff0e
REVONANO - Prevent modules to start before init: move most code to pios_initcall.h. System and system-Like modules
2015-05-18 21:29:56 +02:00
Alessio Morale
51094ba95d
REVONANO - Minor cleanup of MPU9250 driver
2015-05-18 21:29:55 +02:00
