Alessio Morale 233dec6d8d OP-1379 - Various fixes and additions ...

- Support blocks of led for notification (that is a certain number of leds between a min and a max index);
- Fix an issue with bogus colours on fast updates at LED N°0.
- Add NOTIFY_SEQUENCE_NULL to skip handling a specific alarm status;
- Adjust sequences and add Config and Receiver Alarms;
- fix issue with Alarm trigger/repetition;
- Enables Notify module only if a WS281x output is enabled.
- Add some documentation for sequence/alarm definitions (sequences.h)
- Make sequences more coherent. All GPS related info are now shown in green.
- Revert to original blinking rate for onboard led
- add Notify on DiscoveryF4Bare target

2014-09-06 12:11:53 +02:00

..

pios_adc_priv.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_adc.h

OP-1227 Fix high CPU usage: Optimize Memory usage in ADC driver.

2014-06-08 22:01:05 +02:00

pios_adxl345.h

OP-1227 Fix high CPU usage: Reduce Accel rate to 1600Hz, optimize sample reading, explicitly set bus speed

2014-06-08 21:33:18 +02:00

pios_bkp.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_bl_helper.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_bma180.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_bmp085.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_board_info.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_callbackscheduler.h

OP-942 duplicated exact API of task_monitor to also monitor callbacks

2014-02-07 22:39:16 +01:00

pios_com_msg_priv.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_com_msg.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_com_priv.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_com.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_constants.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_crc.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_debug.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_debuglog.h

more intelligent log interfacing, including flash formatting option

2013-11-17 20:14:50 +01:00

pios_delay.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_deltatime.h

OP-1211 time_measurement_helper

2014-02-04 19:05:17 +01:00

pios_dsm_priv.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_dsm.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_eeprom.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_etasv3.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_exti.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_flash_internal_priv.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_flash_jedec_catalog.h

OP-1395 - Add support for Fast read, explicitly set SPI clock speed to maximum allowed by all parts used

2014-07-08 02:53:25 +02:00

pios_flash_jedec_priv.h

OP-1395 - Add support for Fast read, explicitly set SPI clock speed to maximum allowed by all parts used

2014-07-08 02:53:25 +02:00

pios_flash.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_flashfs_logfs_priv.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_flashfs.h

Uncrustify

2013-06-18 20:23:46 +02:00

pios_gcsrcvr_priv.h

Rename flight/PiOS->flight/pios

2013-04-25 13:13:41 +03:00

pios_gpio_priv.h

Adds missing pios_gpio_priv.h

2013-08-02 22:01:44 -07:00

pios_gpio.h

Moves pios_led functionality to pios_gpio and makes pios_led a thin layer over pios_gpio. Supports configuring multiple sets of GPIOs.

2013-07-28 07:01:08 -07:00

pios_hcsr04_priv.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_hcsr04.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_helpers.h

OP-980 Extended the memory barrier macros and fixed barrier kind in pios_usb_hid

2013-06-06 10:26:41 +02:00

pios_hmc5x83.h

OP-1403 - Add support for multiple hmc* devices

2014-08-02 20:48:41 +02:00

pios_hmc5843.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_i2c_esc.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_i2c_priv.h

OP-1273 OP-1282 OP-1283 uncrustify

2014-03-31 22:17:58 +02:00

pios_i2c.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_iap.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_initcall.h

OP-976: RE-run uncrustify

2013-06-05 19:48:56 -07:00

pios_instrumentation_helper.h

OP-1365 fix comments

2014-06-18 02:01:16 +02:00

pios_instrumentation.h

OP-1365 fix comments

2014-06-18 02:01:16 +02:00

pios_irq.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_l3gd20.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_led_priv.h

Moves pios_led functionality to pios_gpio and makes pios_led a thin layer over pios_gpio. Supports configuring multiple sets of GPIOs.

2013-07-28 07:01:08 -07:00

pios_led.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_math.h

Changed CoordinateConversion to use doubles for LLA2NED conversion, so coordinates can be represented in ECEF with sufficient resolution

2013-06-05 20:40:49 +02:00

pios_mem.h

OP-943 inline pios_mem function have issues with simposix.

2014-06-11 22:15:40 +02:00

pios_mpu6000_config.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_mpu6000.h

OP-1049: Hotfix to 13.06.02 for MPU6000 FIFO overflow on CC3D when board initialisation takes

2013-07-28 01:16:22 +09:30

pios_mpxv.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_ms4525do.h

OP-1273 New files for the MS4525DO PixHawk speed sensor: PIOS files and module files

2014-03-25 10:37:10 +01:00

pios_ms5611.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_notify.h

OP-1379 add base types for colour, Initial ext rgb led api definition

2014-08-12 09:44:44 +02:00

pios_oplinkrcvr_priv.h

OP-932: Adds an oplink receiver device, which is based on the gcs receiver device, but uses the OPLinkReceiver UAVObject. The OPLinkReceiver packets are generated on the OPLink modem.

2013-06-26 17:56:20 -07:00

pios_overo_priv.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_overo.h

Rename flight/PiOS->flight/pios

2013-04-25 13:13:41 +03:00

pios_posix.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_ppm_out_priv.h

OP-932 Moves the PIOS_PPM_OUT_Set function from pios_ppm_out_priv.h to pios_ppm_out.h

2013-06-26 17:55:56 -07:00

pios_ppm_out.h

OP-932 Moves the PIOS_PPM_OUT_Set function from pios_ppm_out_priv.h to pios_ppm_out.h

2013-06-26 17:55:56 -07:00

pios_ppm_priv.h

OP-932 Adds a semaphore to PPM input to signal when a new frame has been received. This can be used to process a new frame with as low a latency as possible.

2013-06-26 17:56:10 -07:00

pios_ppm.h

Rename flight/PiOS->flight/pios

2013-04-25 13:13:41 +03:00

pios_pwm_priv.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_pwm.h

Rename flight/PiOS->flight/pios

2013-04-25 13:13:41 +03:00

pios_rcvr_priv.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_rcvr.h

OP-932 Adds a semaphore to PPM input to signal when a new frame has been received. This can be used to process a new frame with as low a latency as possible.

2013-06-26 17:56:10 -07:00

pios_rfm22b_com.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_rfm22b_priv.h

OP-932 Adds a direct PPM channel on each Tx packet when in PPM mode, and adds a PPM only mode that uses a 9600 bps air datarate. Also updates the OPLink configuration tab and moves all OPLink configuration to the OPLink configuration tab on the Revo, and customizes the OPLink configuration tab for the Revo.

2013-06-26 18:01:54 -07:00

pios_rfm22b.h

Adds a failsafe on PPM output on OPLink that kicks in when the link goes down. Also updates all air datarate settings and adds new 64 and 100 kbps modes.

2013-06-29 15:00:38 -07:00

pios_rtc_priv.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_rtc.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_sbus_priv.h

Uncrustification

2014-01-19 12:37:25 +01:00

pios_sbus.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_sdcard.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_servo_priv.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_servo.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_spi_priv.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_spi.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_stm32.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_struct_helper.h

OP-1058 Get rid of Unions.

2013-09-01 12:10:55 +02:00

pios_sys.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_task_monitor.h

OP-1026 fix review issues

2014-03-09 16:08:27 +01:00

pios_tim_priv.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_tim.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_udp_priv.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_udp.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_usart_priv.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_usart.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_usb_board_data_priv.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_usb_cdc_priv.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_usb_defs.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_usb_desc_hid_cdc_priv.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_usb_desc_hid_only_priv.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_usb_hid_priv.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_usb_hid.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_usb_priv.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_usb_util.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_usb.h

OP-980 Fix usb reconnection issue for Revolution target.

2013-06-05 00:04:26 +02:00

pios_usbhook.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_video.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_wavplay.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_wdg.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_ws2811_cfg.h

OP-1379 - Various fixes and additions

2014-09-06 12:11:53 +02:00

pios_ws2811.h

OP-1379 - Split pios_ws2811.h in config and public api header

2014-08-12 22:19:30 +02:00

stm32f2xx_conf.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

stm32f4xx_conf.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

stm32f10x_conf.h

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00