.. |
libraries
|
REVONANO - update SPL to 1.4.0 that adds support for f411
|
2015-05-18 21:29:55 +02:00 |
pios_adxl345.c
|
OP-1658 - Fixes to other (old and deprecated) sensors
|
2015-02-03 00:00:05 +01:00 |
pios_bma180.c
|
OP-1658 - Fixes to other (old and deprecated) sensors
|
2015-02-03 00:00:05 +01:00 |
pios_bmp085.c
|
OP-1658 - Fixes to other (old and deprecated) sensors
|
2015-02-03 00:00:05 +01:00 |
pios_board_info.c
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_callbackscheduler.c
|
OP-943 uses pios_mem API for heap allocation
|
2014-06-11 22:15:40 +02:00 |
pios_com_msg.c
|
OP-1275 - add ChangeBaud to PIOS_COM_MSG
|
2014-09-16 00:42:51 +02:00 |
pios_com.c
|
OP-1849 Hooks all in place for CDC line state changes to drive port GPIO for DTR
|
2015-04-26 03:05:47 +01:00 |
pios_crc.c
|
OP-1122 OP-1158 added facility to update a CRC with uavobject data (flight side)
|
2014-01-12 15:12:41 +01:00 |
pios_debuglog.c
|
REVONANO - Make debuglog, FlashFS and other bits optional
|
2015-05-18 18:54:50 +02:00 |
pios_deltatime.c
|
OP-1211 removed unneeded define
|
2014-02-06 19:34:34 +01:00 |
pios_dosfs_logfs.c
|
Yaffs or dosfs now conditional linkage for simposix yaffs testing
|
2014-10-28 08:48:38 +11:00 |
pios_etasv3.c
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_flash_eeprom.c
|
REVONANO - Various temp fixes debug code to get nano to read from the flash. Code has been added to make the execution of systemTask wait until initTask has completed.
|
2015-05-18 21:29:56 +02:00 |
pios_flash_jedec.c
|
OP-1395 - Add support for Fast read, explicitly set SPI clock speed to maximum allowed by all parts used
|
2014-07-08 02:53:25 +02:00 |
pios_flashfs_logfs.c
|
OP-943 uses pios_mem API for heap allocation
|
2014-06-11 22:15:40 +02:00 |
pios_flashfs_objlist.c
|
REVONANO - Various temp fixes debug code to get nano to read from the flash. Code has been added to make the execution of systemTask wait until initTask has completed.
|
2015-05-18 21:29:56 +02:00 |
pios_gcsrcvr.c
|
OP-943 uses pios_mem API for heap allocation
|
2014-06-11 22:15:40 +02:00 |
pios_hcsr04.c
|
OP-943 uses pios_mem API for heap allocation
|
2014-06-11 22:15:40 +02:00 |
pios_hmc5x83.c
|
OP-1820 - Add mag orientation parameter in hmc configuration
|
2015-04-03 20:40:52 +02:00 |
pios_hmc5843.c
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_i2c_esc.c
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_iap.c
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_instrumentation.c
|
OP-1365 - adds quick and dirty decays to max and min values
|
2015-02-03 00:00:05 +01:00 |
pios_l3gd20.c
|
OP-1658 - Fixes to other (old and deprecated) sensors
|
2015-02-03 00:00:05 +01:00 |
pios_led.c
|
Moves pios_led functionality to pios_gpio and makes pios_led a thin layer over pios_gpio. Supports configuring multiple sets of GPIOs.
|
2013-07-28 07:01:08 -07:00 |
pios_logfs.c
|
uncrustification!
|
2014-11-08 12:59:16 +01:00 |
pios_mem.c
|
OP-1804: Add realloc.
|
2015-04-16 22:52:09 -07:00 |
pios_mpu6000.c
|
OP-1658 - Various fixes for MPU6000 and HMC5x83
|
2015-02-03 00:00:06 +01:00 |
pios_mpu9250.c
|
REVONANO - Disable Sensitivity Adjustment values.
|
2015-05-18 21:30:01 +02:00 |
pios_mpxv.c
|
OP-1869 "scale" lower case
|
2015-05-13 21:55:18 +02:00 |
pios_ms4525do.c
|
OP-1273 OP-1282 OP-1283 uncrustify
|
2014-03-31 22:17:58 +02:00 |
pios_ms5611.c
|
OP-1793 - Use a constant for running average smoothing factor
|
2015-03-20 22:11:29 +01:00 |
pios_notify.c
|
OP-1379 - Prevent loosing any update to background notification and notifications with priority higher than current
|
2014-09-21 23:32:52 +02:00 |
pios_oplinkrcvr.c
|
OP-1803 Report link quality for OPLink
|
2015-04-04 22:02:54 +01:00 |
pios_rcvr.c
|
OP-1803 Return link quality of zero rather than throw an exception if no receiver if the receiver port is undefined
|
2015-04-20 21:40:42 +01:00 |
pios_rfm22b_com.c
|
OP-932 Adds a direct PPM channel on each Tx packet when in PPM mode, and adds a PPM only mode that uses a 9600 bps air datarate. Also updates the OPLink configuration tab and moves all OPLink configuration to the OPLink configuration tab on the Revo, and customizes the OPLink configuration tab for the Revo.
|
2013-06-26 18:01:54 -07:00 |
pios_rfm22b.c
|
Uncrustify
|
2015-03-22 20:26:36 +01:00 |
pios_sbus.c
|
OP-1803 Uncrustify
|
2015-04-03 18:30:36 +01:00 |
pios_sdcard.c
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_sensors.c
|
OP-1658 - various fixes
|
2015-02-03 00:00:05 +01:00 |
pios_srxl.c
|
OP-1837 Uncrustify
|
2015-04-26 21:08:54 +02:00 |
pios_task_monitor.c
|
OP-943 uses pios_mem API for heap allocation
|
2014-06-11 22:15:40 +02:00 |
pios_trace.c
|
uncrustification!
|
2014-11-08 12:59:16 +01:00 |
pios_ubx_dcc.c
|
OP-1477 - Add pios_ubx_ddc driver to handle i2c comms with UBlox GPS
|
2014-09-16 22:40:52 +02:00 |
pios_usb_desc_hid_cdc.c
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_usb_desc_hid_only.c
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_usb_util.c
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_video.c
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_wavplay.c
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |