.. |
pios_adc_priv.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_adc.h
|
OP-1227 Fix high CPU usage: Optimize Memory usage in ADC driver.
|
2014-06-08 22:01:05 +02:00 |
pios_adxl345.h
|
OP-1227 Fix high CPU usage: Reduce Accel rate to 1600Hz, optimize sample reading, explicitly set bus speed
|
2014-06-08 21:33:18 +02:00 |
pios_bkp.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_bl_helper.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_bma180.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_bmp085.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_board_info.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_callbackscheduler.h
|
OP-942 duplicated exact API of task_monitor to also monitor callbacks
|
2014-02-07 22:39:16 +01:00 |
pios_com_msg_priv.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_com_msg.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_com_priv.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_com.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_constants.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_crc.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_debug.h
|
OP-922 Mark PIOS_DEBUG_Panic with attribute noreturn
|
2014-08-16 16:57:50 +02:00 |
pios_debuglog.h
|
more intelligent log interfacing, including flash formatting option
|
2013-11-17 20:14:50 +01:00 |
pios_delay.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_deltatime.h
|
OP-1211 time_measurement_helper
|
2014-02-04 19:05:17 +01:00 |
pios_dsm_priv.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_dsm.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_eeprom.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_etasv3.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_exti.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_flash_internal_priv.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_flash_jedec_catalog.h
|
uncrustify
|
2014-08-13 15:54:52 +02:00 |
pios_flash_jedec_priv.h
|
OP-1405 - Add support for 25qxxx series of flash memories
|
2014-08-02 23:05:36 +02:00 |
pios_flash.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_flashfs_logfs_priv.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_flashfs.h
|
Uncrustify
|
2013-06-18 20:23:46 +02:00 |
pios_gcsrcvr_priv.h
|
Rename flight/PiOS->flight/pios
|
2013-04-25 13:13:41 +03:00 |
pios_gpio_priv.h
|
Adds missing pios_gpio_priv.h
|
2013-08-02 22:01:44 -07:00 |
pios_gpio.h
|
Moves pios_led functionality to pios_gpio and makes pios_led a thin layer over pios_gpio. Supports configuring multiple sets of GPIOs.
|
2013-07-28 07:01:08 -07:00 |
pios_hcsr04_priv.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_hcsr04.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_helpers.h
|
OP-980 Extended the memory barrier macros and fixed barrier kind in pios_usb_hid
|
2013-06-06 10:26:41 +02:00 |
pios_hmc5x83.h
|
OP-1403 - Add support for multiple hmc* devices
|
2014-08-02 20:48:41 +02:00 |
pios_hmc5843.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_i2c_esc.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_i2c_priv.h
|
OP-1273 OP-1282 OP-1283 uncrustify
|
2014-03-31 22:17:58 +02:00 |
pios_i2c.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_iap.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_initcall.h
|
OP-976: RE-run uncrustify
|
2013-06-05 19:48:56 -07:00 |
pios_instrumentation_helper.h
|
OP-1365 fix comments
|
2014-06-18 02:01:16 +02:00 |
pios_instrumentation.h
|
OP-1365 fix comments
|
2014-06-18 02:01:16 +02:00 |
pios_irq.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_l3gd20.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_led_priv.h
|
Moves pios_led functionality to pios_gpio and makes pios_led a thin layer over pios_gpio. Supports configuring multiple sets of GPIOs.
|
2013-07-28 07:01:08 -07:00 |
pios_led.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_math.h
|
OP-1317 added M_2PI_F and M_2PI_D constants for 2*pi in pios_math.h
|
2014-07-23 08:03:12 +02:00 |
pios_mem.h
|
OP-943 inline pios_mem function have issues with simposix.
|
2014-06-11 22:15:40 +02:00 |
pios_mpu6000_config.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_mpu6000.h
|
OP-1049: Hotfix to 13.06.02 for MPU6000 FIFO overflow on CC3D when board initialisation takes
|
2013-07-28 01:16:22 +09:30 |
pios_mpxv.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_ms4525do.h
|
OP-1273 New files for the MS4525DO PixHawk speed sensor: PIOS files and module files
|
2014-03-25 10:37:10 +01:00 |
pios_ms5611.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_notify.h
|
OP-1302 Add a stub pios_notify API for user interaction/notifications
|
2014-04-13 17:42:57 +02:00 |
pios_oplinkrcvr_priv.h
|
OP-932: Adds an oplink receiver device, which is based on the gcs receiver device, but uses the OPLinkReceiver UAVObject. The OPLinkReceiver packets are generated on the OPLink modem.
|
2013-06-26 17:56:20 -07:00 |
pios_overo_priv.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_overo.h
|
Rename flight/PiOS->flight/pios
|
2013-04-25 13:13:41 +03:00 |
pios_posix.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_ppm_out_priv.h
|
OP-932 Moves the PIOS_PPM_OUT_Set function from pios_ppm_out_priv.h to pios_ppm_out.h
|
2013-06-26 17:55:56 -07:00 |
pios_ppm_out.h
|
OP-932 Moves the PIOS_PPM_OUT_Set function from pios_ppm_out_priv.h to pios_ppm_out.h
|
2013-06-26 17:55:56 -07:00 |
pios_ppm_priv.h
|
OP-932 Adds a semaphore to PPM input to signal when a new frame has been received. This can be used to process a new frame with as low a latency as possible.
|
2013-06-26 17:56:10 -07:00 |
pios_ppm.h
|
Rename flight/PiOS->flight/pios
|
2013-04-25 13:13:41 +03:00 |
pios_pwm_priv.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_pwm.h
|
Rename flight/PiOS->flight/pios
|
2013-04-25 13:13:41 +03:00 |
pios_rcvr_priv.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_rcvr.h
|
OP-932 Adds a semaphore to PPM input to signal when a new frame has been received. This can be used to process a new frame with as low a latency as possible.
|
2013-06-26 17:56:10 -07:00 |
pios_rfm22b_com.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_rfm22b_priv.h
|
OP-932 Adds a direct PPM channel on each Tx packet when in PPM mode, and adds a PPM only mode that uses a 9600 bps air datarate. Also updates the OPLink configuration tab and moves all OPLink configuration to the OPLink configuration tab on the Revo, and customizes the OPLink configuration tab for the Revo.
|
2013-06-26 18:01:54 -07:00 |
pios_rfm22b.h
|
Adds a failsafe on PPM output on OPLink that kicks in when the link goes down. Also updates all air datarate settings and adds new 64 and 100 kbps modes.
|
2013-06-29 15:00:38 -07:00 |
pios_rtc_priv.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_rtc.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_sbus_priv.h
|
Uncrustification
|
2014-01-19 12:37:25 +01:00 |
pios_sbus.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_sdcard.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_servo_priv.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_servo.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_spi_priv.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_spi.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_stm32.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_struct_helper.h
|
OP-1456 get rid of cast_struct_to_array because it is error prone!
|
2014-08-24 00:16:34 +02:00 |
pios_sys.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_task_monitor.h
|
OP-1026 fix review issues
|
2014-03-09 16:08:27 +01:00 |
pios_tim_priv.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_tim.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_udp_priv.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_udp.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_usart_priv.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_usart.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_usb_board_data_priv.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_usb_cdc_priv.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_usb_defs.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_usb_desc_hid_cdc_priv.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_usb_desc_hid_only_priv.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_usb_hid_priv.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_usb_hid.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_usb_priv.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_usb_util.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_usb.h
|
OP-980 Fix usb reconnection issue for Revolution target.
|
2013-06-05 00:04:26 +02:00 |
pios_usbhook.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_video.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_wavplay.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_wdg.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_ws2811.h
|
OP-1312 keep pulse timings low to have more margin to handle bus contentions and irq response time.
|
2014-05-11 18:57:06 +02:00 |
stm32f2xx_conf.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
stm32f4xx_conf.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
stm32f10x_conf.h
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |