..
libraries
LP-512 Initial F3 support
2017-05-25 22:08:16 +02:00
pios_adxl345.c
OP-1658 - Fixes to other (old and deprecated) sensors
2015-02-03 00:00:05 +01:00
pios_bma180.c
OP-1658 - Fixes to other (old and deprecated) sensors
2015-02-03 00:00:05 +01:00
pios_bmp085.c
OP-1658 - Fixes to other (old and deprecated) sensors
2015-02-03 00:00:05 +01:00
pios_bmp280.c
LP-512 Uncrustify
2017-05-25 22:08:39 +02:00
pios_board_info.c
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
2013-05-19 17:37:30 +03:00
pios_board_io.c
LP-512 pios_usart: Shared ports support: Initializing same uart multiple times will return shared driver instance. Added uart configuration locking ioctl.
2017-05-30 15:08:32 +02:00
pios_board_sensors.c
LP-529 Fixed i2c port selection for aux mag.
2017-06-14 16:10:24 +02:00
pios_callbackscheduler.c
Raise callbackscheduler stack size
2015-05-18 21:30:03 +02:00
pios_com_msg.c
OP-1275 - add ChangeBaud to PIOS_COM_MSG
2014-09-16 00:42:51 +02:00
pios_com.c
LP-512 Bring back accidentally removed function
2017-05-25 22:08:37 +02:00
pios_crc.c
OP-1122 OP-1158 added facility to update a CRC with uavobject data (flight side)
2014-01-12 15:12:41 +01:00
pios_debuglog.c
LP-381 - Adds circular buffer and run writes within a separate callback
2016-08-17 19:57:29 +02:00
pios_deltatime.c
OP-1211 removed unneeded define
2014-02-06 19:34:34 +01:00
pios_dosfs_logfs.c
Yaffs or dosfs now conditional linkage for simposix yaffs testing
2014-10-28 08:48:38 +11:00
pios_dsm.c
LP-480 DSM: do not fail to initialize driver for ports without bind capability.
2017-04-27 16:27:53 +02:00
pios_etasv3.c
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
2013-05-19 17:37:30 +03:00
pios_exbus.c
LP-480 Move PIOS_COM_SetHalfDuplex() functionality to IOCTL. Remove RX/TX mode and change parameter order for PIOS_COM_ChangeConfig() and com driver set_config to match the databits/parity/stopbits scheme (like for example 8N1).
2017-04-24 13:04:23 +02:00
pios_flash_eeprom.c
REVONANO - emulate bigger sector size for erase operations
2015-05-18 21:30:02 +02:00
pios_flash_jedec.c
LP-512 PikoBLX board added
2017-05-25 22:08:38 +02:00
pios_flashfs_logfs.c
LP-83 fix two known bricking scenarios
2015-12-16 01:46:59 -05:00
pios_flashfs_objlist.c
REVONANO - Fix erase settings
2015-05-18 21:30:02 +02:00
pios_gcsrcvr.c
OP-943 uses pios_mem API for heap allocation
2014-06-11 22:15:40 +02:00
pios_hcsr04.c
OP-943 uses pios_mem API for heap allocation
2014-06-11 22:15:40 +02:00
pios_hmc5x83.c
LP-423 - Modified IRQHandler
2016-09-30 23:24:09 +02:00
pios_hmc5843.c
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
2013-05-19 17:37:30 +03:00
pios_hott.c
LP-480 Move PIOS_COM_SetHalfDuplex() functionality to IOCTL. Remove RX/TX mode and change parameter order for PIOS_COM_ChangeConfig() and com driver set_config to match the databits/parity/stopbits scheme (like for example 8N1).
2017-04-24 13:04:23 +02:00
pios_i2c_esc.c
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
2013-05-19 17:37:30 +03:00
pios_iap.c
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
2013-05-19 17:37:30 +03:00
pios_ibus.c
LP-480 Move PIOS_COM_SetHalfDuplex() functionality to IOCTL. Remove RX/TX mode and change parameter order for PIOS_COM_ChangeConfig() and com driver set_config to match the databits/parity/stopbits scheme (like for example 8N1).
2017-04-24 13:04:23 +02:00
pios_instrumentation.c
OP-1365 - adds quick and dirty decays to max and min values
2015-02-03 00:00:05 +01:00
pios_l3gd20.c
OP-1658 - Fixes to other (old and deprecated) sensors
2015-02-03 00:00:05 +01:00
pios_led.c
Moves pios_led functionality to pios_gpio and makes pios_led a thin layer over pios_gpio. Supports configuring multiple sets of GPIOs.
2013-07-28 07:01:08 -07:00
pios_logfs.c
uncrustification!
2014-11-08 12:59:16 +01:00
pios_mem.c
OP-1804: Add realloc.
2015-04-16 22:52:09 -07:00
pios_mpu6000.c
LP-529 [F3] [I2C] Move i2c bus unlocking down to irq, to save one context switch and make bus available for use by other drivers sooner.
2017-06-14 16:10:50 +02:00
pios_mpu9250.c
LP-512 Initial F3 support
2017-05-25 22:08:16 +02:00
pios_mpxv.c
OP-1869 "scale" lower case
2015-05-13 21:55:18 +02:00
pios_ms4525do.c
OP-1273 OP-1282 OP-1283 uncrustify
2014-03-31 22:17:58 +02:00
pios_ms5611.c
LP-529 [I2C] [MS5611] Remove PIOS_DELAY_WaitmS() and move (re)initialization into fsm.
2017-06-14 16:12:35 +02:00
pios_notify.c
LP-361 - Don't lose notifications when more than an alarm is active
2016-07-17 17:13:09 +02:00
pios_openlrs_rcvr.c
LP-484 This change removes custom PIOS_OpenLRS_Rcvr_UpdateChannels() api in favor of PIOS_OpenLRS_RegisterPPMCallback() to be in line with other receiver modules. Furthermore, this commit moves the openlrs/oplink ppm callback from pios_board.c into *rcvr* module itself.
2017-02-21 16:44:20 +01:00
pios_openlrs.c
LP-484 Addressed PR review issues.
2017-02-21 19:54:18 +01:00
pios_oplinkrcvr.c
LP-484 This change removes custom PIOS_OpenLRS_Rcvr_UpdateChannels() api in favor of PIOS_OpenLRS_RegisterPPMCallback() to be in line with other receiver modules. Furthermore, this commit moves the openlrs/oplink ppm callback from pios_board.c into *rcvr* module itself.
2017-02-21 16:44:20 +01:00
pios_rcvr.c
OP-1803 Return link quality of zero rather than throw an exception if no receiver if the receiver port is undefined
2015-04-20 21:40:42 +01:00
pios_rfm22b_com.c
LP-437 - Add support for a secondary radio stream and associated AuxCom driver
2017-01-06 16:02:28 +01:00
pios_rfm22b.c
LP-538 Set correct reg.72 value for 256kbps and 150Khz Tx deviation - Cleanup
2017-06-25 16:06:31 +02:00
pios_sbus.c
LP-512 Initial F3 support
2017-05-25 22:08:16 +02:00
pios_sdcard.c
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
2013-05-19 17:37:30 +03:00
pios_semaphore.c
LP-190: Initial checkin that adds OpenLRS receiver support to Revolution and OPLinkMini.
2016-07-12 17:45:33 -07:00
pios_sensors.c
LP-281 use correct operator
2016-04-07 01:00:42 +02:00
pios_servo.c
LP-512 Initial F3 support
2017-05-25 22:08:16 +02:00
pios_srxl.c
LP-480 Move PIOS_COM_SetHalfDuplex() functionality to IOCTL. Remove RX/TX mode and change parameter order for PIOS_COM_ChangeConfig() and com driver set_config to match the databits/parity/stopbits scheme (like for example 8N1).
2017-04-24 13:04:23 +02:00
pios_task_monitor.c
LP-96 - Implement CPU idle counters and calibration functions
2015-09-03 20:05:25 +02:00
pios_thread.c
LP-190: Initial checkin that adds OpenLRS receiver support to Revolution and OPLinkMini.
2016-07-12 17:45:33 -07:00
pios_trace.c
uncrustification!
2014-11-08 12:59:16 +01:00
pios_ubx_dcc.c
LP-537 Remove requirement for left shifting I2C addresses on the F0 devices. This makes the I2C driver on F0 compatible with the other devices.
2017-06-24 15:08:16 -07:00
pios_usb_desc_hid_cdc.c
LP-480 Moved sensors initialization to pios_board_sensors.c
2017-04-24 13:03:07 +02:00
pios_usb_desc_hid_only.c
LP-480 work in progress: revo, nano & sparky2 targets ok.
2017-04-24 12:55:06 +02:00
pios_usb_util.c
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
2013-05-19 17:37:30 +03:00
pios_video.c
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
2013-05-19 17:37:30 +03:00
pios_wavplay.c
LP-72 Various typo fixes - Set PPM input as default
2016-05-25 13:51:41 +02:00
8f91f1b49b