Brian Webb
4ee7249b4a
LP-540 Adds support for ms5607 and ms5637 to the ms5611 driver and renames it ms56xx.
2017-07-08 09:14:58 -07:00
Brian Webb
081fda25a1
LP-537 Changes startup code on GPSV9 to call PIOS_Board_Init after scheduler start.
2017-06-24 15:28:04 -07:00
Brian Webb
b47a3ad393
LP-537 The LED should be configured active low on the GPSV9.
2017-06-24 15:11:41 -07:00
Vladimir Zidar
b523f69f0e
LP-512 Addressed most of the PR comments.
2017-05-26 01:06:31 +02:00
Philippe Renon
0a494a034f
Merged in filnet/librepilot/LP-516_gps_jumptoapp_hangs_board (pull request #421 )
...
LP-516 gps jumptoapp hangs board
Approved-by: Philippe Renon <philippe_renon@yahoo.fr>
Approved-by: Lalanne Laurent <f5soh@free.fr>
Approved-by: Alessio Morale <alessiomorale@gmail.com>
Approved-by: Brian Webb <webbbn@gmail.com>
2017-05-15 20:18:18 +00:00
Philippe Renon
4e3f480304
LP-516 gps: bump bootloader version (from 1 to 2)
2017-05-03 09:05:28 +02:00
Philippe Renon
a116bd2313
LP-516 gps: issuing a JumpToApp in bootloader mode will not hang board anymore
...
ssp_dfu guard variable was preventing any user triggered JumpToApp to be fully completed
2017-05-03 09:05:11 +02:00
Vladimir Zidar
83326eaca3
LP-480 all targets build nicely.
2017-04-24 13:04:03 +02:00
Vladimir Zidar
a6f7cc6cdf
LP-480 gpsplatinum board_hw_defs cleanup
2017-04-24 13:03:11 +02:00
Vladimir Zidar
16020c1839
LP-480 GPSplatinum pios_usart fixes. Bootloader now fits again.
2017-04-24 13:03:11 +02:00
Vladimir Zidar
dd49ef0166
LP-480 work in progress: revo, nano & sparky2 targets ok.
2017-04-24 12:55:06 +02:00
Philippe Renon
1c222bdf09
LP-402 remove unused taskinfo and callbackinfo includes
2017-01-16 09:04:37 +01:00
Alessio Morale
089c224514
Merged in alessiomorale/librepilot/amorale/LP-96_cpu_idle_counter (pull request #37 )
...
LP-96 Updated CPU idle counter / LP-97 unify CopterControl and Revolution init process
2016-02-19 20:19:05 +01:00
Alessio Morale
70faa04b0a
LP-97 - Move board init function declarations to a pios_board_init.h, fix some headers
2015-11-08 18:47:31 +01:00
James Duley
e308039206
LP-99 Decouple flight build
...
Moved flight make code into flight/Makefile. This should speed up
rebuilds for GCS and keeps the top level Makefile tidier.
Change-Id: I9d33cb5c223b6a8ed2821435a5d63ecf4b97c6b8
2015-09-02 19:34:58 +12:00
Roy Bekken
ad84547637
Update all changed files against GIT log with copyright headers consistency.
2015-08-19 16:15:58 +02:00
paul Jewell
6b6461c8b4
Replaced OPENPILOT_IS_COOL by TOP_LEVEL_MAKEFILE
2015-07-15 08:06:21 +01:00
Alessio Morale
805750050c
REVONANO - Support distinct remaps for SDA and SCL
2015-05-18 18:54:52 +02:00
Alessio Morale
ee19ff893e
OP-1820 - Add mag orientation parameter in hmc configuration
2015-04-03 20:40:52 +02:00
Alessio Morale
857cead7c7
OP-1658 - Fixes for other targets (OSD and GPS)
2015-02-03 00:00:06 +01:00
Alessio Morale
8e2e534c60
Uncrustify/clean commented code
2014-10-03 11:41:26 +02:00
Alessio Morale
ae9f30c729
OP-1477 - Fix mag exti config, set correct rate, set correct SPI speed for hmc5x83. Note: GPIO is disabled as it seems there is some issues with Exti on PB0
2014-10-01 02:07:46 +02:00
Alessio Morale
2885a20acb
OP-1477 - add watchdog support
2014-09-16 22:51:28 +02:00
Alessio Morale
2f50dbeee5
OP-1477 - Split and cleanup gpssys module
2014-09-16 22:40:55 +02:00
Alessio Morale
1fa2bfddc6
OP-1477 - Add GPS System Module
2014-09-16 22:40:54 +02:00
Alessio Morale
531d80a69c
OP-1476 - Fix other targets for OP_DFU changes
2014-09-16 22:40:54 +02:00
Alessio Morale
b971b713d6
OP-1476 - Fix Bootloader jumpToApp condition and change speed to 57600
2014-09-16 22:40:53 +02:00
Alessio Morale
7e73c59e90
OP-1476 - Fixes for Bootloader
...
- Allocate 10KBytes for bootloader;
- Replace pios_com_msg with pios_com for ssp support
- Change Speed to 9600 for higher reliability
2014-09-16 22:40:53 +02:00
Alessio Morale
c44dac2447
OP-1476 - fix bootloader for serial support
2014-09-16 22:40:53 +02:00
Alessio Morale
3eca0fefef
OP-1477 - Change mag GAIN to 1.3
2014-09-16 22:40:53 +02:00
Alessio Morale
250b7fe962
OP-1477 - Fix mag DRDY/GPIO support
2014-09-16 22:40:52 +02:00
Alessio Morale
14862c687d
OP-1477 - Add ubx handling libraries
2014-09-16 22:40:52 +02:00
Alessio Morale
a6fc5c9190
OP-1477 - Fixes for multi device support of HMC5x driver
2014-09-16 22:40:52 +02:00
Alessio Morale
bcb30ecbf3
OP-1477 - enable temp compensation and fix axis orders
2014-09-16 22:40:52 +02:00
Alessio Morale
4890ef3ab0
OP-1477 - Add support for Flash
2014-09-16 22:40:52 +02:00
Alessio Morale
146c1764fd
OP-1477 - UBX_DDC driver implementation
2014-09-16 22:40:52 +02:00
Alessio Morale
71af403c9d
OP-1477 - some cleanup
2014-09-16 22:40:51 +02:00
Alessio Morale
7e55d6ff41
OP-1477 - add support for SPI/MAG
2014-09-16 22:40:51 +02:00
Alessio Morale
b4f9c7c2b1
OP-1477 - BL fix issue with usart name
2014-09-16 22:40:51 +02:00
Alessio Morale
b3a971e91d
OP-1477 - support for mag
2014-09-16 22:40:51 +02:00
Alessio Morale
c28eb4fbca
OP-1477 - Add SPI Support
2014-09-16 22:40:51 +02:00
Alessio Morale
46424523b0
OP-1477 - Firmware usart Working
2014-09-16 22:40:51 +02:00
Alessio Morale
1970e0a870
OP-1477 - Fix bootloader
2014-09-16 22:40:50 +02:00
Alessio Morale
9b61fc611b
OP-1477 - Add platform support
2014-09-16 22:40:50 +02:00
