Alessio Morale
4f6c7dcb00
OP-1658 - Fixes to other (old and deprecated) sensors
2015-02-03 00:00:05 +01:00
Alessio Morale
4b01d0d2ea
OP-1658 - fix temp interleaving for MS5611
2015-02-03 00:00:05 +01:00
Alessio Morale
adbcdecb41
OP-1365 - adds quick and dirty decays to max and min values
2015-02-03 00:00:05 +01:00
Alessio Morale
73a7dc00d4
OP-1658 - MS5611 sensor framework model support
2015-02-03 00:00:05 +01:00
Alessio Morale
fc125540b7
OP-1658 - various fixes
...
Conflicts:
flight/pios/common/pios_mpu9250.c
2015-02-03 00:00:05 +01:00
Alessio Morale
621c1e8679
OP-1658 - MPU6000 & HMC5x83 make driver struct const
2015-02-03 00:00:05 +01:00
Alessio Morale
84f577029e
OP-1658 - HMC5x83 sensor device model implementation
2015-02-03 00:00:05 +01:00
Alessio Morale
6341fa7eca
OP-1658 - MPU6000 sensor device model implementation
2015-02-03 00:00:05 +01:00
Alessio Morale
4d8b36adad
OP-1658 - Remove sensors includes from pios.h to prevent cross dependencies
2015-02-03 00:00:05 +01:00
Alessio Morale
49b8b1f93e
OP-1658 - Add PIOS_SENSORS and Sensor framework API
2015-02-03 00:00:05 +01:00
Karl Knutsson
d161ebbc74
OP-1522 address review comments
2015-02-02 21:25:38 +01:00
Karl Knutsson
137c183ec2
OP-1522 Remove unused channel set cfg
...
Remove unused channel set configuration option.
With the new channel allocation the old channel set
configuration isn't needed.
2015-02-02 21:25:38 +01:00
Karl Knutsson
a3715598c7
OP-1522 New channel allocation
...
Generate a pseudo random list of channels from hmac_sha1 with the
coordid as key.
Enforce channel spacing based on the frequency deviation derived
from the configured data rate.
2015-02-02 21:25:38 +01:00
Karl Knutsson
9bf18490b1
OP-1522: Channel timeout logic
...
Use real time rather than missed pickets when deciding if we are
disconneted. Makes the link less sensitive at higher rates since
higher rates means more chances to get a packet through within the
given time.
2015-02-02 21:25:38 +01:00
Karl Knutsson
b0491da115
OP-1576: Remove unused tx_resent counter
...
Remove unused tx_resent counter and replace it with
rx_failure in link quality calculations.
2015-02-02 21:25:38 +01:00
Karl Knutsson
52c1080ffe
OP-1522 Robustness of OPLink radio
...
Increase number of channels to 32 for all bit rates.
Synchronize clock on all channels.
Go into failsafe after 4 or 8 (one_way_link) missed packets.
Don't stay on channel 0 if we dropped a packet.
2015-02-02 21:25:38 +01:00
Erik Gustavsson
966ef5ce75
OP-1680 Increase the range and resolution of OPLink PPM values
...
Encode 511 steps plus a single "invalid" value, rather than 256 steps
plus a dedicated valid flag bit. This gives a range of 990 - 2010 us in
steps of 2 us.
2015-02-02 21:25:37 +01:00
Laurent Lalanne
c506fc93d6
OP-1674 Revert changes from previous commit in flight side, keep comments changes
2015-01-22 19:49:06 +01:00
Laurent Lalanne
4c27a78072
OP-1674 Allow channel 250
2015-01-12 12:57:01 +01:00
Werner Backes
d9a3fac502
Disable the "preamble invalid" interrupt for the RFM22b module. It causes
...
high CPU load and isn't used anyway.
2014-11-15 11:37:06 +01:00
Corvus Corax
c21d3d8a67
uncrustification!
2014-11-08 12:59:16 +01:00
Alex Beck
e2b38d0d7d
Yaffs or dosfs now conditional linkage for simposix yaffs testing
2014-10-28 08:48:38 +11:00
abeck70
942945850b
Merge branch 'next' into abeck/OP_1503v3-yaffs
2014-10-23 21:25:54 +11:00
Karl Knutsson
5ab924c07e
Revert "OP-1522 Robustness of OPLink radio"
...
This reverts commit 00d9c66867
2014-10-16 08:23:10 +02:00
Karl Knutsson
5ef8d3803d
Revert "OP-1530 Use rfm22b_dev->num_channels"
...
This reverts commit 4e365f6dff
2014-10-16 08:23:10 +02:00
Karl Knutsson
b69e222456
Revert "OP-1532 fix non-ppm mode"
...
This reverts commit 9fd4fb26b9
2014-10-16 08:23:10 +02:00
abeck70
de68e0179f
First round review comments
2014-10-14 17:17:59 +11:00
Alessio Morale
4a8cfe3f86
OP-1535 - Refactor MPU6k driver to allow direct and fifo access based on configuration
2014-10-10 22:33:50 +02:00
Alessio Morale
9350bd65d9
OP-1535 - change sensor rate to 1KHz with software downsample to 500Hz
...
Allow per board SPI prescaler settings
2014-10-10 22:33:49 +02:00
abeck70
948d6546af
yaffs simposix ready for review
...
All yaffs changes for library inclusion, arm compilation, and simposix integration.
2014-10-10 13:21:06 +11:00
Karl Knutsson
9fd4fb26b9
OP-1532 fix non-ppm mode
...
Always send packets from the coordinator.
Previously the coordinator only always sent packets
on channel 0. This scheme doesn't work with
with the change to use 32 channel.
2014-10-08 20:59:51 +02:00
Fredrik Larsson
cb6e9fda6d
Merge remote-tracking branch 'origin/havyan/oplink-0' into next
2014-10-08 08:02:48 +11:00
Karl Knutsson
4e365f6dff
OP-1530 Use rfm22b_dev->num_channels
...
Use the number of allocated channel from the num_channels field
in the pios_rfm22b_dev struct rather than from the maximum number
of possible of channels given the configured speed.
2014-10-07 22:50:52 +02:00
Karl Knutsson
00d9c66867
OP-1522 Robustness of OPLink radio
...
Increase number of channels to 32 for all bit rates.
Synchronize clock on all channels.
Go into failsafe after 4 or 8 (one_way_link) missed packets.
Don't stay on channel 0 if we dropped a packet.
2014-10-03 22:20:11 +02:00
Karl Knutsson
1c6e9b3cc4
OP-1510 don't hard code tx_power to 100mW
2014-10-03 22:20:11 +02:00
Alessio Morale
e553014596
Merge branch 'amorale/OP-1476_1477_1275_GPSV9_pios_firmware_bootloader' into next
2014-10-03 00:37:55 +02:00
Alessio Morale
9cfd55d006
Merge branch 'amorale/OP-1507_gps_module_cpu_optimization' into next
2014-10-03 00:37:39 +02:00
Alessio Morale
ae9f30c729
OP-1477 - Fix mag exti config, set correct rate, set correct SPI speed for hmc5x83. Note: GPIO is disabled as it seems there is some issues with Exti on PB0
2014-10-01 02:07:46 +02:00
Alessio Morale
9e0596c2c5
Merge remote-tracking branch 'origin/amorale/OP-1379_ext_led_notification_module_new' into next
...
Conflicts:
Makefile
flight/targets/boards/discoveryf4bare/firmware/Makefile
flight/targets/boards/revolution/firmware/Makefile
2014-09-29 21:26:31 +02:00
Alessio Morale
93cf6b457f
OP-1507 - optimize com fifo usage when RX callback receives a single byte
2014-09-27 00:20:15 +02:00
Alessio Morale
3c6a8e0395
OP-1379 - Prevent loosing any update to background notification and notifications with priority higher than current
2014-09-21 23:32:52 +02:00
Alessio Morale
f2a0daac5c
OP-1477 - Add pios_ubx_ddc driver to handle i2c comms with UBlox GPS
2014-09-16 22:40:52 +02:00
Alessio Morale
984a7a675c
OP-1275 - add ChangeBaud to PIOS_COM_MSG
2014-09-16 00:42:51 +02:00
Alessio Morale
94c39caa50
OP-1275 - Fix PIOS_COM to be used with no PIOS_INCLUDE_FREERTOS defined
2014-09-16 00:42:51 +02:00
Alessio Morale
b4c1a856c7
OP-1274 Implement 4 bytes aligment for standard malloc (while keeping 8byte alignment for RTOS Stuctures) as done for M3
2014-09-16 00:42:48 +02:00
Fredrik Larrson
ebfdaf28b5
Merge remote-tracking branch 'origin/havyan/OP-1473_sbus_eof' into next
2014-09-08 01:35:39 +10:00
Karl Knutsson
ec0d44e1b0
OP-1473 Fix EOF handling for R7008SB
2014-09-04 18:15:36 +02:00
Alessio Morale
1f74977472
OP-1379 add base types for colour, Initial ext rgb led api definition
2014-08-12 09:44:44 +02:00
Alessio Morale
6a3cb7b808
OP-1403 - Add support for multiple hmc* devices
2014-08-02 20:48:41 +02:00
Alessio Morale
57a43a5587
OP-1403 - Migrate to new HMC5x83 driver and remove old HMC5883 one
2014-08-02 20:48:34 +02:00
