rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-12 20:08:48 +01:00
Code Issues Releases Activity
2,671 Commits 5 Branches 8 Tags 266 MiB
0e3ae58c96
Commit Graph

2671 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
peabody124
e393000c34 OP-238 PIOS/SPI: Decrease pin clock rate from 50 to 10 Mhz. Since data at 
1.125 MHz this should slow down the slew rates

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2361 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-09 20:49:46 +00:00
peabody124
5734e1f437 OP-176 PIOS/ADC: Decrease the priority of the ADC DMA/IRQ 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2360 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-09 20:49:43 +00:00
peabody124
0175e25ddf Flight/ADC: If there is a DMA error for the ADC transfer dont copy those values 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2359 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-09 20:49:39 +00:00
peabody124
148ea6fdc1 Flight: Make PWM outputs default to 0 us to avoid either pushing servos to 
exteremes or running up motors

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2358 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-09 20:49:35 +00:00
peabody124
24c4e92b12 OP-176 FreeRTOS task priorities a bit more sensible 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2357 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-09 20:49:33 +00:00
peabody124
85b7619617 OP-176 OP-238 Flight/IRQ and DMA: Increased the priority of the AHRS DMA 
transfer, seems to reduce CRC errors

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2356 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-09 20:49:29 +00:00
peabody124
0f07d7f671 OP-240 OP-176 Flight: Setting the priority group back to 4 (anything higher 
priority preempts) and adjusting the priorities around to be more sensible.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2355 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-09 20:49:26 +00:00
edouard
79f72bda47 OP-248 Enable serial device polling on Windows too as automatic detection seems to be unreliable. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2354 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-09 18:43:03 +00:00
osnwt
9827746847 GCS/Windows installer: fixed working directory in shortcuts, added shortcut comments. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2353 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-09 14:13:48 +00:00
edouard
30b165c302 Update to Dials widget to check for NaN values in UAVObjects: a NaN can cause the GCS to freeze inside the dial repaint operations. This will ensure that the GCS does 
not freeze if things go south on the firmware.



git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2352 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-09 13:11:32 +00:00
edouard
79c4ba60f6 Explicitely close the serial port upon DFU object deletion. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2351 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-09 09:53:56 +00:00
vassilis
b851c11f53 Flight/Stack sizes: Reduced task stack sizes to free-up memory in preparation of the scripting release. If the firmware is unstable there might be a possible stack overflow, test carefully! 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2350 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-09 00:03:19 +00:00
vassilis
407e660c97 Flight/TaskMonitor: Create TaskMonitor library, used to monitor the remaining task size of all running tasks. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2349 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-08 23:43:34 +00:00
vassilis
1bdc03bb1c GCS/UAVObjects: Added TaskInfo object 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2348 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-08 23:40:49 +00:00
edouard
d6cb01edf2 OP-244 Attempt to solve the issue. Cannot reproduce on my system, but I have made a few changes to declare the OP_DFU::Status using the Q_ENUMS macro. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2347 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-08 13:22:15 +00:00
peabody124
d8022a320d OP-238 PiOS/USB: Fix for problem Ed's being see where being plugged into usb 
but not having telemetry causes a reset.  If the buffer got full enough it
would never start to transmit again.

Note: also making Telemetry non-blocking

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2346 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-08 08:05:02 +00:00
edouard
05de5492d9 Uploader gadget: on Reset, go through a board detection too, since it seems to be necessary to get a proper reboot of the ARHS too. Makes reboot over telemetry link work too. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2345 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-07 20:54:34 +00:00
edouard
c4b6b16181 OP-242 : Fix notify crash on Linux. Additional check on phono media object in the playback callback to avoid race conditions. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2344 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-07 14:59:54 +00:00
edouard
489fde5357 OP-233 Further work on Temperature compensation for gyros (GCS config). Everyting is in place to sample data and compute the regression. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2343 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-06 23:43:03 +00:00
peabody124
ccc8bc089b OP-235 AHRS: Not sending the out of range values to the mainboard was blocking 
calibration.  Now only don't send them to the EKF.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2342 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-06 16:44:40 +00:00
cwabbott
050ade4899 PiOS.win32: UAVObject changes, and double the timer tick length to accommodate the MMCSS-set timer tick and be more in line with PiOS.posix. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2341 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-05 22:47:47 +00:00
edouard
31d9230ad7 OP-233 Mock up of Gyro drift calibration interface added. Sliders will autoupdate when the temperature changes, and will 
compute the new drift value, with a button to update it. Will probably add an icon indicating whether the temperature difference
is large enough to compute a reliable drift.



git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2340 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-05 21:26:42 +00:00
edouard
02c261462d OP-233 Start reorganizing the UI for AHRS config, since it is becoming way to busy with all the calibration capabilities. Now using tabs, let me know if you like it. This is a work in progress. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2339 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-05 20:39:23 +00:00
pip
75793a1687 Now using down-sampling on the baro temperature & pressure readings. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2338 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-05 12:19:49 +00:00
pip
572284966d Forgot to add "#ifdef ALT_PRES_MAF" into init code. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2337 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-05 11:28:04 +00:00
pip
cb8e9ef07b Added a moving-average-filter to the pressure reading, and increased BMP085 oversampling from 2 to 3 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2336 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-05 11:26:47 +00:00
peabody124
6eae425644 OP-235 AHRS: Because of range checking at initialization the EKF can be blocked 
(which is good) but that stops the comms polling.  This makes it happen
ocassionally but not too much.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2335 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-05 10:34:48 +00:00
peabody124
77d798071e OP-235 AHRS: Check the downsampled data for either being ridiculously out of 
range of NaN.  This would reflect a race condition probably from the SPI
interaction.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2334 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-05 10:34:45 +00:00
peabody124
0e7661539e OP-238 AHRS Comms: Bring down clock rate of comms to AHRS to 2.25 MHz. Decrease 
to only transmitting one object per transmission too to keep size down.
Also move to using the driver structure so the paramter is in a clear place.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2333 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-05 10:34:42 +00:00
peabody124
3e9ee37c73 Flight/ManualControl: Require the roll signal to only go to 0.90 to arm and 
disarm

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2332 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-05 10:34:39 +00:00
pip
4a91f20277 Turn AHRS orange LED on at bootup (to try and spot possible bootup hangs). 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2331 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-05 09:15:37 +00:00
edouard
609b244007 OP-234 Reset button now works again. Slightly tighter timing on board detection, if you get issues on Windows or MacOS, please let me know! 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2330 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-04 22:03:27 +00:00
osnwt
b463bd2a09 GCS: Fixed config gadget description and some cleanup in *.pluginspec. No code changes. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2329 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-04 21:52:21 +00:00
peabody124
30b122afa9 GCS/Config: Edit tab stop order to be more intuitive 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2328 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-04 17:30:09 +00:00
corvus
a59d08b7af AHRS: Support for Linear Temperature Compensation Factors for Gyroscope X,Y,Z 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2327 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-04 00:54:31 +00:00
martin
a0bf048090 Removed the default settings 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2326 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-03 21:26:09 +00:00
corvus
5b9a50127f GCS: UAVObjectBrowser: Use new widget for editing floats that supports scientific notation 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2325 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-03 15:29:02 +00:00
osnwt
b826d4e51f Ground: Windows NSIS multilingual installer script and resources. To build the installer one needs an Unicode NSIS package and optionally SubWCRev utility (part of TortoiseSVN client, also available separately) to embed some interesting revision info into the installer executable. Please help with translations of strings_xx.nsh (utf-8 files). Only English and Russian are currently translated. Initial installer language is detected automatically but can be changed by user. Some hooks to the GCS should be done to preset a language on the 1st run. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2324 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-03 03:13:09 +00:00
andrew
af77839747 OP-84 
Battery module for Power Sensor version 2
This is the first checkin of code for the new sensor board.
This has been tested for Voltage calibration bit not Current yet.
This will set and clear system alarms appropriately.


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2323 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-03 01:23:04 +00:00
edouard
82f092f115 Serial plugin: small change to wait long enough for the Unix serial polling thread to exit - removes one warning on the logger. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2322 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-02 22:22:28 +00:00
edouard
6091f0be63 Bugfix for dials text and minimum range. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2321 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-02 15:11:37 +00:00
edouard
0e43a0af5b Updated the default OpenPilotGCS.ini to reflect the latest dial additions. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2320 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-02 15:11:14 +00:00
edouard
9b61879146 New Barometer dial for the 'default' set. This one uses an experimental feature of the dials plugin, which enables the display of the value on the dial on top of the needle, let me know if you like it. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2319 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-02 14:49:17 +00:00
edouard
035c035f5b Added the barometer from the Deluxe set into the share directory. The default .ini file will be updated once all my work on analog dials is done. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2318 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-02 12:17:22 +00:00
osnwt
87b3d482d5 Ground: Some housekeeping for Windows packaging. No other changes. See also OP-92, OP-93, OP-221. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2317 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-02 00:32:09 +00:00
osnwt
2ea7f39b87 Moved remaining Wix installer files under Wix subdirectory. Also deleted DefaultSettings folder with files (they are not required anymore since included into the Core plugin as default settings). 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2316 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-01 20:54:13 +00:00
edouard
0a554f79da Raw HID plugin: clean up debug output so that at least it does not use multiple lines. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2315 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-01 20:41:43 +00:00
corvus
c01676eed2 sim_posix: Makefile: fixed line ending - and added missing UAVObject 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2314 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-31 19:31:55 +00:00
dankers
d124ce8311 Update MILESTONES for Sambas' flips. I also started adding maintainers to the CREDITS.txt file but have not finished this yet. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2313 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-31 18:49:58 +00:00
edouard
a552addbf7 Updated the serial plugin to poll every 2 secs for new Serial ports on MacOS and Linux, where we don't get system events whenever a Serial/USB adapter is plugged in. No change 
on windows where the OS already told our plugin about such events. Polling thread is lightweight, no worries...



git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2312 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-30 23:00:49 +00:00