1
0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-04 12:24:11 +01:00
Commit Graph

5742 Commits

Author SHA1 Message Date
Cliff Geerdes
92295559b0 OP-1464 GPS autobaud - stash while debugging newobject issue 2015-05-18 18:37:53 -04:00
Laurent Lalanne
1aceea7532 REVONANO : Enable all Airspeed modules 2015-05-18 23:08:43 +02:00
Alessio Morale
9fa1fe870a OP-1803 - Add support to RevoNano 2015-05-18 21:36:13 +02:00
Alessio Morale
1ce23d722c REVONANO - Raise the number of leds supported to 10, added limits 2015-05-18 21:30:05 +02:00
Alessio Morale
d521ce6023 REVONANO - Add support for WS2811 led on servo output 1.
To free timer1, a unused timer (9) is assigned on the fly to servo out 1 to leave pin mappings unchanged. A better approach should be implemented Later (jira 1035)
2015-05-18 21:30:05 +02:00
Alessio Morale
04c067e8cd REVONANO - Workaround an approximation bug in SPL UART code.
Due to some approximation bug in SPL 100000 gives a prescaler of 29 resulting in (48000000 / 29) / 16 (oversampling)  = 103448
99999 gives a nice 30 resulting in exactly 100000.
2015-05-18 21:30:04 +02:00
Alessio Morale
295ca38026 REVONANO - Fix Prescaler settings for APB1 and 2 (48MHz and 96MHz) 2015-05-18 21:30:04 +02:00
Werner Backes
25b5278b05 Corrected mpu9250 magnetometer axis orientation. 2015-05-18 21:30:04 +02:00
Alessio Morale
8cb9f8b802 REVONANO - Enable some other modules (battery, airspeed, CameraStab) for testing 2015-05-18 21:30:04 +02:00
Alessio Morale
109c21a8ab REVONANO - Workaround for the SBUS issue (use oversample 8 instead of 16 to reduce the bitrate error) 2015-05-18 21:30:04 +02:00
Alessio Morale
3fd75273f5 Cleanup/uncrustify 2015-05-18 21:30:04 +02:00
Alessio Morale
0d714fb861 REVONANO - Change Power Regulatro Scale mode to Scale1.
Looks like stm32f4xx_Clock_Configuration_V1.1.0 seems like doesn't play well with 411. Reg Scale mode was wrong
2015-05-18 21:30:03 +02:00
abeck70
c0618258ad OP-1760 nano statusvtol addition 2015-05-18 21:30:03 +02:00
Alessio Morale
3152ebcaf0 OP-1828 - add support for Revonano 2015-05-18 21:30:03 +02:00
Alessio Morale
15a5022c7e Raise callbackscheduler stack size 2015-05-18 21:30:03 +02:00
Alessio Morale
2c96835555 REVONANO - Fix System stack size 2015-05-18 21:30:03 +02:00
Alessio Morale
40fa643cca REVONANO - Cleanup servo pin definitions, map PPM as last channel 2015-05-18 21:30:02 +02:00
Alessio Morale
855361488a REVONANO - emulate bigger sector size for erase operations 2015-05-18 21:30:02 +02:00
Alessio Morale
5ca6e43070 REVONANO - Fix erase settings 2015-05-18 21:30:02 +02:00
Alessio Morale
2497b3d605 REVONANO - some cleanup 2015-05-18 21:30:02 +02:00
Alessio Morale
60f8a8d9f0 REVONANO - Move PPM to input 2 to support oneshot 2015-05-18 21:30:02 +02:00
Alessio Morale
2dcc9e5deb OP-1659 - Revonano, raise sensor rate to 500Hz 2015-05-18 21:30:01 +02:00
Alessio Morale
54b83085bb OP-1696 - Revonano cpp support 2015-05-18 21:30:01 +02:00
Alessio Morale
895540974a REVONANO - Disable Sensitivity Adjustment values. 2015-05-18 21:30:01 +02:00
Alessio Morale
cf09616ba8 OP-1685 - OneShot support for revonano 2015-05-18 21:30:01 +02:00
Alessio Morale
e4dc6b0b64 OP-1658 - baro support for revonano 2015-05-18 21:30:01 +02:00
Alessio Morale
43f04a340b OP-1658 - MPU9250 support for sensor "reset", fix temperature measurement 2015-05-18 21:30:01 +02:00
Alessio Morale
174340d8bf OP-1658 - Various fixes for MPU9250 2015-05-18 21:30:01 +02:00
Alessio Morale
94d30f7ad2 OP-1658 - Add RevoNano support 2015-05-18 21:30:00 +02:00
Alessio Morale
928f1385ec OP-1658 - MPU9250 sensor device model implementation 2015-05-18 21:30:00 +02:00
Alessio Morale
5a140957f9 REVONANO - Update uavos list 2015-05-18 21:30:00 +02:00
Stefan Karlsson
2630383669 REVONANO - Fix the I2C Error IRQ Handler name for the pressure adapter 2015-05-18 21:29:59 +02:00
Stefan Karlsson
a3fc54ac0b REVONANO - Fix Baro initialization bug
The I2C SCLK pin (A8) was being changed by code used to support battery voltage sensing on the Revo. This code was run after PIOS_I2C_Init but before PIOS_MS5611_Init, causing a BUSY state on the I2C bus before the Barometer initialization code was run.
2015-05-18 21:29:59 +02:00
Laurent Lalanne
57845a7cf9 REVONANO - Disable WDG - Add PathPlanner and PathFollower modules - Fix Tx/Rx buffers for GPS 2015-05-18 21:29:59 +02:00
Stefan Karlsson
8f94aa5353 REVONANO - Use Nano as the USB connection name 2015-05-18 21:29:59 +02:00
Stefan Karlsson
7252fb4207 REVONANO - Fix Auto Upload 2015-05-18 21:29:58 +02:00
Laurent Lalanne
aff4951d02 REVONANO Remove hardcoded Flexiport with telemetry 2015-05-18 21:29:58 +02:00
Stefan Karlsson
21b485aa3f REVONANO - Fix timers for PPM 2015-05-18 21:29:58 +02:00
Stefan Karlsson
047ee1fcb0 REVONANO - Remove relaytuning from revonano target 2015-05-18 21:29:58 +02:00
Laurent Lalanne
f82a584eb2 REVONANO mpu9250 driver fix for Mag orientation 2015-05-18 21:29:57 +02:00
Alessio Morale
3651ac61a3 REVONANO - Change sensors rate to 333Hz 2015-05-18 21:29:57 +02:00
Alessio Morale
1d7c1b2fc9 REVONANO - Change target to 411, fix ram and flash extents, raise clock to 96MHz (cannot do 100 because of USB) , cleanup spl 2015-05-18 21:29:57 +02:00
Alessio Morale
674963790e REVONANO - Enable WDG and raise timeout value (due to eeprom reading and initialization being very slow) 2015-05-18 21:29:57 +02:00
Alessio Morale
e5baa8e847 REVONANO - align to 9k setting uniformation 2015-05-18 21:29:57 +02:00
Alessio Morale
15e7286078 MPU9K - merge 9k and 6k settings into a single uavo 2015-05-18 21:29:56 +02:00
Alessio Morale
951c9c2fad REVONANO - Disable WDG for debug pourposes 2015-05-18 21:29:56 +02:00
Alessio Morale
3563b1ff0e REVONANO - Prevent modules to start before init: move most code to pios_initcall.h. System and system-Like modules 2015-05-18 21:29:56 +02:00
Stefan Karlsson
efb6855f6f REVONANO - Various temp fixes debug code to get nano to read from the flash. Code has been added to make the execution of systemTask wait until initTask has completed.
Conflicts:
	flight/pios/common/pios_flashfs_objlist.c
2015-05-18 21:29:56 +02:00
Stefan Karlsson
2d3c8b835a REVONANO - Turn on StateEstimate 2015-05-18 21:29:56 +02:00
Stefan Karlsson
8c8abc3cb5 REVONANO - Increase fast_prescaler for the MPU so that it doesn't consume all CPU 2015-05-18 21:29:56 +02:00
Alessio Morale
96659f5757 REVONANO - some unused var cleanup 2015-05-18 21:29:55 +02:00
Alessio Morale
288c9019d1 uncrustify 2015-05-18 21:29:55 +02:00
Alessio Morale
51094ba95d REVONANO - Minor cleanup of MPU9250 driver 2015-05-18 21:29:55 +02:00
Alessio Morale
4ec44cea90 REVONANO - Fix BU target 2015-05-18 21:29:55 +02:00
Alessio Morale
210b75fcb9 REVONANO - Fix MPU Prescalers 2015-05-18 21:29:55 +02:00
Alessio Morale
b6eedaf93d REVONANO - Fix PIOS_SYSCLK Declaration 2015-05-18 21:29:55 +02:00
Alessio Morale
d2dae79c82 REVONANO - update SPL to 1.4.0 that adds support for f411 2015-05-18 21:29:55 +02:00
Alessio Morale
4a7d81ed01 REVONANO - Fix gyro spi config and include MPU9250 support 2015-05-18 21:29:54 +02:00
Mathieu Rondonneau
66b06e4c9a REVONANO - Add MPU9250 support 2015-05-18 21:29:42 +02:00
Alessio Morale
fb11b312c5 REVONANO - Flash fs fixes 2015-05-18 21:26:40 +02:00
Alessio Morale
632a14023c REVONANO - exclude ccram stuffs 2015-05-18 18:55:26 +02:00
Alessio Morale
8a02caa33a REVONANO - Fix eeprom configuration 2015-05-18 18:55:26 +02:00
Alessio Morale
5c13551a1a REVONANO - Add support for eeprom and objlist fs 2015-05-18 18:55:25 +02:00
Alessio Morale
8b11861c63 REVONANO - Readd old objlist FS to be used with EEPROM 2015-05-18 18:55:25 +02:00
Alessio Morale
1e1195ec05 REVONANO - Add Eeprom support 2015-05-18 18:55:25 +02:00
Alessio Morale
764a15999f REVONANO - Make FlashFS_Logfs optional, remove old onchip eeprom files
Conflicts:
	flight/targets/boards/coptercontrol/firmware/Makefile
2015-05-18 18:55:21 +02:00
Alessio Morale
76ad80fdf5 Revert "objlist: remove now unused objlist flash filesystem"
Bring them back to the right path
This reverts commit d89a9b1b6c.
2015-05-18 18:54:52 +02:00
Alessio Morale
8a54414d70 REVONANO - Fix and cleanup hw configurations, Baro working at this stage 2015-05-18 18:54:52 +02:00
Alessio Morale
805750050c REVONANO - Support distinct remaps for SDA and SCL 2015-05-18 18:54:52 +02:00
Alessio Morale
375f23ff0c REVONANO - Make debuglog, FlashFS and other bits optional 2015-05-18 18:54:50 +02:00
Alessio Morale
690e04f4f0 REVONANO - Initial board support 2015-05-18 18:52:09 +02:00
Alessio Morale
6d6be75605 REVONANO - Update SPL to 1.3.0 2015-05-18 18:48:18 +02:00
Alessio Morale
b59408863a REVONANO - Allows per board linker scripts 2015-05-18 18:48:17 +02:00
Laurent Lalanne
3eef68c017 OP-1893 Deadband scale 2015-05-18 16:45:13 +02:00
Alessio Morale
330b396a73 Merge remote-tracking branch 'origin/amorale/OP-1874_notifications_improvements' into HEAD 2015-05-18 10:05:56 +02:00
abeck70
7d603bc6cb OP-1847 gpsassist fix
Set assisted control state to HOLD when Brake controller transitions to HOLD.  This impacts throttle stick behavior as it is different during braking and on brake completion in the hold state.
Also cleanuped and removed unused/old code that triggered HOLD in plans.c
2015-05-16 20:33:03 +10:00
abeck70
5d923c4125 Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into abeck/OP-1847-gps-assist-fixes 2015-05-16 19:57:41 +10:00
Alex Beck
d6751172ae OP-1848 altvario fix simposix build 2015-05-14 20:34:32 +10:00
abeck70
2c3fcd64d1 Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into laurent/OP-1869_Analog_airspeed_scaling 2015-05-14 20:21:40 +10:00
abeck70
f4d1fc13ec OP-1847 gps assist fixes
1. Update vtol vertical pids
2. Reduce deadband on throttle in gpsassist auto throttle to avoid large deviations in throttle change from neutral
3. Reinitialise assisted control state on mode change where the flight is the same but only gpsassist is going from disabled to enabled or enabled to disabled.
2015-05-14 20:07:07 +10:00
Laurent Lalanne
8e8d08c4a1 OP-1869 "scale" lower case 2015-05-13 21:55:18 +02:00
Steve Evans
1771d347bb Merge branch 'steve/OP-1803_s.bus_dropped_frames' into steve/OP-1849_flexio_com_bridge 2015-05-13 20:36:06 +01:00
Steve Evans
fd00cd8210 Merge branch 'next' into steve/OP-1803_s.bus_dropped_frames 2015-05-13 20:29:54 +01:00
abeck70
525aabe54c uncrustify flight gps updates 2015-05-13 17:36:52 +10:00
abeck70
3784357a18 Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into abeck/OP-1848r-altvario 2015-05-13 17:33:11 +10:00
abeck70
92e50c2ead OP-1810 FOC
Squashed commit for clean commit as discussed in code review
Uncrustify
2015-05-13 17:19:51 +10:00
abeck70
858354391d Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into abeck/OP-1848r-altvario 2015-05-12 22:07:21 +10:00
abeck70
794605b3d9 OP-1848 altvario fixes
1. CC compile fix
2. on reinit calculate a new thrustdemand after which gyro updates will retrigger subsequent calcs
2015-05-12 22:02:03 +10:00
abeck70
8d2f4722d7 OP-1848 altvario improvements
1. Disable velocity pid loop when altvario is not active
2. Add sanity boundf to ensure max min are inforced.
2015-05-12 17:40:28 +10:00
Cliff Geerdes
f1ec9dea33 Merge branch 'next' into theothercliff/OP-1840_GPS_serial_port_needed_features 2015-05-12 01:25:45 -04:00
abeck70
43ec464737 OP-1848 altvario improvements
1. Avoid neutral thrust calcs in altvario typically used in forward flight
2. Capture stick state for debugging into altitudeholdstatus
2015-05-10 19:05:36 +10:00
abeck70
0ef6779701 OP-1848 altvario tidyup of NE controllers in pathfollower
Change ILimit variable name to Beta in multiple PID loops that now use pid2 implementation.
Change velocity controller yaw from axislock to rate.
2015-05-09 23:03:53 +10:00
abeck70
2eef3e2dd2 OP-1848 altvario discovery4bare remove second instance of uavo 2015-05-09 14:54:40 +10:00
abeck70
d6123c018d Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into abeck/OP-1848r-altvario 2015-05-09 14:31:57 +10:00
abeck70
7fd08ef990 OP-1858 takeoff in nav address code review comments 2015-05-08 22:04:44 +10:00
abeck70
4ccdc46311 Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into abeck/OP-1858-autotakeoff 2015-05-08 21:48:34 +10:00
Steve Evans
6e6b8c8bad Merge branch 'steve/OP-1803_s.bus_dropped_frames' into steve/OP-1849_flexio_com_bridge 2015-05-08 07:43:16 +01:00
Steve Evans
023f157ba8 OP-1803 Disable untested DSM link quality code 2015-05-08 07:42:32 +01:00
Steve Evans
8689b2d0ca OP-1803 Don't report error codes as % 2015-05-08 07:38:55 +01:00
abeck70
ddefd11b7f Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into abeck/OP-1848r-altvario 2015-05-07 11:28:24 +10:00
Cliff Geerdes
193911ba20 OP-1840 another merge conflict 2015-05-05 23:26:08 -04:00
abeck70
143f09d216 Merge remote-tracking branch 'origin/rel-15.02.02' into next
Conflicts:
	flight/modules/Actuator/actuator.c
2015-05-06 08:35:21 +10:00
Cliff Geerdes
d9ab9e4f27 Merge branch 'next' into theothercliff/OP-1840_GPS_serial_port_needed_features
Conflicts:
	flight/modules/GPS/GPS.c
2015-05-05 17:05:11 -04:00
abeck70
593cf18c5c OP-1848 altvario Update dT to speed on sensor update rate 2015-05-05 22:49:39 +10:00
abeck70
0c77d8a21d OP-1848 altvario
Speed up velocity control loop to original speed
2015-05-05 22:39:15 +10:00
abeck70
72b0d053ef Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into abeck/OP-1858-autotakeoff 2015-05-05 21:53:26 +10:00
abeck70
dd1c6c7600 OP-1848 build fixes after merge with ratetrainer 2015-05-05 21:52:04 +10:00
abeck70
43d193cceb OP-1848 altvario merge fixes with ratetrainer 2015-05-05 21:48:04 +10:00
abeck70
5bffc73b17 Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into abeck/OP-1848r-altvario
Conflicts:
	flight/modules/Stabilization/outerloop.c
2015-05-05 21:47:19 +10:00
abeck70
0bdec71020 Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into abeck/OP-1867-pathplanner-autoland 2015-05-05 21:34:26 +10:00
abeck70
5c13db221b OP-1867 autoland/takeoff
Allow takeoff after land on abort when in takeoff flight mode without having to change flight mode.
2015-05-04 21:48:24 +10:00
abeck70
16cc9f1512 Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into abeck/OP-1858-autotakeoff 2015-05-04 21:15:24 +10:00
abeck70
5ca9d979e6 OP-1858 if previous mode was autotakeoff, ignore wp start position and go from current position. 2015-05-04 21:14:54 +10:00
abeck70
2ec40072ab OP-1863 ratetrainer fix coding error. ratetrainer should now work. 2015-05-04 17:36:04 +10:00
abeck70
c3c80d4aa8 OP-1848 altvario fix build issue for CC 2015-05-04 08:58:07 +10:00
abeck70
a9ad3c5ec1 Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into abeck/OP-1848r-altvario 2015-05-04 08:42:54 +10:00
abeck70
d4561e9cd8 Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into abeck/OP-1863-rate-maxpitch 2015-05-04 08:41:12 +10:00
abeck70
ca03092fb4 OP-1863 ratetrainer update stab handler to support new outerloop directwithlimits mode 2015-05-04 08:40:06 +10:00
Alessio Morale
9dcd6990d3 OP-1874 - Add notification for Critical alarms, add Attitude, modify alarm repetition rates.
reduce rate for Magnetometer, Receiver. Include Attitude.
2015-05-03 23:13:53 +02:00
Laurent Lalanne
842330922f Merge branch 'amorale/OP-1857_ppm_on_flexi_cc' into rel-15.02.02 2015-05-03 13:22:47 +02:00
Alessio Morale
c227686854 uncrustify 2015-05-02 20:27:28 +02:00
RS2K
2fca0b1d9b OP-1835 - Motor Constraints for 15.02.02 - Quick fix to disable clipping. Bit of code not in the original fix I had to deal with. 2015-05-02 13:11:40 -05:00
RS2K
57d062ff67 OP-1835 - Motor Constraints for 15.02.02
OP-1835 - Motor Constraints for 15.02.02
2015-05-02 12:55:43 -05:00
Philippe Renon
9a312ef115 uncrustified 2015-05-02 16:46:35 +02:00
Philippe Renon
b4b93bee93 Merge remote-tracking branch 'origin/rvonlehe/OP-1740_UAV0_GetSetFunctionsTakeEnum' into next 2015-05-02 16:34:15 +02:00
abeck70
b479bd5436 OP-1848 altvario TxPID support 2015-05-02 23:57:18 +10:00
abeck70
21c54c3a37 Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into abeck/OP-1848r-altvario 2015-05-01 22:59:36 +10:00
abeck70
b4d727db98 Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into abeck/OP-1863-rate-maxpitch 2015-05-01 21:53:35 +10:00
Laurent Lalanne
11e83bd0e8 OP-1869 Analog Airspeed sensor : Allow scale (voltage divider), change alpha/LowPassFilter behavior 2015-05-01 13:00:36 +02:00
m_thread
c4c60c897b Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into next 2015-05-01 09:53:35 +02:00
m_thread
b8653d44da Merge branch 'thread/OP-1837_SRXL_Cleanup' into next 2015-05-01 09:46:32 +02:00
Cliff Geerdes
dad8f40c4d OP-1840 Remove reference to unreleased hardware 2015-05-01 02:49:15 -04:00
Cliff Geerdes
c365bd3032 OP-1840 Removed unused debug .h and update comments 2015-05-01 02:46:38 -04:00
abeck70
87f521bde3 OP-1867 autoland
build fix
2015-04-30 23:11:32 +10:00
abeck70
0eb84cd8f6 OP-1867 pathplanner autoland
Setup land with descent rate set from flight mode settings.
2015-04-30 22:54:38 +10:00
abeck70
17b8ccd6bb Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into abeck/OP-1858-autotakeoff 2015-04-30 17:34:33 +10:00
Cliff Geerdes
f331ca0daf OP-1840 CC3D wouldn't build and update some comments 2015-04-30 01:27:19 -04:00
Cliff Geerdes
48bea16ab9 OP-1840 GPS serial improvements initial coding 2015-04-29 23:46:47 -04:00
Alessio Morale
82c0cba664 Merge remote-tracking branch 'origin/amorale/OP-1841_serial_telemetry_issue' into next 2015-04-29 19:45:11 +02:00
abeck70
d6de7803e1 OP-1858 autotakeoff pathplanner fixes 2015-04-29 20:27:30 +10:00
abeck70
09e2c6f00e OP-1863 RateTrainer
Initial commit for code review
2015-04-28 21:54:58 +10:00
abeck70
b14a966088 OP-1858 autotakeoff and pathplanner
1. Allow arming in pathplanner
2. Typo in comment
2015-04-28 20:54:44 +10:00
abeck70
210b15db4d OP-1858 autotakeoff in pathplanner
1. Allowing arming in pathplanner
2. Takeoff activation requires throttle to be above 30%
3. Takeoff occurs at the current/actual position and rises vertical to the settings altititude.
4. The details of the takeoff waypoint are effectively ignored - this is a simplicifcation to avoid having to have pathplanner inject a flyvector command from the current location to the waypoint
5. We hard code the condition check for autotakeoff as only one mode is supported.
2015-04-27 23:01:47 +10:00
samguns
09a00f8990 Merge branch 'rel-15.02.02' into samguns/zh_CN_GCS 2015-04-27 11:56:25 +08:00
m_thread
1f7a8d7ef1 OP-1837 Fixed a wrongly named config. 2015-04-27 01:05:47 +02:00
Richard von Lehe
d22b96d24b OP-1740: Force latest Pathfollower changes to use uavobj enums. 2015-04-26 17:46:49 -05:00
Richard von Lehe
f3611591e0 Merge branch 'next' into rvonlehe/OP-1740_UAV0_GetSetFunctionsTakeEnum
Conflicts:
	flight/modules/PathFollower/inc/vtollandcontroller.h
	flight/modules/PathFollower/vtollandcontroller.cpp
	flight/modules/PathFollower/vtollandfsm.cpp
2015-04-26 17:45:36 -05:00
Steve Evans
5c5c8b5947 OP-1849 Uncrustify 2015-04-26 21:45:43 +01:00
m_thread
8d4fe80388 OP-1837 Uncrustify 2015-04-26 21:08:54 +02:00
Steve Evans
e89356deb2 OP-1849 Invert DTR and initialise 2015-04-26 14:18:40 +01:00
m_thread
b0b1a42aec OP-1837 This change adds support for the Multiplex SRXL v1 and v2 protocols.
Protocol version is autodetected and 12 or 16 channels are supported.
SRXL is available on Flexiport of Revolution board.
2015-04-26 15:04:52 +02:00
m_thread
f11285ea16 Added new helper macros to performance counters. 2015-04-26 14:33:25 +02:00
Steve Evans
25b0b3df0f OP-1849 For Revo put DTR on pin 9 of FlexIO port 2015-04-26 11:26:04 +01:00
Steve Evans
7445add280 OP-1849 Hooks all in place for CDC line state changes to drive port GPIO for DTR 2015-04-26 03:05:47 +01:00
Alessio Morale
6d9bb8a287 OP-1857 - Enable PPM On Flexi Port 2015-04-25 20:21:56 +02:00
Steve Evans
0aede91547 Merge branch 'next' into steve/OP-1849_update_minimosd_via_usb 2015-04-24 22:49:02 +01:00
Steve Evans
7f93340f7f OP-1849 Initial commit 2015-04-24 22:46:07 +01:00
abeck70
e36ab50040 OP-1838 altvario
Fixes and tidyup.

TODO:
1. Fix UI for sliders
2. Disable vtol tuning on stabi input
3. Altitude loss feedback
2015-04-23 22:49:12 +10:00
abeck70
443b3742cc OP-1848 altvario
1. Build fixes
2. Additional UI components.
2015-04-23 21:54:20 +10:00
abeck70
0d77cd95d9 OP-1848 altvari0
1. build fixes
2. Updated ui to use updated uavo names in altitude settings that align to the naming in vtol settings
3. Moved call the thrust altvario to pre application of PIDs for 3d axes to allow for later coupling.
2015-04-23 21:13:00 +10:00
abeck70
d469a754bf OP-1848 ready for review
AltVario:
1. Uses new PID scheme
2. Runs at the outer loop rate to save CPU cycles
2015-04-23 15:51:09 +10:00
abeck70
955f314541 OP-1848 altvario rewrite - initial checkin
TODO: 1) update uavos 2) check dT
2015-04-23 15:46:47 +10:00
James Duley
00818f3161 OP-1851 Missing static keyword:
Added static to header functions that were missing it
2015-04-22 11:27:47 +12:00
Steve Evans
79339d677f Merge branch 'steve/OP-1803_s.bus_dropped_frames' into steve/OP-1849_update_minimosd_via_usb 2015-04-21 07:44:50 +01:00
Steve Evans
d28831008f OP-1803 Return link quality of zero rather than throw an exception if no receiver if the receiver port is undefined 2015-04-20 21:40:42 +01:00
Alessio Morale
ab36dcbdee Merge remote-tracking branch 'origin/rel-15.02.02' into next 2015-04-20 14:54:07 +02:00
Alessio Morale
1162c0afb2 Merge remote-tracking branch 'origin/master' into next 2015-04-20 14:53:13 +02:00
Alessio Morale
6176f7a1d7 Uncrustify 2015-04-20 14:52:13 +02:00
Alessio Morale
2571db4d96 Merge remote-tracking branch 'origin/laurent/OP-1814_Battery_reset_mAh' into next 2015-04-20 14:29:16 +02:00
Alessio Morale
19bb4d8016 Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into next 2015-04-20 12:10:31 +02:00
Alessio Morale
118a0ec66f Merge remote-tracking branch 'origin/amorale/OP-1802_throttle_fake_pos_vel' into next 2015-04-20 12:10:08 +02:00
abeck70
f68e1144ca OP-1760 fix compile issue for CC 2015-04-20 20:09:27 +10:00
Alessio Morale
061ef1e377 Merge remote-tracking branch 'origin/amorale/OP-1828_optional_analog_inputs' into next 2015-04-20 12:08:34 +02:00
Alessio Morale
9103b4de92 Merge remote-tracking branch 'origin/rodney/OP-1834_disable_piro_comp_in_self_level_modes' into next 2015-04-20 11:58:51 +02:00
Alessio Morale
107f807c92 Merge remote-tracking branch 'origin/rodney/OP-1794_dump_axis_lock_accumulators_on_low_throttle' into next 2015-04-20 11:52:35 +02:00
Alessio Morale
e12a595826 OP-1802 - (missing) change from review 2015-04-20 11:38:38 +02:00
Alessio Morale
6c22ed3b69 OP-1802 - Changes from review 2015-04-20 11:35:40 +02:00
Alessio Morale
3128127392 OP-1841 - Check available size at each step to avoid overrun 2015-04-20 05:48:39 +02:00
abeck70
d943f5a0ce OP-1760 autotakeoff
On landing stausvtolland state of DISARMED, armhandler  now detects this and disarms by force equivalent to a pathplanner alarm trigger.

To re-arm, one must leave the land flight mode.
2015-04-20 08:43:57 +10:00
Steve Evans
b87a1c1fa6 OP-1803 Enable DSM link quality so testers have something to work with 2015-04-19 18:41:04 +01:00
abeck70
3a0c36f7d7 OP-1760 autotakeoff
Add sanity checks to protect from waypoint looping inpath planner.

If takeoff initiated and thrust > vtol_min, enter position hold, reflect copletion in pathstatus, and pathplanner will move to next waypoint in a very short period of time.
2015-04-19 18:46:40 +10:00
abeck70
b96379cf78 OP-1760 landing fixes : avoid false positives on ground detection from accel vibration
Viper found that a badly mounted FC can trigger ground detection.
2015-04-19 18:18:14 +10:00
abeck70
1e9bd43871 Merge branch 'next' into abeck/OP-1760-autotakeoff-squashed 2015-04-19 17:52:35 +10:00
Alessio Morale
5c76c0ee07 Merge remote-tracking branch 'origin/steve/OP-1289_two_telemetry_streams' into next
Conflicts:
	flight/modules/Telemetry/telemetry.c
2015-04-18 19:10:13 +02:00
abeck70
c4aa17a04c OP-1760 autotakeoff pathplanner now uses pathstatus in conditionLegRemaining 2015-04-17 23:06:02 +10:00
abeck70
eebbfcea64 OP-1760 autotakeoff - enable positional control pathplanner landing to fly to final waypoint during landing 2015-04-17 22:58:53 +10:00
abeck70
88b0c99087 OP-1760 autotakeoff in pathplaner: control to start location instead of end location in NE 2015-04-17 22:44:05 +10:00
abeck70
55cbc2cd9b OP-1760 autotakeoff - simplify pathplanner data input requirements to trigger autotakeoff 2015-04-17 22:21:08 +10:00
abeck70
db0dc0e552 OP-1760 indicate completion of takeoff when disarmed
This can be detected in pathplanner.
2015-04-17 21:26:24 +10:00
Mathieu Rondonneau
9cb0926009 OP-1804: Add realloc. 2015-04-16 22:52:09 -07:00
abeck70
04c42bd316 OP-1760 autotakeoff
1. Make autotakeoff height configurable
2. Fix the pidcontroldown transfer to solve the rough transition between pid controllers for landing, takeoff, braking etc.
2015-04-16 21:22:37 +10:00
abeck70
a8c6a19784 OP-1760 code review fixes 2015-04-15 08:39:13 +10:00
Rodney Grainger
aa9ed6a62a OP-1843 - uncrustify 2015-04-14 22:00:11 +12:00
Rodney Grainger
115b206032 OP-1834 - Disable pirouette compensation in self level modes 2015-04-14 21:55:57 +12:00
Richard von Lehe
1ac4c63fa7 OP-1740: UAVObjects use enums 2015-04-12 22:05:05 -05:00
Rich von Lehe
782944bfb1 OP-1740: uavobj use enums: clean up errors 2015-04-12 16:20:09 -05:00
abeck70
a52969a76b OP-1760 Autotakeoff
Squashed commit as code reviews impossible otherwise due to dependencing on OP-1696
2015-04-12 21:39:31 +10:00
Rich von Lehe
e6de41855b OP-1740: GetSet use enums: Getting more files to conform to using enums instead of uint8_t... 2015-04-11 15:43:04 -05:00
Steve Evans
d2a69b2d44 OP-1803 Merge OP-1289 Only create local telemetry queues/tasks if needed 2015-04-11 13:32:45 +01:00
Steve Evans
32a25e7044 OP-1289 Only create local telemetry queues/tasks if needed 2015-04-11 12:58:14 +01:00
Richard von Lehe
b3a7a89dca OP-1740: GetSet functions take enum: Fix remaining compile errors in PathFollower and Airspeed modules. 2015-04-09 20:04:44 -05:00
Alessio Morale
4afd644018 OP-1828 - Revolution: Maps Servo 3-6 to ADC2-5 2015-04-10 01:16:59 +02:00
Richard von Lehe
4c5cebf5c6 OP-1740 UAV0 GetSet Functions Take Enum: getting codebase to compile - multiple changes needed, still incomplete (i.e. this commit will not compile, but I want to save my changes on more than just my machine :-) 2015-04-08 21:40:15 -05:00
Alessio Morale
6641bb0e21 OP-1828 - Add boards support 2015-04-09 00:26:04 +02:00
Alessio Morale
3a772e1828 OP-1828 - Add support for optional analog inputs
Optional analog inputs are not initialized at ADC module startup.
Calling PIOS_ADC_PinSetup(uint32_t pin) setups them as analog input at a later stage.
2015-04-09 00:25:53 +02:00
Alessio Morale
c452ecf180 OP-1820 - fix some now unneded mess in PiOS_Sensor 2015-04-05 16:10:10 +02:00
Rodney Grainger
e81e9c03cb OP-1794 - Uncrustify 2015-04-05 17:27:43 +12:00
Rodney Grainger
34401d645b OP-1794 Dump Axis Lock accumulators when throttle is low.
For multi-rotors, the system should prevent the wind up of the AxisLock accumulators when the throttle is low.
With the current firmware, a multi-rotor using Axis Lock will flip upon takeoff if the vehicle is moved, or left for a long period, prior to arming.
2015-04-05 16:41:58 +12:00
Steve Evans
73aeb5d653 OP-1803 Report link quality for OPLink 2015-04-04 22:02:54 +01:00
Laurent Lalanne
2350acb068 OP-1814 Add ResetConsumedEnergy option to flight side 2015-04-04 22:34:22 +02:00
Steve Evans
b93d9e178e OP-1803 Max signal quality is 100% 2015-04-04 14:50:08 +01:00
Alessio Morale
ee19ff893e OP-1820 - Add mag orientation parameter in hmc configuration 2015-04-03 20:40:52 +02:00
Steve Evans
b7122008c7 OP-1803 Uncrustify 2015-04-03 18:30:36 +01:00
Steve Evans
b5a3ad3708 OP-1803 Use float to avoid rounding error on signal quality 2015-04-03 18:01:04 +01:00
Steve Evans
32b3f0d55d OP-1803 Remove old header reference 2015-04-03 15:45:00 +01:00
Werner Backes
e42c6e4265 Fixed PathPlanner's 3D mode for the case of non-custom crafts. 2015-04-03 16:32:33 +02:00
Steve Evans
f9f0e1657c OP-1803 Add good frame count option for debug 2015-04-03 15:29:24 +01:00
Steve Evans
2843715432 Merge branch 'steve/OP-1289_two_telemetry_streams' into steve/OP-1803_s.bus_dropped_frames
Update with taskinfo update
2015-04-03 12:46:12 +01:00
Steve Evans
91e03a1541 OP-1289 Adding tracking of new RadioTx task 2015-04-03 12:37:37 +01:00
Steve Evans
8276aa3a66 OP-1803 Monitor signal quality when armed too 2015-04-03 09:47:07 +01:00
Steve Evans
2e5ecd2dce OP-1803 S.Bus signal quality monitoring 2015-04-02 21:41:40 +01:00
Steve Evans
a0f180d393 OP-1803 Initial commit 2015-04-02 19:09:58 +01:00
Alessio Morale
be4bc23da4 OP-1812 - Fix the failsafe issue with PWM inputs 2015-04-01 20:36:10 +02:00
Werner Backes
93630b30df Fixed calls to path_circle. 2015-03-28 13:42:31 +01:00
m_thread
4bd2e889ce Merge remote-tracking branch 'origin/samguns/OP-1781_ground_input_channel_conf' into next 2015-03-28 12:33:24 +01:00
samguns
2d9f3acc17 OP-1781 Fix the problem that while calibrating transmitter, the graphic stick doesn't move accordingly. 2015-03-23 23:05:07 +08:00
Alessio Morale
006fdf9072 Uncrustify 2015-03-22 20:26:36 +01:00
Alessio Morale
fbaf39229b Merge remote-tracking branch 'origin/cyr/OP-1739_GNSS' into next 2015-03-22 20:25:51 +01:00
Alessio Morale
4962936c76 Merge remote-tracking branch 'origin/cyr/OP-1691_RFM22B_reset_cpuhog' into next 2015-03-22 20:24:37 +01:00
Alessio Morale
1da57315d3 OP-1802 - Throttle fake pos/vel in filterstationary 2015-03-22 13:24:42 +01:00
Alessio Morale
2a45f58fea Merge remote-tracking branch 'origin/amorale/OP-1793_sensor_fixes' into next 2015-03-20 22:43:33 +01:00
Alessio Morale
59325f6292 Merge remote-tracking branch 'origin/amorale/OP-1750_perf_optimization' into next 2015-03-20 22:43:11 +01:00
Alessio Morale
ddd72324c3 OP-1793 - Use a constant for running average smoothing factor 2015-03-20 22:11:29 +01:00
Alessio Morale
0d1b3ffb3d OP-1750 - don't reuse invBmag, calculate mag magnitude only if mag samples are provided 2015-03-20 21:45:50 +01:00
abeck70
a4ea1f008b OP-1696 uncrustify 2015-03-20 21:44:24 +11:00
abeck70
88494e2745 OP-1696 PathFollower rewrite in C++ and Landing Squashed commit of the following:
commit 580cd8addafadc3109b90b1fd183130ea8add7f2
Author: abeck70 <abeck70@icloud.com>
Date:   Fri Mar 20 21:32:33 2015 +1100

    OP-1696 Cleanup and bug fix

    1. Code review cleanup
    2. Fixed gps assist braking - the thrust limits in piddown were not being set.

commit 31ac4494f6e2bc5859f49d1f76f19fe3a4d32862
Author: abeck70 <abeck70@icloud.com>
Date:   Wed Mar 18 08:31:16 2015 +1100

    OP-1696 fix initialisation of down pid control parameters

commit a7bd737459249530bde9546b8247dd45b40dced4
Author: abeck70 <abeck70@icloud.com>
Date:   Tue Mar 17 21:18:38 2015 +1100

    OP-1769 Actuator fix from code review

commit 968172b8fb46c91b2611be4825e17faf2fa13411
Author: abeck70 <abeck70@icloud.com>
Date:   Tue Mar 17 21:01:11 2015 +1100

    OP-1696 fixed ground pathfollower settings xml

commit 721c07b67a87911ed67d0b62aa658cfac6d3eb97
Merge: f556215 be9f4ae
Author: abeck70 <abeck70@icloud.com>
Date:   Tue Mar 17 20:52:01 2015 +1100

    Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into abeck/OP-1696

commit f556215ddbd5a29b22c2e6124372d74a0d6b9a0f
Author: abeck70 <abeck70@icloud.com>
Date:   Tue Mar 17 20:51:22 2015 +1100

    OP-1696 ground pathfollower fixes

commit 4584b22d6a2d33d3efb1cd11ac46804a5623a236
Author: abeck70 <abeck70@icloud.com>
Date:   Tue Mar 17 18:11:52 2015 +1100

    OP-1696 Ground redesign

    1. Move to new PID loop design
    2. Prototype steering control

commit b70c3373646fa758ae30a59765b8a56df7d2fbeb
Author: abeck70 <abeck70@icloud.com>
Date:   Sun Mar 15 18:42:06 2015 +1100

    OP-1696 ground pathfollower added missing call to update velocity state

commit a282bfb14dffcd486466b60be3100d26c11649ef
Author: abeck70 <abeck70@icloud.com>
Date:   Sun Mar 15 17:22:02 2015 +1100

    OP-1696 ground pathfollower improvements

commit f56ea4f9b101415e32e4464e51e087ee350be969
Author: abeck70 <abeck70@icloud.com>
Date:   Sun Mar 15 07:44:01 2015 +1100

    OP-1696 remove unused PID controller in ground for vertical

commit 6424aa0a84c3718a5a7b51fab1c9e04587d325b8
Author: abeck70 <abeck70@icloud.com>
Date:   Sat Mar 14 21:40:58 2015 +1100

    OP-1696 Initialise vtolemergencyfallback variables

commit 5d6110499bb06fe9b397e09dea5aafe994f03d13
Author: abeck70 <abeck70@icloud.com>
Date:   Sat Mar 14 21:30:21 2015 +1100

    OP-1696 vtolflycontroller segv fixed and uncrustify

commit bef23ea3dc2b5aff5b9b8713802586719b8f68cf
Author: abeck70 <abeck70@icloud.com>
Date:   Sat Mar 14 20:50:05 2015 +1100

    OP-1783 PathPlanner

    Instead of config alarm if no pathplan, simply continue to alarm pathplan, but allow normal arming and flight in other modes.  If pathplan enabled, simply enter position hold.

commit 370f1747209cca7c01c071a43224ad83b04bdd55
Author: abeck70 <abeck70@icloud.com>
Date:   Sat Mar 14 20:48:22 2015 +1100

    OP-1769 Ground code review comment

    1. Remove idx1 < 0 check not needed
    2. Should return abs_input in the corner case that curve is "invalid".

commit 01973c656d783e035ad823c267d3387bf473eebe
Merge: be07d12 5c9b6fa
Author: abeck70 <abeck70@icloud.com>
Date:   Sat Mar 14 12:17:31 2015 +1100

    Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into abeck/OP-1696

commit be07d125f42b5ca1aabce0f5c0fcf592e8cddf98
Merge: 44afdc7 ad44b31
Author: abeck70 <abeck70@icloud.com>
Date:   Thu Mar 12 21:55:52 2015 +1100

    Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into abeck/OP-1696

commit 44afdc77987049dc58cdf42e3be88b7eae38de02
Author: abeck70 <abeck70@icloud.com>
Date:   Thu Mar 12 19:35:55 2015 +1100

    OP-1696 fix startup

    Fix initialisation and void use of pios_malloc at startup

commit 962f5f75756883cec6726c0347310d60264f6989
Author: abeck70 <abeck70@icloud.com>
Date:   Thu Mar 12 18:48:04 2015 +1100

    OP-1696 undo changes to make file

commit 7fa71d5c614d492cb4026312672068f92a4bcd3e
Merge: 672732e 5a9cfa6
Author: abeck70 <abeck70@icloud.com>
Date:   Thu Mar 12 18:06:59 2015 +1100

    Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into abeck/OP-1696

commit 672732e95d555946300ef5093f687f3fa88bfd3a
Author: abeck70 <abeck70@icloud.com>
Date:   Wed Mar 11 12:59:44 2015 +1100

    OP-1696 code review comments

commit 73b295d6515f2489b3b3a61459c975b0c37afe3d
Author: abeck70 <abeck70@icloud.com>
Date:   Wed Mar 11 12:47:24 2015 +1100

    OP-1696 code review comments

commit 524b72f537fe922bf3c4385b418872f13819a5cf
Merge: 6beef01 ba5f395
Author: abeck70 <abeck70@icloud.com>
Date:   Tue Mar 10 23:19:06 2015 +1100

    Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into abeck/OP-1696

commit 6beef01476d06598652a10de4857e6ae55015417
Merge: 100cf33 8c31f96
Author: abeck70 <abeck70@icloud.com>
Date:   Sat Mar 7 16:50:32 2015 +1100

    Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into abeck/OP-1696

commit 100cf335d187fe696d3678371b194fc3044a1c7e
Author: Alex Beck <abeck70@icloud.com>
Date:   Thu Mar 5 22:32:30 2015 +1100

    OP-1696 simposix c++ compilation fix

commit 9ebf846d1ec8fef30ffc1204546fc5dc648ec10b
Author: Alex Beck <abeck70@icloud.com>
Date:   Thu Mar 5 21:35:39 2015 +1100

    OP-1696 fix simposix c++ compile of pathfollower

commit a86b4b1db46dba569739587ee57b03460381ebab
Author: abeck70 <abeck70@icloud.com>
Date:   Thu Mar 5 18:03:51 2015 +1100

    OP-1696 resolve linux build issue

commit 1d7695f81293534bc17f69b0fcd9de3876867f6a
Author: abeck70 <abeck70@icloud.com>
Date:   Wed Mar 4 18:10:09 2015 +1100

    OP-1696 Return to Base & Land implemented

    Enabled via FlightModeSettings ReturnToBaseNextCommand = LAND

commit 4e5ca807b18a40ea60c05c1b46f738462595a6b2
Author: abeck70 <abeck70@icloud.com>
Date:   Wed Mar 4 16:38:06 2015 +1100

    OP-1696 reduce memory footprint by only allocating controllers required for a particular frame type

commit 78e8f559cd25ffaeac68b563e25d1ad357205fd6
Author: abeck70 <abeck70@icloud.com>
Date:   Wed Mar 4 13:51:05 2015 +1100

    OP-1696 move fsm initialisation to controller implementations

commit 848c78a84e5c7e11b2da953c9d9549b11fc5b1d8
Author: abeck70 <abeck70@icloud.com>
Date:   Wed Mar 4 13:27:11 2015 +1100

    OP-1696 reduce memory through re-use of pointers to data objects in base class.

commit bc8794601142055942910ba9f938c03c8a3ca547
Merge: 24bc3de 843325d
Author: abeck70 <abeck70@icloud.com>
Date:   Tue Mar 3 22:06:01 2015 +1100

    Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into abeck/OP-1696

commit 24bc3de6155a74850b17ca7706f6b592923e027c
Author: abeck70 <abeck70@icloud.com>
Date:   Tue Mar 3 17:56:12 2015 +1100

    OP-1696 update gcs path planner options to align to new modes

commit dc659891882ea0624a6436550425c54b347f4101
Author: abeck70 <abeck70@icloud.com>
Date:   Tue Mar 3 13:51:55 2015 +1100

    OP-1696 pathfollower class renaming and uncrustify

commit af19d114b8e0ff23159bdaca37e5f5bf1c1f8beb
Merge: b07c1fd 04f4cd9
Author: abeck70 <abeck70@icloud.com>
Date:   Mon Mar 2 21:47:12 2015 +1100

    Merge branch 'rel-15.02' of ssh://git.openpilot.org/OpenPilot into abeck/OP-1696

commit b07c1fdd0544a555678bc7a8510cd92861f17e46
Author: abeck70 <abeck70@icloud.com>
Date:   Mon Mar 2 21:27:27 2015 +1100

    OP-1696 remainder of changes to integrate drive and fly objectives

commit c824c53cf30889a468ecb25ae3d705fa011b23ba
Merge: b89751c 1102243
Author: abeck70 <abeck70@icloud.com>
Date:   Mon Mar 2 17:06:13 2015 +1100

    Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into abeck/OP-1696

commit b89751caa5d6dc06e1e20391aa4e12b5484056d4
Author: abeck70 <abeck70@icloud.com>
Date:   Mon Mar 2 17:04:27 2015 +1100

    OP-1696 merge fly and drive pathdesired/action objectives

commit c463132cb7da5cdf9fc5395ae0650b081bc9fb55
Author: abeck70 <abeck70@icloud.com>
Date:   Sun Mar 1 10:25:29 2015 +1100

    OP-1696 merge ground pathfollower and refactored into C++

    commit 6ed504b32f9e502e4f02d50b9e85ba91591417ba
    Merge: bcf245e deafed6
    Author: abeck70 <abeck70@icloud.com>
    Date:   Fri Feb 27 18:12:32 2015 +1100

        Merge branch 'next' into corvuscorax/OP-1642_tank-support

        Conflicts:
        	flight/modules/PathFollower/pathfollower.c
        	shared/uavobjectdefinition/vtolpathfollowersettings.xml

    commit bcf245e08c3348f2e6e5eddceee6d6cc268bdc23
    Author: Corvus Corax <corvuscorax@cybertrench.com>
    Date:   Sat Dec 6 19:45:29 2014 +0100

        OP-1642 added new uavobject to discovery target, too

    commit 6b9e8a7d7dad0739b4ffd2ce7f2f78ed4f597077
    Author: Corvus Corax <corvuscorax@cybertrench.com>
    Date:   Sat Dec 6 17:58:18 2014 +0100

        OP-1642 added very simple path control for ground vehicles

    commit e8d8440e049c06158e7fc542627fac6420abaf65
    Author: Corvus Corax <corvuscorax@cybertrench.com>
    Date:   Sat Dec 6 17:17:09 2014 +0100

        OP-1642 added new settings uavobject for tank path follower

commit 71dd726eb5b52614b417236c22e8a5cc3a487faf
Author: abeck70 <abeck70@icloud.com>
Date:   Fri Feb 27 18:05:10 2015 +1100

    OP-1696 align pathaction to pathdesired

commit 8a88af83be457aafbb63e4f94fad3b1cd54264ca
Author: abeck70 <abeck70@icloud.com>
Date:   Thu Feb 26 08:06:34 2015 +1100

    OP-1696 fixed wing control refactored and compiling

commit fd9850b5e5680f5b422dbc468a94c5ec4b6dd518
Author: abeck70 <abeck70@icloud.com>
Date:   Wed Feb 25 17:47:19 2015 +1100

    OP-1696 Removed vtol stuff from pathfollower.cpp after having replaced it with class impl

commit 9127d8d6d8c345c5bbf8622ce4e5eb76b03d1356
Merge: 4054c73 93fb2d5
Author: abeck70 <abeck70@icloud.com>
Date:   Wed Feb 25 13:09:06 2015 +1100

    Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into abeck/OP-1696

commit 4054c73ac98b54188a0a5367c5ca913b7fee6a89
Author: abeck70 <abeck70@icloud.com>
Date:   Tue Feb 24 12:29:28 2015 +1100

    OP-1696 fix compile errors

commit b398db3d4de8cd621a059da1f0dbb00868be0fb9
Merge: 94c795a 3e15cac
Author: abeck70 <abeck70@icloud.com>
Date:   Tue Feb 24 12:06:35 2015 +1100

    Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into abeck/OP-1696

commit 94c795af386cf0f1072a88e99a80cb1080bf85e7
Merge: d2115de 57e0a8b
Author: abeck70 <abeck70@icloud.com>
Date:   Mon Feb 23 17:54:33 2015 +1100

    Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into abeck/OP-1696

    Conflicts:
    	flight/modules/Sensors/sensors.c
    	make/common-defs.mk

commit d2115dee4e8e9b6a02f7b7700e4715480a56b18f
Author: abeck70 <abeck70@icloud.com>
Date:   Mon Feb 23 14:35:02 2015 +1100

    OP-1696 preliminary checkin for refactor of fly

    TODO:
    1. Finalise and test fly, brake
    2. Remove patfhollower vtol fly
    3. Rename all objects adding vtol in name

commit 95804b1d591d194cce3596187c74cdb2dd0d192f
Merge: 58cebb0 31c1385
Author: abeck70 <abeck70@icloud.com>
Date:   Sat Feb 21 22:10:03 2015 +1100

    Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into abeck/OP-1696

commit 58cebb0658deaece1555cfa24e50f1b86fd68c96
Author: abeck70 <abeck70@icloud.com>
Date:   Sat Feb 21 22:09:29 2015 +1100

    OP-1696 refactor neutral thrust and add pos hold implementation

commit 2c3cadfef3de9e092bd66bbabc58ac7847aca7e4
Author: abeck70 <abeck70@icloud.com>
Date:   Fri Feb 20 18:32:11 2015 +1100

    OP-1696 start of refactor of braking

commit 991c2124e834f3432f5e34c5c9f4966cb42a7be3
Merge: 1ab5798 db7d605
Author: abeck70 <abeck70@icloud.com>
Date:   Thu Feb 19 12:17:54 2015 +1100

    Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into abeck/OP-1696

commit 1ab579865f04aeaa5899f5065a983de29074e025
Author: abeck70 <abeck70@icloud.com>
Date:   Wed Feb 18 21:29:01 2015 +1100

    OP-1696 Rewrote velocity roam into new C++ OO architecture

    With use of new PID controller for NE.

commit 03edb049f06bf60054dce36a5b8b301a397284c4
Author: abeck70 <abeck70@icloud.com>
Date:   Wed Feb 18 12:19:17 2015 +1100

    OP-1696 Start of refactoring of VelocityRoam implementation in PathFollower

    Also TODOs:
    1. To support pathplanner, remove all references to FlightStatus object and add more fields to PathDesired
    2. Refactor Braking to use C++
    3. Test and optimise Velocity Roam
    4. Add more config options to Landing. For example disable disarming. And add more setting objects.
    5. Consider moving all landing settings to one object.

commit 1f5dba821d4535a9a14f333efdeec1af5afcc281
Author: abeck70 <abeck70@icloud.com>
Date:   Mon Feb 16 22:51:31 2015 +1100

    OP-1696 Landing tuning

commit 5133956c717fba871dd5700333806e298038a3d0
Author: abeck70 <abeck70@icloud.com>
Date:   Mon Feb 16 21:05:06 2015 +1100

    OP-1696 Landing

    Multiple fixes

commit cf22055ecb8eb7304174c730f249a2332ebc599b
Author: abeck70 <abeck70@icloud.com>
Date:   Sun Feb 15 20:52:29 2015 +1100

    OP-1696 Add PIDStatus debug object

commit bc13d732601e7c7cb48db17f1a75b33cc96c0c34
Author: abeck70 <abeck70@icloud.com>
Date:   Sat Feb 14 15:53:16 2015 +1100

    OP-1696 Landing sanity tested

commit 6e913076c1dfcb8b90153e9eca8acf6c9e51f293
Author: abeck70 <abeck70@icloud.com>
Date:   Sat Feb 14 11:16:06 2015 +1100

    OP-1696 completed refactoring

    1. Completed refactoring of NE and Thrust control
    2. Fixed velocity roam

    TODO Tuning and testing

commit 63b62fbd0ac105029e54163b98c3beebc2d73c3a
Author: abeck70 <abeck70@icloud.com>
Date:   Fri Feb 13 08:54:23 2015 +1100

    OP-1696 New PID Controller and refactoring of PID implementation for thrust management

commit 7474331529477d0badd2ef0d609c84c556be9cec
Author: abeck70 <abeck70@icloud.com>
Date:   Tue Feb 10 16:39:44 2015 +1100

    OP-1696 Landing Refactor Thrust PID Loop for landing

commit 904ab2a9241e40c19da6a1508b4ce5243c75d7a3
Author: abeck70 <abeck70@icloud.com>
Date:   Mon Feb 9 22:13:39 2015 +1100

    OP-1696 Uncrustify

commit b3d30e298d8a0343782a29bc91be6677105b325e
Author: abeck70 <abeck70@icloud.com>
Date:   Mon Feb 9 22:05:05 2015 +1100

    OP-1696 Create new OO design

    Added PathFollowerControl which has an Landing implementation.  The landing implementation runs its own set of PIDs.  And interfaces to the FSM for Landing.

commit 1ffd8d67cf7310c1c18c90f3ba18b08221d185a3
Author: abeck70 <abeck70@icloud.com>
Date:   Sat Feb 7 18:04:42 2015 +1100

    OP-1696 Upgrade arm tools

commit 3df01f97021d13694027b92ba0b13cc9fe70d437
Author: abeck70 <abeck70@icloud.com>
Date:   Fri Feb 6 21:52:38 2015 +1100

    OP-1696 Landing uncrustify and start of refactoring landing to make more use of FSMLand

commit 7a753b65fb69d52c89875b9a182ef5210ee8ef2d
Author: abeck70 <abeck70@icloud.com>
Date:   Fri Feb 6 15:08:29 2015 +1100

    OP-1696 Landing: fix compilation of all exes

commit 692459874acf2b7ae07aa3ab88a2c78a09f26ee6
Author: abeck70 <abeck70@icloud.com>
Date:   Fri Feb 6 14:45:06 2015 +1100

    OP-1696 Landing startup fixes

commit 9851f29b9238a969efd0110f01a4fad6bdbc5a5d
Author: abeck70 <abeck70@icloud.com>
Date:   Fri Feb 6 10:21:52 2015 +1100

    OP-1696 Landing pathfollower CPP refactoring

commit 9b3a54d41f14f07cd0d78426026d12ae9ac4e5b5
Author: abeck70 <abeck70@icloud.com>
Date:   Wed Feb 4 13:02:44 2015 +1100

    OP-1696 Moved to FSMLand class and fixed CPP problems

    1. Additional methods, compile options, and need to have main as a cpp to solve various link issues when using static constructors but to avoid adding unnecessary libs.

commit 7ebe739bfdb4e0f598f4408c1488f01bc033c044
Author: abeck70 <abeck70@icloud.com>
Date:   Tue Feb 3 22:17:08 2015 +1100

    OP-1696 Initial Landing prototype

    Proof of concept. To be refactored into C++

commit 11d6754b9766efb76cc1cd57e9894badaf33ef2d
Author: abeck70 <abeck70@icloud.com>
Date:   Tue Feb 3 22:13:10 2015 +1100

    OP-1696 CPP Enablement

    revo c++
    Enable optional revo C++ support:
    1. Set USE_CXX to enable compliation and linkage of C++ source code
    2. Disables rtti and exceptions
    3. operator new and delete call pios malloc/free
    4. Static constructor invocation supported
2015-03-20 21:42:20 +11:00
Alessio Morale
bcffde5465 OP-1793 - Filter temperature to reduce the noise injected into pressure measuremenent. 2015-03-18 05:29:39 +01:00
Alessio Morale
8eaf7f9918 OP-1793 - Fix enabling condition for baro temp correction 2015-03-18 04:44:02 +01:00
Alessio Morale
a6b43ecef0 OP-1793 - Apply accel bias before scaling 2015-03-18 04:43:30 +01:00
Steve Evans
ba217a3d7d OP-1289 Revise naming of mainQueue to queue
As per review comments

+review OPReview-985
2015-03-17 20:52:08 +00:00
Steve Evans
45005a167f OP-1289 Revise naming of the two channels of data and associated functions
The code now uses a "local" prefix to refer to the telemetry channel
associated with a port on the FC and a "radio" prefix to refer to the
telemetry channel associated with the OPLink/USB.

+review OPReview-985
2015-03-15 23:11:42 +00:00
Steve Evans
12d3bdbe8a OP-1289 add per channel port selection routines
+review OPReview-985
2015-03-15 18:19:19 +00:00
Alessio Morale
4e9d092b03 OP-1776 - Disable radioRx task if radio is not enabled, fix for comments 2015-03-15 16:26:56 +01:00
Alessio Morale
7c9f6c0ed5 OP-1776 - Missing change from review 2015-03-15 14:36:23 +01:00
Steve Evans
5952cfa275 Year is 2015 2015-03-15 00:48:36 +00:00
Steve Evans
6bb732fb02 OP-1289 Need Revo to send two telemetry streams for OSD and GCS 2015-03-14 23:58:18 +00:00
Alessio Morale
bb0e03e387 OP-1776 - Further cleanup/optimization for ProcessTelemetryStream* functions 2015-03-14 14:39:02 +01:00
Alessio Morale
a418ca349f OP-1776 - Fixes from review 2015-03-14 13:46:08 +01:00
abeck70
5c9b6fac29 OP-1769 uncrustify 2015-03-14 12:15:59 +11:00
abeck70
5e7a3c30e1 OP-1769 ground actuator
code review comment addressed to reduce code size
2015-03-14 12:01:30 +11:00