James Cotton
96afe7cffd
Merge remote-tracking branch 'origin/stac/add-debug-consoles' into next
2012-10-12 08:07:44 -05:00
James Cotton
d0ee515daf
Merge remote-tracking branch 'origin/kenz/coax_heli' into next
2012-10-12 08:06:13 -05:00
Stacey Sheldon
f0e0c2e79e
console: add debug console via USB CDC/VCP interface
...
The USB VCP Port has a new DebugConsole setting that
routes all output destined for PIOS_COM_DEBUG to the
emulated serial port.
To enable this in your build, you'll have to build like:
- make fw_coptercontrol_clean
- make fw_coptercontrol ENABLE_DEBUG_CONSOLE=YES
You can then output formatted text to the console
like this:
#if defined(PIOS_INCLUDE_DEBUG_CONSOLE)
PIOS_COM_SendFormattedString(PIOS_COM_DEBUG,
"foo is %u\r\n",
foo);
#endif /* PIOS_INCLUDE_DEBUG_CONSOLE */
Please ensure that all of your debug output is
wrapped with these macros so that your debug
code doesn't bloat the firmware image.
2012-10-11 00:51:09 -04:00
Stacey Sheldon
6088c05946
console: add support for serial debug consoles
...
Serial ports now have a new HW setting called DebugConsole
which can be used to dump internal state to a serial port
for debug.
To enable this feature, you need to:
- make fw_coptercontrol_clean
- make fw_coptercontrol ENABLE_DEBUG_CONSOLE=YES
- configure one of the serial ports as DebugConsole in the GCS
- save settings
- power-cycle your board
Things to note:
- The console is at 57600,8N1.
- This is not currently configurable via the GCS.
- You can only have a single console enabled at a time.
2012-10-11 00:22:07 -04:00
Laura Sebesta
22d7c8947e
Removed extraneous comments.
2012-10-07 08:50:24 +02:00
Fredrik Arvidsson
2af2a732fb
Complete set of new icons.
2012-10-06 16:12:15 +02:00
Fredrik Arvidsson
08be8f5e8f
Merge branch 'next' into thread/config_art
2012-10-06 10:45:08 +02:00
Fredrik Arvidsson
ffe6c0bcb5
Added icons and updated some other code.
2012-10-06 10:42:57 +02:00
Fredrik Arvidsson
eb35ba4cbb
Added even more new icons.
2012-10-05 18:16:04 +02:00
Fredrik Arvidsson
a57435f183
Added more new icons.
2012-10-05 16:24:56 +02:00
James Cotton
2191befe17
Merge remote-tracking branch 'revo/brian/rfm22_rf2' into revo
...
Conflicts:
flight/PiOS/Common/pios_rfm22b.c
2012-10-05 08:20:35 -05:00
Fredrik Arvidsson
d765ac01d5
Added new icons and fixed icon states when selected/highlighted.
2012-10-05 14:30:37 +02:00
Fredrik Arvidsson
28afadf8b9
Added first icons and started to fix with icon states.
2012-10-05 08:16:26 +02:00
Brian Webb
5724fa083c
RFM22B: Added link quality calculation based on number of dropped packets. Also added packet error correction, which apparently wasn't being done before.
2012-10-04 21:11:40 -07:00
chris pember
a536f74722
temp fix for the sizing of the multi page that will allow folks on tiny screens to have a uavo browser if they want
2012-10-05 13:25:49 +10:00
James Cotton
99a0eeae3d
Merge commit 'e89ae3389d95603fccdcda535ab6cbed97099851' into revo
2012-10-04 16:38:26 -05:00
James Cotton
13cabd2ea4
Merge branch 'next' into revo
...
Conflicts:
flight/PiOS/Common/pios_rfm22b.c
2012-10-04 16:38:08 -05:00
chris pember
e89ae3389d
temp fix for the sizing of the multi page that will allow folks on tiny screens to have a uavo browser if they want
2012-10-03 23:46:46 -07:00
Fredrik Arvidsson
a47687cff8
OP-39 Added correct dependencies to SetupWizard plugin specification.
...
Renamed FlashPage to FlashDance, eeh, no SavePage :)
Removed unnecessary dependency in setupwizard.pro
Fixed a bug with the Next button on the first page.
Fixed a bug with the cancel button on the last page.
2012-10-02 23:17:56 +02:00
Fredrik Arvidsson
13f10949e8
OP-39 Removed an unnecessary struct declaration. Changed some texts. Removed some empty lines.
2012-10-01 21:50:00 +02:00
Fredrik Arvidsson
138848453f
OP-39 Changed the Radio Setup Wizard to go to the Arming Settings screen after the last step in the wizard. Changed the info text in a dialog.
2012-09-30 17:27:20 +02:00
Fredrik Arvidsson
ede0c2ebf9
OP-39 Small adjustment.
2012-09-30 14:24:54 +02:00
Fredrik Arvidsson
949569fdec
OP-39 Added handling of switching to correct tab in input configuration section when starting Radio Setup Wizard.
2012-09-30 14:19:31 +02:00
Fredrik Arvidsson
3b9e50ad51
Merge branch 'next' into thread/OP-39
2012-09-29 09:43:50 +02:00
Stacey Sheldon
9896a0d416
Merge remote-tracking branch 'op-public/next' into revo-next
...
Conflicts:
ground/openpilotgcs/src/libs/utils/homelocationutil.cpp
ground/openpilotgcs/src/libs/utils/homelocationutil.h
ground/openpilotgcs/src/plugins/uavobjectutil/uavobjectutilmanager.cpp
shared/uavobjectdefinition/taskinfo.xml
2012-09-27 22:42:44 -04:00
James Cotton
26408e286f
GCS Stabilization: Force the apply button to always be there as I can't find expert mode
2012-09-26 09:49:33 -05:00
James Cotton
0fa4b062a4
Merge branch 'next' into revo
2012-09-26 00:43:02 -05:00
chris pember
b09041cb9f
moved the autotune checkbox up top like the other modules
2012-09-25 00:16:31 -07:00
chris pember
b4ac6a0b86
couple little tweaks, is perfect on linux and windows, close enough on osx
2012-09-24 23:46:34 -07:00
chris pember
36f830e4d3
couple little tweaks, ys, this is endless
2012-09-24 23:28:43 -07:00
chris pember
fc55a52ff4
merged kens branches, changed the wording a little on the pre-autotune page, just need someone to look at one small bit of oddness with the save and apply buttons on autotune page
2012-09-24 21:41:41 -07:00
chris pember
086232406d
Merge branch 'kenz/extraGUIchanges' of ssh://git.openpilot.org/OpenPilot into cp/extraGUIchanges
2012-09-24 20:26:04 -07:00
Laura Sebesta
2caf635acd
A couple artwork fixes for reversed motors.
2012-09-24 22:36:39 +02:00
Laura Sebesta
9d5d67a45a
Added swapping of artwork when multirotor direction reversed.
2012-09-24 22:01:19 +02:00
Laura Sebesta
c3a402e52f
Add support for coaxial helicopter.
...
Untested.
2012-09-24 19:17:38 +02:00
PT_Dreamer
c04318493a
GCS- Fixes compile error
2012-09-24 13:38:14 +01:00
chris pember
616a27ca82
fixed that path error PT brought up in forum i hope
2012-09-23 22:34:40 -07:00
PT_Dreamer
dc10917f70
GCS-Yaw mixing level reverse button
...
Changed the slider values from -100/+100 to 0/100 and wrote the code for
the invert checkbox.
NOT TESTED
2012-09-23 22:50:05 +01:00
PT_Dreamer
4e1081179b
GCS-Auto Tuning
...
Added code to allow module to be enabled using the checkbox
2012-09-22 23:17:06 +01:00
chris pember
de924ccf5f
just doing local commits so I can grab it in my own branch, just spacing changes and a little rearrangement
2012-09-22 11:09:08 -07:00
chris pember
2e89db5315
Merge branch 'cp/extraGUIchanges' into next
2012-09-22 10:40:09 -07:00
chris pember
7d8c662aef
added the auto tune checkbox, changed the wording on the pre-autotune page
2012-09-22 10:37:22 -07:00
Fredrik Arvidsson
81efc2a931
Merge branch 'next' into thread/OP-39
...
Conflicts:
ground/openpilotgcs/src/plugins/config/configinputwidget.cpp
2012-09-22 10:58:55 +02:00
chris pember
8551f837b4
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into next
2012-09-21 20:44:51 -07:00
PT_Dreamer
8f23905a99
GCS- Input config gadget
...
Text changes only from Berkely
2012-09-21 18:40:55 +01:00
chris pember
d5661bec3e
adjusted the autotune page into 2 tabbed pages
2012-09-20 22:19:40 -07:00
Fredrik Arvidsson
69621ba2f8
Merge branch 'next' into thread/OP-39
...
Conflicts:
ground/openpilotgcs/src/plugins/config/configinputwidget.cpp
2012-09-20 23:53:33 +02:00
PT_Dreamer
8bd4a8c6fd
GCS - Very small UI fix on the autotuning page
2012-09-20 10:22:52 +01:00
PT_Dreamer
f8387bfaaa
GCS-Only update the aiframe config widget after all relevant objects are updated
...
This was deleted by someone with any aparent reason.
2012-09-18 14:23:35 +01:00
David Ankers
b9597e96f9
Spelling fix with input wizard, add a t to transmitter spotted by Drifter.
...
Conflicts:
ground/openpilotgcs/src/plugins/config/configinputwidget.cpp
2012-09-17 22:20:33 +10:00