peabody124
fda6fc8371
Merge branch 'mac_support'
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1324 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-18 14:29:53 +00:00
peabody124
450cf07a89
AHRS: Keeping magnetometer I2C address consistent with change to I2C driver.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1323 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-18 13:54:15 +00:00
FredericG
b46bc68e96
"addr" field of I2C transaction struct now takes real I2C address, and not address that is pre-shifted to accommodate the R/W bit
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1321 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-18 10:04:55 +00:00
FredericG
be2f5bbf70
ET OSD: Adapt to new I2C API
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1316 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-18 09:31:54 +00:00
peabody124
4cba4929c2
AHRS: Fixed another bug in decimation code - I stupidly used Matlab 1 based indexing. Adjusted timing of AHRS so it can process all the data and doesn't miss updates. Finally adjust all inputs to INS to have correct sign and orientation (I think). This is X is forward, Y is right, and Z is down which is mentioned in the forum as our standard and fits the algorithm. The magnetic sensor driver should be modified to return in this order (currently reads X,Y,Z registers which maps to left, back, up) but maybe since it's a board dependent orientation it's better where it is.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1315 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-18 05:47:44 +00:00
dschin
9ae9c87574
Six point sensor cal for accels and/or mags
...
Uploaded here for now - belongs in GCS probably.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1310 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-17 19:02:07 +00:00
peabody124
64bcebb87a
AHRS: Fixed bug in the downsampling code (used a += a + blah, dumb). Also added initialization of the magnetic flux based on fixed GPS settings (I hope you're near Houston). I will add the GPS communication shortly.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1307 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-17 05:32:07 +00:00
dschin
ae18a8e89c
Added general functions for coordinate conversions
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1306 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-17 00:09:32 +00:00
dschin
4f31bfbef7
Fixes for the project files. Hopefully they don't break someone else.
...
Eclipse Workspace:
- Made project in Eclipse workspace point to trunk/flight
- Re imported launch configurations from previous version
OpenOCD
- added "ft2232_device_desc "Dual RS232-HS"" back to jtag cfg files because windows didn't like it w/o it.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1305 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-16 23:40:27 +00:00
peabody124
f74268b5e5
Cleanup and documentation.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1304 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-16 16:58:24 +00:00
peabody124
a23f3c66f4
Behaving reasonably, added calibration code which runs by default on startup and take 6 seconds - this will be called from GCS in future and saved to SD card.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1303 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-16 16:58:22 +00:00
peabody124
e0d63103ec
Added a testing function for INS - currently doesn't stabilize for fixed inputs. Fixed two bugs I found in INSGPS (R[10] instead of R[9] initialized and Nav.Pos[2] was set to wrong X element).
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1302 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-16 16:58:20 +00:00
peabody124
d2e234b53a
Adding the code from Dr. Dale to the AHRS. Currently diverges though, but not on the PC.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1301 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-16 16:58:18 +00:00
peabody124
ddbd4f8c80
Simple attitude calculation based on gravity and magnetic vector
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1298 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-15 06:03:44 +00:00
peabody124
3f408ad655
AHRS: Changing AHRS to use a DMA double buffering scheme with continuous samping for the analog data, then a simple fixed point FIR/decimate function. Currently all the oversampling parameters are hard coded as definitions, but will be updated to be configurable via settings.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1297 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-15 04:09:01 +00:00
peabody124
cc2441d41b
Adding ADC downsampling code
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1296 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-15 04:08:57 +00:00
peabody124
ed70cb4794
[AHRS] Missed a setting for the ADC configuration.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1292 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-15 01:12:00 +00:00
stac
3125ecfc4e
AHRSComms: altitude sensor data is now sent to AHRS
...
Altitude/pressure sensor data is sent to the AHRS whenever
the AltitudeActual object is updated.
Altitude, Pressure and Temperature are sent as floats.
Same as in the UAVObject that goes to the GCS.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1291 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-15 01:02:13 +00:00
peabody124
d4c5dba234
[PIOS] The ADC mappings are strange because of the way the DMA engine works. Basically data is packed 16 bits ADC2 then 16 bits ADC1 channels, so the accels are pins [4 2 0] currently. Also there is inconsistency between the names of the pins in the config file which uses 1 based indexing and the index for PIOS_ADC_PinGet which is zero based and has to account for this interleaving. Probably should adjust config file to be zero based and then to make those pin numbers map to the function call. The actual order they appear is arbitrary as the ADC engine can scan in whatever order.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1290 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-15 00:53:30 +00:00
stac
c3e509c2cb
attituderaw: Replace HeadingActual with AttitudeRaw
...
AttitudeRaw now includes:
- magnetometers XYZ (in mG)
- gyros XYZ (raw ADC samples)
- accelerometers XYZ (raw ADC samples)
- placeholder for gyro temp sensors (read as zero for now)
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1289 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-14 23:42:14 +00:00
stac
5d635d4233
uavobjects: regenerate existing uavobjects
...
No functional change, uavobjects were not regenerated since last
change to the object generator.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1288 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-14 23:42:07 +00:00
vassilis
a075eafb98
FlightArchitecture: Updated description of Stabilization module (air/ground speed handled by guidance module)
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1285 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-14 14:19:33 +00:00
vassilis
9cd76fbe46
FlightArchitecture: Added Climbrate and Airspeed fields in Position objects
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1284 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-14 14:04:28 +00:00
vassilis
697b3510fb
Flight: First release of module architecture and dataflow diagram (still work in progress)
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1283 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-14 03:02:21 +00:00
peabody124
a084d21804
Merge branch 'watchdog'
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1281 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-13 05:18:17 +00:00
cwabbott
c1cf1ec71b
PiOS/Win32: Most stable version of port.c so far. Changed Makefile.win32 to use mingw32-gcc to avoid conflicts.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1278 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-12 14:32:52 +00:00
dschin
487b61473e
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1268 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-11 16:18:24 +00:00
cwabbott
1125311083
Fix Eclipse project files.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1252 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-09 18:24:26 +00:00
cwabbott
f041569bfe
fixed a small problem in port.c, also added some debug statements.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1246 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 18:38:03 +00:00
stac
f74c6ffdd5
i2c: rewrite i2c layer
...
The STM32 I2C block has a number of errata associated with it.
These errata are primarily related to timing sensitivities between
the peripheral and the interrupt handler. In particular, the
correct generation of the stop bit relies on the I2C IRQ running
immediately and not being held off for any reason.
NOTE: The I2C interrupts must be the highest priority IRQs in the
system to ensure correct operation.
I2C protocol is now implemented as a formal state machine.
See: stm32_i2c_fsm.{dot,jpg} for FSM description.
I2C init is now expressed by const initializers in pios_board.c
for both OP and AHRS boards.
I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays
of an unlimited number of bus transfers to be done atomically.
The I2C adapter driver now handles all bus-level locking across the
list of transactions. Generation of start/restart/stop conditions
are handled automatically over the list of transactions.
Timeouts have been removed from the API for now. May be added
back later.
This driver has run error free on both the OP and AHRS boards for
up to 48hrs but it still sometimes fails earlier than that on the OP
board. There is another possible set of improvements to the driver
that could employ the DMA engine for transfers of >= 2bytes. This
change would reduce the timing sensitivities between the peripheral
and the driver but unfortunately, both the SPI and I2C interfaces
share the DMA1 engine. That means only one of these two peripherals
can use the DMA engine and right now, SPI between OP and AHRS is
already using it.
Failures are currently fatal and will lock up the CPU. This allows
useful information to be obtained in the failure cases.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 04:15:08 +00:00
stac
b6c1f43145
i2c: Change API to allow passing const config data
...
Mark the I2C_InitStruct parameter as const so that we can pass
const data as the initializer.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1240 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 04:14:58 +00:00
stac
f66e2cbd86
battery: fix doxygen header info
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1239 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 04:14:56 +00:00
stac
9050b9d26a
ahrs_fsm: minor style fixups
...
No functional changes.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1238 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 04:14:55 +00:00
stac
a320a3e4d4
build: Turn modules back on
...
The modules were disabled for some reason in r1172.
This just turns them back on for the real targets.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1237 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 04:14:53 +00:00
stac
d7856b3d0a
gdb: Do not automatically reset target in gdb init file
...
The gdb init files would previously reset the target immediately
when gdb started up. This is sometimes an unpleasant side-effect
of running gdb.
In order to connect to the target, use the new "connect" function.
To reset the target use "mon reset".
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1236 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 04:14:52 +00:00
zedamota
a688b95eb6
Flight firmware-Start of the new bootloader
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1235 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 00:14:22 +00:00
dankers
297985c2a0
Move old bootloader to bootloader.old
...
This should be removed at some point but can wait till we have a working bootloader.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1234 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-07 23:55:28 +00:00
cwabbott
6f553efe45
debug_printf() for PiOS.win32. There are still many issues :(.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1226 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-07 02:30:35 +00:00
peabody124
0fdfbb2ffb
Deleting old USB code that I meant to delete a while ago. Also changed names of some functions to OP. Finally fixed the USB taking over PIOS telemetry. Detects the USB cable and that the configuration has been taken by the USB bus.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1217 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-05 23:43:52 +00:00
peabody124
0eac218572
Small update to make ManualControl get the command after setting it. That way if the flight system isn't meant to overwrite it (i.e. flying via GCS) it uses the right value. I think this should actually be the default behavior of UAVObject set... awaiting feedback from Vassilis.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1214 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-05 19:56:36 +00:00
pip
611aee73ad
Removed I2C support from PipBee as it's not used. Added 4 LED definitions.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1208 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-04 17:35:48 +00:00
pip
0331f05e9a
Added extra LED's .. now up to 4 LED's .. (PipBee has 4 controllable LED's)
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1207 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-04 17:32:42 +00:00
cwabbott
d910b8f756
slight changes to get PiOS.win32 to compile
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1205 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-04 14:21:58 +00:00
dankers
1a0f2e81e8
Foundations for PipBee modem code.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1203 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-04 09:37:09 +00:00
cwabbott
c2508bbb9e
PiOS for win32
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1200 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-03 19:29:14 +00:00
dankers
a3c1bbfc95
Remove no longer needed SDCard Files
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1190 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-01 14:00:09 +00:00
sambas
7f6336d324
OP-22 Flight/PiOS: Spektrum reworked, input is mapped to old aux in receiver connector, works nicely with calibration plugin. Also bind works, just needs config flag to bind on powerup
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1189 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-01 10:34:07 +00:00
peabody124
47da7326e7
Damn thought I'd commited this
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1176 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-29 13:50:24 +00:00
peabody124
23ed7c8435
Removing the device_desc line since it seems to advertise differenetly across platforms and openocd doesn't require it. Please revert this change if it starts block other OS but I don't think it will
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1175 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-28 21:29:27 +00:00
peabody124
7e6afe5a75
Updated HID code to do packet processing in OS indepdent layer. Should now work on all platforms. Please test and get back to me. Maximum object size of 62 bytes currently.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1174 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-28 18:55:04 +00:00
corvus
02a78f0470
moved Vassilis stabilization module as of r1153 into Stabilization/simple
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1173 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-28 15:03:55 +00:00
corvus
9ad9ffd466
moved new stabilization code into experimental subdirectory
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1172 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-28 15:00:51 +00:00
corvus
c8486d08e4
Fixed some bugs in OpenPilot Core.
...
- syntax error in pios_board_posix.c introduced with Doxygen comment blocks
- platform dependant code had been added to openpilot.c instead of pios_board.c
- redundant header inclusion (stm32... already included by PiOS)
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1171 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-28 14:34:48 +00:00
dankers
32e6d53b23
Small comment issue that was causing build to fail
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1170 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-28 11:28:18 +00:00
edouard
9145a4b1a6
Doxygen work: created "OpenPilot System" group for system libraries and core files. Changed a typo on the Osd Doxygen. Let me know if you're OK with this approach.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1169 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-28 07:28:21 +00:00
peabody124
6f63c10dca
Removing more debugging comments
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1168 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-27 23:48:12 +00:00
peabody124
3144e3157c
Added back checks on USB cable so falls back to serial telemetry if not plugged in
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1167 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-27 23:11:28 +00:00
peabody124
27bcd20882
HID working on Mac for telemetry. Need to tweak GCS code for Win/Linux
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1166 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-27 20:50:20 +00:00
peabody124
dac82b3c17
Getting closer for HID. Now a well behaved HID device. Just need to update GCS plugin for new data format and make PJRC wrappre work properly on Mac
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1165 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-27 19:09:55 +00:00
peabody124
27d429fe18
Got better HID report design with valid data length embedded in report
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1164 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-27 17:41:56 +00:00
FredericG
66e22b56ce
Fix in bmp085 driver. Was not checking correctly if lock on I2C succeeded => caused an assert when used in combination with other I2C devices
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1163 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-27 09:52:45 +00:00
FredericG
efaa6c910b
MKSerial: also report ground-speed
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1162 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-27 09:49:47 +00:00
peabody124
eb41a84acf
And this
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1161 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-27 08:09:43 +00:00
peabody124
7d7802593e
Oops, sorry missed these files
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1160 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-27 08:08:50 +00:00
peabody124
fe616df48d
Further tweaks. Will start trying to get reliable communication with larger report size tomorrow
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1159 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-27 07:56:50 +00:00
peabody124
840f7ff456
A version of the firmware that successfully Acks back and forth over HID. Still need to refine the PIOS interface and make GCS strip out the report ID data (if necessary). Also note: currently if you run too many modules the watchdog timer kicks in. I haven't determined if this is due to an interrupt binding up or what (and why it doesn't happen more often since I can't find any code that explicitly resets the WWDG).
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1157 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-27 06:22:34 +00:00
peabody124
d89cd43cd1
Further tweaks to the HID update
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1156 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-27 05:28:04 +00:00
peabody124
c46dcea73a
Pretty major update of the USB HID core. Removed a lot of old code related to custom drivers and BSL (which will be brought back under HID). Device enumerates but still not communicating. Hopefully nothing broken, lots changed.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1155 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-27 03:19:07 +00:00
corvus
2621d07574
Added UAVObjects: FlightSituationActual NavigationSettings NavigationDesired
...
- Added FlighSituation Module (development module for sensor fusion, mostly stub, possibly renamed later)
- Added Navigation Module (development module for navigating towards a point in space - DEVELOPMENT CODE, NOT STABLE YET (I am testing around with this))
- Changed Stabilization Module (uses local reference frame now. Stable except for code cleanup/review. Tested in simulator and outperforms old code.)
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1154 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-26 21:26:28 +00:00
dankers
dab978cf98
DOh! should have been part of last commit.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1151 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-23 04:35:10 +00:00
dankers
1fb8fc797c
Floss-JTAG file for new Revision B of Floss-JTAG (Rowan JTAG).
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1150 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-23 04:34:32 +00:00
dschin
e5c19a38c5
In the the \OpenPilot\flight\Project\OpenOCD directory there were two JTAG debugging config files:
...
1) floss-jtag.arhs.cfg
2) floss-jtag.openpilot.cfg
But the Eclipse project the "external tools configurations" for the OpenOCD Debug is looking for the "floss-jtag.cfg" file in the command line arguments. The added file "floss-jtag.cfg" is a simply a copy of "floss-jtag.openpilot.cfg". The .arhs.cfg doesn't play well by itself.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1129 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-17 22:43:26 +00:00
peabody124
d928676f5e
More documentation updates, standardizing format to include addtogroup at the beginning of headers so files are associated with modules
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1121 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-16 19:53:35 +00:00
sambas
f5c24d169e
flight/osd: Parse config into setupbits and parameter slots
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1115 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-16 15:24:29 +00:00
peabody124
99e94228a9
More doxygen updates
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1106 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-16 05:31:11 +00:00
peabody124
1cd81e211f
Added Doxygen comments for OpenPilot modules
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1101 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-16 01:02:34 +00:00
peabody124
5c41f95a1e
Updating OSX project file for new file locations
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1100 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-15 02:16:54 +00:00
peabody124
ebeffa4392
Linux compiler error fix
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1097 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-14 15:45:36 +00:00
peabody124
700af355d4
Moved platform dependent configurations to FreeRTOSConfig.h and set windows to run without preemption to reduce CPU usage
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1096 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-14 15:34:57 +00:00
corvus
aa53b57d55
Changed the Build directory for posix port from Build/ to Build.posix/
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1090 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-14 10:08:03 +00:00
corvus
48db68fe3c
add some self made FreeRTOS scheduler documentation
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1088 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-13 18:55:26 +00:00
peabody124
53b90b9492
Updated to use sigwait as an alternative to signals for the timer. Also, added per task suspend/resume flags which should make sure things behave nicely
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1087 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-13 18:29:39 +00:00
corvus
fa57e42efa
Deleted OpenPilot.posix branch. Integrated portability modifications into main tree
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1086 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-13 16:23:41 +00:00
corvus
65d0c93680
Added some comment lines for peabody124 to read ;)
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1078 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-12 17:15:00 +00:00
peabody124
68be63bc50
Conditional signaling now works on linux
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1075 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-11 21:42:59 +00:00
peabody124
cd5c03b809
Ugh, cross platform development.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1073 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-11 20:46:22 +00:00
peabody124
0bc526a142
Got the tick handler working on linux so it doesnt jump onto the wrong thread
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1072 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-11 20:38:20 +00:00
peabody124
4c4d1ca420
Also added sched_yield().
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1071 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-11 20:27:03 +00:00
peabody124
9ff624bc0f
I'm an idiot. I put ifndef __darwin__ when I meant ifdef. Works on linux now with minimal CPU.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1070 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-11 20:23:34 +00:00
corvus
ae4a52e0ed
test cases for signal handling
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1069 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-11 16:43:41 +00:00
corvus
71589d2246
simple segfault reproduction
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1068 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-11 15:11:26 +00:00
corvus
0efc69055e
fix in print function *ducks*
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1067 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-11 13:57:20 +00:00
corvus
1dd60b54f6
thread safe printf implementation now
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1066 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-11 13:20:22 +00:00
FredericG
5bb4fedc7f
attitude seq field was removed
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1065 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-11 12:25:43 +00:00
corvus
ece979a4e1
ported latest changes by Vassilis and Stac to Posix version
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1064 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-11 12:13:43 +00:00
peabody124
c6b495cdcc
This version runs stably on all three platforms for me. Corvus, please feel free to revert these changes if you want or have a better solution. Also only Mac tested with GCS, the rest just sit there running nicely
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1063 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-11 02:23:11 +00:00
peabody124
dd598a75a4
This version runs stably on all three platforms for me. Corvus, please feel free to revert these changes if you want or have a better solution. Also only Mac tested with GCS, the rest just sit there running nicely
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1062 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-11 02:22:24 +00:00
vassilis
9f2a01a78a
Flight/Servo Fix Servo driver buffer overflow, was messing up the I2C and altitude readings, now working fine. Servo index used to be 1-8 but the Servo driver was indexing a buffer out of bounds. Changed everything to use index 0-7 for servo outputs.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1061 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-11 01:54:43 +00:00
stac
3896baa908
usb hid: fix compiling with ALLOW_HID_TELEMETRY
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1060 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-10 14:56:27 +00:00
peabody124
bd197886e5
Added some include files for task.c and removed an asserting that is sometimes violated in the signal handler
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1059 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-10 14:07:28 +00:00