Philippe Renon
489f59b65d
OP-1351 fixed issue that caused thermal calibration to progress bar to move back
2014-05-31 19:42:53 +02:00
Philippe Renon
5182ccc2eb
OP-1351 initial cleanup of thermal calibration + added attempt at simulating the temperature rise
2014-05-31 19:42:40 +02:00
Philippe Renon
14e8e769c8
OP-1351 made help icon size consistent accross configuration panels
2014-05-30 19:06:34 +02:00
Philippe Renon
111dcd704f
OP-1351 SixPointCalibrationModel will now only save relevant parts of uavobjects to avoid stomping irrelevant parts
2014-05-30 19:06:34 +02:00
Philippe Renon
ac61ed35d2
OP-1351 use two instances of SixPointCalibrationModel (one for accel and one for mag calibration) to avoid apply/save issues when using only one
2014-05-30 19:06:29 +02:00
Philippe Renon
9f50859978
OP-1351 Apply and Save logic for board level calibration now works as expected
2014-05-30 18:07:23 +02:00
Philippe Renon
20708f0058
OP-1351 Apply and Save logic for sxi point calibration now works as expected
2014-05-30 15:11:37 +02:00
Philippe Renon
934a11bd96
OP-1351 Apply and Save logic for gyro bias calibration now works as expected
2014-05-30 15:09:07 +02:00
Philippe Renon
bd6bd043d1
OP-1351 thermal calibration - fixed duplicate signal warning
2014-05-29 00:26:37 +02:00
Philippe Renon
9cced08f82
OP-1351 reviewed instructions text for all calibration steps
2014-05-28 23:43:11 +02:00
Philippe Renon
60700cab7f
OP-1351 improved instructions handling for thermal calibration (removed duplicates, specified instruction types)
2014-05-28 23:07:31 +02:00
Philippe Renon
c9b64d6399
OP-1351 reverted use of QToolbox + tried to better handle resizing of visual help
2014-05-25 22:48:36 +02:00
Philippe Renon
0f72ca05e9
OP-1351 cleaned up instruction handling code (less hacky)
2014-05-25 20:14:26 +02:00
Philippe Renon
48558f75e6
OP-1351 disable other calibration steps when running thermal calibration
2014-05-25 18:46:51 +02:00
Philippe Renon
9a1a43186a
OP-1351 attempt at using a QToolbox for the calibration steps UI (wip to get early feedback)
2014-05-23 09:15:24 +02:00
Philippe Renon
297671ae68
OP-1351 temperature (absolute and variance) are displayed again. cleaned up related code.
2014-05-22 21:22:54 +02:00
Philippe Renon
4feaa72998
OP-1351 thermal calibration step now uses instruction panel like all other steps (WIP).
...
Display of temp and temp variation currently broken.
2014-05-21 23:14:09 +02:00
Philippe Renon
e8b7a025ba
OP-1351 calibration ui : Moved instruction panel below button panel to free
...
space for visual help. Made visual help image respect aspect ration. Text
panels are now non editable, reworked help text and step names.
2014-05-21 23:14:08 +02:00
Philippe Renon
eee02bafe6
first version (resizing should go to image, might need a split pane)
2014-05-21 23:14:08 +02:00
Philippe Renon
fe60509ffa
OP-1331 uncrustified
2014-05-16 23:53:04 +02:00
Philippe Renon
846146ca80
Merge branch 'filnet/OP-1331_alignment_issue_in_input_output_channel_config' into next
...
Conflicts:
ground/openpilotgcs/src/plugins/config/configgadgetwidget.cpp
2014-05-16 23:51:13 +02:00
Philippe Renon
9fe0c6516c
OP-1331 slightly increased min width of Input Channel Function combobox
2014-05-15 00:20:45 +02:00
Philippe Renon
ced787d716
OP-1331 fixed regression in widget binding framework (handling of scale was broken)
2014-05-14 23:37:40 +02:00
Philippe Renon
b74e1c19bf
OP-1331 slightly increased min width of Input Channel Type and Number comboboxes
2014-05-14 22:11:15 +02:00
Philippe Renon
c32026b906
OP-1331 hopefully last tweaks for input/output channel alignment on CliffOS (most component width are now self adjusting)
2014-05-13 22:52:10 +02:00
Philippe Renon
940074e6f6
OP-1348 Congig gadget would briefly flash next widget when replacing the currently selected widget (missing change)
2014-05-13 22:06:10 +02:00
Philippe Renon
513ba37746
OP-1348 Congig gadget would briefly flash next widget when replacing the currently selected widget
2014-05-13 22:04:01 +02:00
Philippe Renon
e9f14544f9
OP-1346 GCS was not allowing setting the ResponseTime for the Collective input channel.
...
Worse GCS would then shift the values (Accessory0 would go to Collective, Accessory1 to Accessory0,
Accessory2 to Accessory1 and Accessory2 would always be zero)
2014-05-12 22:42:01 +02:00
Philippe Renon
6804e5fe8e
OP-1331 factored common code between InputChannelForm and OutputChannelForm into new abstract class ChannelForm
2014-05-12 22:30:50 +02:00
Philippe Renon
38b0617596
OP-1331 uncrustified
2014-05-11 22:08:35 +02:00
Philippe Renon
7affc8d12f
OP-1331 OP-1335 BITFIELD was removed by mistake from UAVObjectField::isNumeric() (self review)
2014-05-11 18:53:49 +02:00
Philippe Renon
88100a72c2
OP-1331 OP-1335 revisited GComboBox to integer binding (less hacky now ;) )
2014-05-11 18:48:39 +02:00
Philippe Renon
9cf24a9731
OP-1331 minor tweaks to output channel form
2014-05-11 17:46:37 +02:00
Philippe Renon
b6a297c40f
OP-1159 Removed "Rev" checkboxes on input tab for channels on which it doesn't have an effect
2014-05-11 17:42:44 +02:00
Philippe Renon
048ca0787f
OP-1343 GCS Config - Input Channel Response Time was not saved + Made visible only for relevant channels.
2014-05-11 17:32:04 +02:00
Philippe Renon
fcc16367eb
OP-1331 fixed compilation error in configgadgetwidet introduced with last commit
2014-05-11 16:30:31 +02:00
Philippe Renon
9012f0aa89
OP-1331 commented out useless GCS logging
2014-05-11 16:20:07 +02:00
Philippe Renon
3a02149d1d
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into next
2014-05-11 14:56:56 +02:00
Philippe Renon
40ed1fc570
OP-1174 fixed GCS telemetry build dependency issue
2014-05-11 14:20:31 +02:00
Philippe Renon
274c6aadad
OP-1331 trying new approach to address input/output channel configuration grid alignment issues.
...
New approach is to move the individual widgets to the parent grid layout in order to have them all under the same constraints.
This wip to have feedback on other OSes.
2014-05-10 20:40:14 +02:00
Corvus Corax
29cef5876d
Merge branch 'amorale/OP-975_calibration_process_changes' into corvuscorax/OP-1161_magnetometer-alarm
...
Conflicts:
ground/openpilotgcs/src/plugins/config/calibration/sixpointcalibrationmodel.cpp
2014-05-08 21:27:01 +02:00
Corvus Corax
ce8e9db362
Merge branch 'next' into corvuscorax/OP-1161_magnetometer-alarm
2014-05-08 21:16:21 +02:00
Philippe Renon
da3d9d61fc
OP-1331 fixed alignment issues in Config Output channel list (mostly by fixing the size of items).
...
Includes other minor UI cleanups (spin box text right aligned, ...)
2014-05-08 18:31:09 +02:00
Philippe Renon
fed7fba84f
OP-1331 fixed alignment issues in Config Input channel list (mostly by fixing the size of items).
...
Removed hidden channelNumber spin box. Included other minor UI cleanups (spin box text right aligned, ...).
2014-05-08 18:31:01 +02:00
Philippe Renon
07a828f971
OP-1331 OP-1335 Added support in ConfigTaskWidget to bind a GComboBox to an integer property
2014-05-08 17:55:20 +02:00
Philippe Renon
cc1c4db786
Merge branch 'filnet/OP-1174_beautify_uploader_gadget_popups' into next
2014-05-08 00:28:26 +02:00
Alessio Morale
96904bdf50
OP-975 Use GyroSensor UAVO when available for gyro calibration (on revo GyroState is biased by EKF gyrobias, so it reads almost always 0)
2014-05-07 22:34:27 +02:00
Corvus Corax
2da1f2aa09
Merge branch 'corvuscorax/OP-1309_Stabilization-Refactoring' into corvuscorax/OP-1161_magnetometer-alarm
2014-05-07 22:26:20 +02:00
Alessio Morale
bd7b1f8d57
OP-975 some visual enhancemets to UI (moving save button for level, adding spacers, showing percentage to progressbar)
2014-05-07 21:07:08 +02:00
Alessio Morale
7451e3d0a5
OP-975 fix some help text.
2014-05-07 21:03:08 +02:00
