James Cotton
4b3dcc4cc2
Make the leveling panel not crash for new gyro/accel objects but still needs
...
tweaking for CC3D.
2012-01-24 16:14:41 -06:00
James Cotton
b6c056fef2
Use the updated L3GD20 format and make attitude.c use the gyro data from the
...
fifo
2012-01-24 15:52:17 -06:00
James Cotton
c9263cb8c0
L3GD20: Dynamically allocate buffer structure when used
2012-01-24 15:51:38 -06:00
James Cotton
5efbfb02fa
Make the BMA180 sensor system acquire from the queue. Correct the orientation
...
and speed it up to 10 MHz communications.
2012-01-24 15:09:20 -06:00
James Cotton
8c208412c9
Give the BMA180 a dynamically allocated device structure and also make it
...
properly bind to a SPI and slave number. Temporarily reducing spi bus to
slowest possible speed.
2012-01-24 14:38:00 -06:00
James Cotton
aec7dd0b00
Initialize the LEDs early in the bootup process
2012-01-24 14:37:04 -06:00
James Cotton
8e79bc2ee2
Temporarily refactor attitude to directly read the sensors instead of pull from
...
their queues until the interrupts are working properly
2012-01-24 11:54:23 -06:00
James Cotton
e9552065a9
Reenable the CC3D sensors
2012-01-24 11:03:33 -06:00
James Cotton
466992a907
Migrate some of the CC board settings to the new board_hw_defs
2012-01-24 10:58:40 -06:00
James Cotton
c242ab8b86
Merge branch 'next' into revolution3
...
Conflicts:
flight/AHRS/ahrs.c
flight/AHRS/pios_board.c
flight/Bootloaders/Revolution/Makefile
flight/CopterControl/System/pios_board.c
flight/INS/pios_board.c
flight/OpenPilot/Makefile
flight/OpenPilot/System/openpilot.c
flight/OpenPilot/System/pios_board.c
flight/PiOS/Boards/STM32103CB_CC_Rev1.h
flight/PiOS/Boards/STM32F4xx_Revolution.h
flight/Revolution/Makefile
flight/Revolution/System/inc/pios_config.h
flight/Revolution/test.c
2012-01-24 10:46:35 -06:00
James Cotton
f029567e66
Remove meaningless settings from CC config file
2012-01-24 10:39:35 -06:00
James Cotton
66293a9788
Merge remote-tracking branch 'origin/stac/led-boottime-config' into next
2012-01-24 10:38:33 -06:00
James Cotton
7c22215e0b
Patch from Sambas to fix F4 on windows
2012-01-24 10:33:07 -06:00
James Cotton
486cdb5dbb
Got CC running again although with altitude and bmp085 disabled as well as the
...
CC3D drivers.
2012-01-24 10:32:42 -06:00
Oleg Semyonov
f7ac0b2645
Merge remote branch 'origin/master' into next
2012-01-24 17:27:34 +02:00
James Cotton
be50c00b7c
Make sure BMA180/L3GD20 can be disabled
2012-01-24 09:23:13 -06:00
James Cotton
4d3af7afbf
Add ID test to ADXL345
2012-01-24 09:23:12 -06:00
James Cotton
946c6a7f1d
Fix small bugs in pios_board.c relating to adxl345 spi configuration
2012-01-24 09:23:12 -06:00
James Cotton
728c05f973
Crude implementation of sensor reading for CC3D
2012-01-24 09:23:12 -06:00
James Cotton
0cb6b13d33
Add BMA180 to CopterControl 3D. Had to reduce the stack space by 256 bytes.
...
Some can be reclaimed by making the BMA180 allocate its fifo dynamically but
I'll do that later when it uses FreeRTOS queues for the FIFO.
2012-01-24 09:23:12 -06:00
James Cotton
11471ff68b
Update drivers for CC to the new EXTI system and SPI calls
2012-01-24 09:23:12 -06:00
James Cotton
a20d654744
Update the attitude algorithm for CC to use the Gyros and Accels UAVObjects
...
instead of AttitudeRaw
2012-01-24 09:23:12 -06:00
James Cotton
4cf82815ce
Get the right pios_iap.c from next
2012-01-24 09:23:07 -06:00
Oleg Semyonov
da650cee60
gcscontrol: keep joystick image aspect ratio
...
OP-619
2012-01-24 11:31:00 +02:00
James Cotton
aaf1c5dfdd
Update the F1 SPI library to support multiple NSS lines
2012-01-23 23:27:02 -06:00
James Cotton
5fd458426a
Merge branch 'cc3d' into revolution3
...
Conflicts:
flight/PiOS/inc/pios_l3gd20.h
flight/PiOS/pios.h
flight/Project/OpenPilotOSX/OpenPilotOSX.xcodeproj/project.pbxproj
2012-01-23 22:09:45 -06:00
Stacey Sheldon
5907022b6d
Merge remote-tracking branch 'origin/stac/ld-2.22-fix' into next
2012-01-23 23:05:52 -05:00
James Cotton
bcb49cbd33
Merge branch 'next' into cc3d
...
Conflicts:
flight/PiOS/STM32F10x/pios_exti.c
2012-01-23 17:09:47 -06:00
James Cotton
2524662475
Copy the BMP085 back from next
2012-01-23 16:58:07 -06:00
James Cotton
b01d5c6b87
Include the drivers from the common directory
2012-01-23 16:58:07 -06:00
James Cotton
886d5456ac
Update pios_exti for F4
2012-01-23 16:55:54 -06:00
James Cotton
9a12299074
Update the driver cfg structures for the EXTI changes. Make the drivers call
...
the pios_exti_init instead of their individual implementations.
2012-01-23 16:55:52 -06:00
James Cotton
b2a292e9c4
Move all the drivers to the PiOS/Common directory to prepare for refactoring
...
the EXTI calls they make to the portable version
2012-01-23 10:11:46 -06:00
James Cotton
c84240e485
Merge branch 'next' into revolution3
...
Conflicts:
flight/PiOS/STM32F10x/pios_bmp085.c
flight/PiOS/STM32F10x/pios_exti.c
2012-01-23 06:51:30 -06:00
James Cotton
21ae37b3de
Remove BMP085 driver from F4 target
2012-01-23 06:44:25 -06:00
James Cotton
16e8fa89d1
Merge remote-tracking branch 'origin/stac/exti-cleanup' into next
2012-01-23 06:14:48 -06:00
James Cotton
7b69cebe04
Merge branch 'master' into next
2012-01-23 06:07:31 -06:00
James Cotton
d864b481a1
Fix a few more merge conflicts
2012-01-23 04:47:35 -06:00
Stacey Sheldon
bfe6676eed
exti: rewrite exti layer to improve portability
...
The exti layer now allows drivers to register interrupt callbacks
during board initialization. All details of the driver using a
particular EXTI pin have been removed from the EXTI layer so it
can now be used on any board without board-specific modification.
This includes some nice refinements provided by Mike Smith during
initial review. His original commits have been squashed into this
one.
2012-01-22 23:23:41 -05:00
Stacey Sheldon
dc4aa07a32
board_hw_defs: factor out board-specific hw config definitions
...
Board specific HW configuration is now collected in a single .c
file for each board. This HW configuration is #include'd into
the FW, BL and BU builds for each board.
These new .c files are found in:
flight/board_hw_defs/<board_name>/board_hw_defs.c
Parts of this information were previously duplicated between
the BL and FW builds. This commit cleans up the duplication.
Using a #include on a .c file is a bit ugly but it allows us
to ensure that all of the symbols in the board_hw_defs.c file
are *ONLY* used in the PIOS_Board_Init() function for each
software build.
2012-01-22 19:41:41 -05:00
Stacey Sheldon
6bb4f0c61d
leds: use boot-time config for PiOS LED layer
...
LEDs are now configured based on a board-specific initialization
in PIOS_BOARD_Init().
LEDs are now named:
PIOS_LED_HEARTBEAT
PIOS_LED_ALARM
2012-01-22 18:22:59 -05:00
Stacey Sheldon
3cbf4499e1
ld: make sure current pointer never goes backwards
...
Fixes linking on ld version 2.22.
2012-01-21 21:18:06 -05:00
James Cotton
cc0cbf0381
Enable IAP code on revolution now
2012-01-21 13:22:39 -06:00
James Cotton
fe44a3d37a
Reference correct taskmonitor file compiled in to revolution
2012-01-21 13:22:17 -06:00
James Cotton
e505de7ba0
Remove redundant remap field from merge
2012-01-21 13:22:00 -06:00
James Cotton
838370b3a4
Fix calls to backup registers on F4
2012-01-21 13:21:37 -06:00
James Cotton
bb0bfe0ae4
Merge branch 'next' into revolution3
...
Conflicts:
flight/Bootloaders/CopterControl/Makefile
flight/Bootloaders/PipXtreme/Makefile
flight/Bootloaders/Revolution/inc/pios_config.h
flight/CopterControl/Makefile
flight/INS/inc/pios_config.h
flight/Libraries/taskmonitor.c
flight/Modules/Altitude/altitude.c
flight/Modules/Attitude/attitude.c
flight/OpenPilot/Makefile
flight/OpenPilot/Makefile.posix
flight/OpenPilot/System/inc/pios_usb_board_data.h
flight/OpenPilot/System/inc/taskmonitor.h
flight/OpenPilot/System/pios_board.c
flight/OpenPilot/System/taskmonitor.c
flight/PiOS/Boards/STM32F4xx_Revolution.h
flight/PiOS/STM32F4xx/pios_bmp085.c
flight/PiOS/STM32F4xx/pios_iap.c
flight/PiOS/pios.h
flight/Revolution/System/inc/pios_config.h
flight/Revolution/System/inc/taskmonitor.h
flight/Revolution/System/taskmonitor.c
ground/openpilotgcs/src/plugins/serialconnection/serialplugin.cpp
shared/uavobjectdefinition/systemalarms.xml
shared/uavobjectdefinition/taskinfo.xml
2012-01-21 11:27:03 -06:00
James Cotton
f8e59443b8
If the BMA180 isn't read when an IRQ fires (because the flash chip has claimed
...
the bus) then it won't fire another interrupt until read. For now this is
dealt with in the sensor loop by forcing a read when the fifo is empty.
2012-01-21 10:13:46 -06:00
James Cotton
f6db859e4f
Fix bug in flash driver where it could assert CS line after failing to claim
...
the bus. Also added a "claimed" flag to the device structure.
2012-01-21 09:57:12 -06:00
James Cotton
5dbbfec8a9
Make the BMA180 driver use the appropriate claim method from the ISR. Also
...
slow down this bus to 10 MHz.
2012-01-21 09:57:02 -06:00
