Alessio Morale
2a10d9d481
OP-1683 - fixes to PIOS_Servo, added code to prevent overflows
2015-01-24 13:35:41 +01:00
Alessio Morale
411416d2a1
OP-1683 - Fix compilation for CC (not yet supported)
2015-01-24 00:18:20 +01:00
Alessio Morale
1f95332ff4
OP-1683 - Implement servo synchronous update mode for F4
2015-01-23 23:50:51 +01:00
Fredrik Arvidsson
c8c3a46735
Uncrustify
2015-01-09 21:49:03 +01:00
Mathieu Rondonneau
acc124cacb
OP-1625: DSM: more robust detection of resolution
...
This allows switching back and forth between 10 and 11 bit
code which prevents getting locked up in one or the other.
It also avoids a situation that can cause an infinite
recursion.
This changeset is cherry-picked from TauLabs (b7eaf87502085666d9738ae16c66170f187f3981).
Thanks to Taulabs for improving OpenPilot's DSM autodetect feature.
2014-12-30 21:29:06 -08:00
Mathieu Rondonneau
6844f8351d
run uncrustify.
2014-12-04 20:17:29 -08:00
Mathieu Rondonneau
4b00f6039d
OP-1626: Allow binding to happen within satellite binding window.
...
- This is working for satellite 22ms (genuines and clones).
- This change only affect revo.
2014-11-29 19:59:18 -08:00
Alessio Morale
99d73426b8
Uncrustify
2014-11-27 12:05:59 +01:00
Fredrik Larsson
1687ef7e8f
Merge remote-tracking branch 'origin/rel-14.10' into next
2014-11-23 12:15:32 +11:00
Fredrik Larsson
cd94410468
DSM Protocol removed flight firmware
2014-11-22 08:32:00 +11:00
Fredrik Larsson
1942d2ee30
Remove protocol enum
2014-11-22 07:44:55 +11:00
Mathieu Rondonneau
b0cc9ce021
OP-1625: DSM2/DSMX autodetection of channel resolution.
2014-11-20 19:58:34 -08:00
Mathieu Rondonneau
1c6ac29218
OP-1625: DSM2/DSMX autodetection of channel resolution.
2014-11-18 19:35:57 -08:00
Werner Backes
4b68deb878
Disable the "preamble invalid" interrupt for the RFM22b module. It causes
...
high CPU load and isn't used anyway.
2014-11-16 20:16:02 +11:00
Werner Backes
d9a3fac502
Disable the "preamble invalid" interrupt for the RFM22b module. It causes
...
high CPU load and isn't used anyway.
2014-11-15 11:37:06 +01:00
Corvus Corax
c21d3d8a67
uncrustification!
2014-11-08 12:59:16 +01:00
Fredrik Larsson
2dc777304e
Merge remote-tracking branch 'origin/abeck/OP_1503v3-yaffs' into next
2014-10-31 10:09:39 +11:00
Alex Beck
e2b38d0d7d
Yaffs or dosfs now conditional linkage for simposix yaffs testing
2014-10-28 08:48:38 +11:00
Alex Beck
b4e3fe137b
Removed unrequired signals from handler
2014-10-25 20:01:32 +11:00
Alex Beck
c6aa4ed1d6
Added signal handler that on ctrl-c will unmount the yaffs device(s) and save to the em-norsim file
2014-10-25 19:55:56 +11:00
abeck70
942945850b
Merge branch 'next' into abeck/OP_1503v3-yaffs
2014-10-23 21:25:54 +11:00
a*morale
d1a229a9cb
OP-1553 OPLink does not work as non coordinator
...
Revert "OP-1535 - SPI:Use pio for small blocks"
This reverts commit 823a1afad2
.
2014-10-20 21:46:14 +02:00
Karl Knutsson
5ab924c07e
Revert "OP-1522 Robustness of OPLink radio"
...
This reverts commit 00d9c66867
.
2014-10-16 08:23:10 +02:00
Karl Knutsson
5ef8d3803d
Revert "OP-1530 Use rfm22b_dev->num_channels"
...
This reverts commit 4e365f6dff
.
2014-10-16 08:23:10 +02:00
Karl Knutsson
b69e222456
Revert "OP-1532 fix non-ppm mode"
...
This reverts commit 9fd4fb26b9
.
2014-10-16 08:23:10 +02:00
Alessio Morale
a9f35e2afe
Merge branch 'amorale/OP-1535_mpu_overhaul' into next
2014-10-16 00:51:02 +02:00
abeck70
de68e0179f
First round review comments
2014-10-14 17:17:59 +11:00
Alessio Morale
823a1afad2
OP-1535 - SPI:Use pio for small blocks
2014-10-11 09:57:25 +02:00
Stefan Karlsson
3285519380
OP-1536 Send only the available bytes, not the entire buffer, to the USB CDC RX callback function
2014-10-10 23:51:04 +02:00
Alessio Morale
4a8cfe3f86
OP-1535 - Refactor MPU6k driver to allow direct and fifo access based on configuration
2014-10-10 22:33:50 +02:00
Alessio Morale
9350bd65d9
OP-1535 - change sensor rate to 1KHz with software downsample to 500Hz
...
Allow per board SPI prescaler settings
2014-10-10 22:33:49 +02:00
abeck70
948d6546af
yaffs simposix ready for review
...
All yaffs changes for library inclusion, arm compilation, and simposix integration.
2014-10-10 13:21:06 +11:00
Karl Knutsson
9fd4fb26b9
OP-1532 fix non-ppm mode
...
Always send packets from the coordinator.
Previously the coordinator only always sent packets
on channel 0. This scheme doesn't work with
with the change to use 32 channel.
2014-10-08 20:59:51 +02:00
Fredrik Larsson
cb6e9fda6d
Merge remote-tracking branch 'origin/havyan/oplink-0' into next
2014-10-08 08:02:48 +11:00
Karl Knutsson
4e365f6dff
OP-1530 Use rfm22b_dev->num_channels
...
Use the number of allocated channel from the num_channels field
in the pios_rfm22b_dev struct rather than from the maximum number
of possible of channels given the configured speed.
2014-10-07 22:50:52 +02:00
Karl Knutsson
00d9c66867
OP-1522 Robustness of OPLink radio
...
Increase number of channels to 32 for all bit rates.
Synchronize clock on all channels.
Go into failsafe after 4 or 8 (one_way_link) missed packets.
Don't stay on channel 0 if we dropped a packet.
2014-10-03 22:20:11 +02:00
Karl Knutsson
1c6e9b3cc4
OP-1510 don't hard code tx_power to 100mW
2014-10-03 22:20:11 +02:00
Alessio Morale
8e2e534c60
Uncrustify/clean commented code
2014-10-03 11:41:26 +02:00
Alessio Morale
e553014596
Merge branch 'amorale/OP-1476_1477_1275_GPSV9_pios_firmware_bootloader' into next
2014-10-03 00:37:55 +02:00
Alessio Morale
9cfd55d006
Merge branch 'amorale/OP-1507_gps_module_cpu_optimization' into next
2014-10-03 00:37:39 +02:00
Alessio Morale
ae9f30c729
OP-1477 - Fix mag exti config, set correct rate, set correct SPI speed for hmc5x83. Note: GPIO is disabled as it seems there is some issues with Exti on PB0
2014-10-01 02:07:46 +02:00
Alessio Morale
0ffb99f228
OP-1477 - Fix issue with quick request to DDC port, change baud rate to 57600, fix sys rate, optimize uart tx
2014-10-01 02:06:03 +02:00
Alessio Morale
9e0596c2c5
Merge remote-tracking branch 'origin/amorale/OP-1379_ext_led_notification_module_new' into next
...
Conflicts:
Makefile
flight/targets/boards/discoveryf4bare/firmware/Makefile
flight/targets/boards/revolution/firmware/Makefile
2014-09-29 21:26:31 +02:00
Alessio Morale
93cf6b457f
OP-1507 - optimize com fifo usage when RX callback receives a single byte
2014-09-27 00:20:15 +02:00
Alessio Morale
7e789ccc69
OP-1379 - Clear output pin at the end of dma cycle
2014-09-25 00:59:39 +02:00
Alessio Morale
c772442723
OP-1477 - remove debug infos and add send some relevant informations using SYS message (firmware and board revision/info)
2014-09-24 01:06:41 +02:00
Alessio Morale
3c6a8e0395
OP-1379 - Prevent loosing any update to background notification and notifications with priority higher than current
2014-09-21 23:32:52 +02:00
Alessio Morale
7e73c59e90
OP-1476 - Fixes for Bootloader
...
- Allocate 10KBytes for bootloader;
- Replace pios_com_msg with pios_com for ssp support
- Change Speed to 9600 for higher reliability
2014-09-16 22:40:53 +02:00
Alessio Morale
f2a0daac5c
OP-1477 - Add pios_ubx_ddc driver to handle i2c comms with UBlox GPS
2014-09-16 22:40:52 +02:00
Alessio Morale
81ae43ac40
OP-1275 - fix Watchdog
2014-09-16 22:40:50 +02:00