Alessio Morale
|
5b4d46819e
|
OP-1022 Fix problem with EventSystem due to too high update rate
|
2013-07-16 12:25:58 +00:00 |
|
Alessio Morale
|
e975e4d9b7
|
OP-1022: replace old KF in alitude hold with status from filters
|
2013-07-16 12:25:57 +00:00 |
|
Alessio Morale
|
a57f8913ba
|
OP-1022: replace old KF in alitude hold with status from filters
|
2013-07-16 12:25:57 +00:00 |
|
Alessio Morale
|
133ad414f8
|
OP-1022: Added a velocity loop in AH module, used when throttle is not in central position.
|
2013-07-16 12:25:57 +00:00 |
|
Werner Backes
|
23b5b37480
|
Scale down initial throttle when AH is engaged based on roll/pitch angle.
This improves AH behaviour when switching to AH while being in fast
forward flight.
|
2013-07-16 12:25:57 +00:00 |
|
Werner Backes
|
513d509865
|
Initialize altitude before switching to "running". Not doing this could
cause glitches during the very first switch to AH.
|
2013-07-16 12:25:57 +00:00 |
|
Werner Backes
|
1da68cda9a
|
Scale up desired throttle in AH mode to compensate for roll/pitch
|
2013-07-16 12:25:57 +00:00 |
|
Werner Backes
|
73aa4df431
|
Missing "
|
2013-07-16 12:25:57 +00:00 |
|
Werner Backes
|
723f308ac7
|
Removed obsolete (unused) code
|
2013-07-16 12:25:57 +00:00 |
|
Werner Backes
|
45ed66414f
|
Changed AH to work with absolute instead of relative altitude
|
2013-07-16 12:25:56 +00:00 |
|
Werner Backes
|
aecc8543a5
|
Corrected throttle stick exponentional function in AH mode
|
2013-07-16 12:25:56 +00:00 |
|
Alessio Morale
|
11bc7804d0
|
Merge branch 'amorale/OP-994_adc_cleanup' into next
|
2013-07-16 12:23:25 +00:00 |
|
Corvus Corax
|
81e691f2d6
|
fixed stack size for manualcontrol, fixed acking behaviour for waypoints
|
2013-07-16 10:12:16 +02:00 |
|
Alessio Morale
|
104bae01e8
|
OP-994 Exclude alarm for estimated flight time if Capacity setting is 0
+review OPReview-506
|
2013-07-15 20:35:26 +00:00 |
|
Corvus Corax
|
8b6510da4f
|
Made AltitudeOffset for ReturnToHome configurable, Made Failsafe-FlightMode configurable.
|
2013-07-15 09:14:09 +02:00 |
|
Alessio Morale
|
402c84c003
|
OP-994 Added zero calibration settings
+review OPReview-506
|
2013-07-14 20:26:07 +00:00 |
|
Corvus Corax
|
4d28052dd8
|
update configuration check prior to arming control, just in case. Allthough the configuration didn't change, other parameters like the list of running tasks can, which alters the alarms.
|
2013-07-14 06:20:22 +02:00 |
|
Corvus Corax
|
f3a96e5620
|
Bugfixed in fixed wing path follower, high wind situation now succesfully detected
|
2013-07-11 16:22:24 +02:00 |
|
Corvus Corax
|
0ffb2dee02
|
bugfix in pathplanner - 3d distance not calculated correctly
|
2013-07-11 14:35:37 +02:00 |
|
Corvus Corax
|
c1f32e9beb
|
OP-1036: rename some settings and move them in the right place
tags: de-kenzification
|
2013-07-10 15:55:12 +02:00 |
|
Corvus Corax
|
27eadc200b
|
Merge branch 'corvuscorax/lla2nedfilter' into next
Conflicts:
flight/modules/StateEstimation/stateestimation.c
|
2013-07-10 14:38:12 +02:00 |
|
Corvus Corax
|
551780c74b
|
Merge branch 'corvuscorax/complementary_altitude_filter' into next
Conflicts:
flight/targets/boards/revolution/firmware/UAVObjects.inc
|
2013-07-10 14:27:25 +02:00 |
|
Brian Webb
|
c2df59498b
|
Merge remote-tracking branch 'origin/master' into next
|
2013-07-06 07:08:30 -07:00 |
|
Brian Webb
|
6dbecca7a5
|
OP-932 Fixes erasing settings on OPLink and blocks OPLinkSettings objects from being transmitted over the radio.
|
2013-07-05 18:25:52 -07:00 |
|
Corvus Corax
|
0107432e45
|
Added a low pass filter for accels to the altitude filter
|
2013-07-02 23:17:08 +02:00 |
|
Corvus Corax
|
ba87f32812
|
typo fix
|
2013-06-30 19:46:28 +02:00 |
|
Corvus Corax
|
51a4b16af5
|
New Filter to calculate NED from LLA as part of StateEstimation
|
2013-06-30 18:49:29 +02:00 |
|
Corvus Corax
|
2a16c0dbd7
|
removed GPS module ability to calculate NED coordinate (not its job)
|
2013-06-30 16:31:19 +02:00 |
|
Corvus Corax
|
7745f93935
|
changed default coefficients and exposed them to a settings uavobject as they should be
|
2013-06-29 01:16:02 +02:00 |
|
Corvus Corax
|
2621b087a2
|
fixed filter in first bench test tries, works surprisingly well...
|
2013-06-28 21:27:05 +02:00 |
|
Corvus Corax
|
2fb0c0a3ce
|
some uncrustification
|
2013-06-28 19:52:09 +02:00 |
|
Corvus Corax
|
b9038e5ed6
|
new simple complementary filter to calculate current altitude and vertical speed
|
2013-06-28 17:22:16 +02:00 |
|
Brian Webb
|
6386b12026
|
OP-932 Fixes raw serial on UART and USB VCP.
|
2013-06-27 19:16:01 -07:00 |
|
Brian Webb
|
2aea2342ab
|
OP-932 Adds a direct PPM channel on each Tx packet when in PPM mode, and adds a PPM only mode that uses a 9600 bps air datarate. Also updates the OPLink configuration tab and moves all OPLink configuration to the OPLink configuration tab on the Revo, and customizes the OPLink configuration tab for the Revo.
|
2013-06-26 18:01:54 -07:00 |
|
Brian Webb
|
f8d60e6dee
|
OP-932 Adds additional thread and UAVTalk connection to the telemetry module that reads from the uart/radio link on the Revo. This allows the Revo to read OAVObjects over both the uart/radio link and the USB link at the same time. Unfortunately, there's no way to know which link to send UAVObjects out on, so all UAVObjects go to the USB port if USB is connected. This allows UAVObjects to be received from the OPLink radio, even when USB is connected.
|
2013-06-26 17:58:02 -07:00 |
|
Brian Webb
|
774a74884a
|
OP-932 Replaces the RFM22B PPM/receiver code with an OPLinkReceiver UAVObject. This object is generated on a coordinator OPLink, and is used by both the OPLink to generate PPM output, and the OPLinkReceiver on the Revo.
|
2013-06-26 17:57:11 -07:00 |
|
Brian Webb
|
8c370df319
|
OP-932 A significant re-work of the OPLink and configuration of the OPLink. Auto-configuration is removed, and remote modems are bound the coordinator, rather than the other way around. Timing of the radio link is also significantly changed. The rfm22b code is also simplified so that it only sends packet, and has no notion about what those packets are, so the rfm22b is converteded to simply a com type device.
|
2013-06-26 17:56:56 -07:00 |
|
Corvus Corax
|
f2abe1f5c7
|
StateEstimation: removed (not yet implemented) 16 state EKF support for now
|
2013-06-25 19:30:21 +02:00 |
|
Alessio Morale
|
0b8d18ae49
|
OP-994 Move common defines to architecture specific header
+review OPReview-506
|
2013-06-24 18:50:44 +02:00 |
|
Corvus Corax
|
5bdfad4bdb
|
removed redundant check as suggested in review
|
2013-06-23 19:39:00 +02:00 |
|
Corvus Corax
|
e916902c9e
|
changed alarm return states, so cf initialisation will cause visible LED blinks...
|
2013-06-23 19:26:17 +02:00 |
|
Corvus Corax
|
407817f959
|
backport of complementary filter bugfix
|
2013-06-23 18:37:43 +02:00 |
|
Corvus Corax
|
4bf934ae69
|
prevent positionSensor updates if GPS lock is low quality. Sometimes bad updates are worse than no updates.
|
2013-06-22 23:15:10 +02:00 |
|
Corvus Corax
|
3392622d2b
|
backporting change on next to modified Attitude module
|
2013-06-22 23:07:53 +02:00 |
|
Corvus Corax
|
6163c5f53a
|
Merge branch 'next' into corvuscorax/OP-947_stateestimator-module
Conflicts:
flight/modules/AltitudeHold/altitudehold.c
ground/openpilotgcs/share/openpilotgcs/pfd/default/AltitudeScale.qml
ground/openpilotgcs/share/openpilotgcs/pfd/default/PfdIndicators.qml
ground/openpilotgcs/share/openpilotgcs/pfd/default/SpeedScale.qml
ground/openpilotgcs/src/plugins/pfd/pfdgadgetwidget.cpp
|
2013-06-22 18:44:03 +02:00 |
|
Corvus Corax
|
ee1465fd9a
|
OP-1018: Fix ETASv3 Airspeed sensor autocalibration
|
2013-06-22 12:53:23 +02:00 |
|
Alessio Morale
|
57c8cd7872
|
Merge branch 'amorale/OP-1019_simple_altitudehold' into next
|
2013-06-21 17:16:24 +02:00 |
|
Alessio Morale
|
d2893fd32b
|
OP-1019 fix sanitychecks and other uavo definition sanity checks for the newly defined altitudevario mode
|
2013-06-20 19:39:19 +02:00 |
|
Werner Backes
|
e5b68382e0
|
Keep TODO comment.
|
2013-06-20 14:35:40 +02:00 |
|
Werner Backes
|
0f5e354f99
|
Removed first occurance of accel_err scaling. We don't want to do this
twice.
|
2013-06-20 12:42:22 +02:00 |
|