1
0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-10 18:24:11 +01:00
Commit Graph

1153 Commits

Author SHA1 Message Date
Lalanne Laurent
4fabce011a Merged in f5soh/librepilot/LP-204_Fast_invsqrtf_issue (pull request #147)
LP-204 Replace fast_invsqrtf() with invsqrtf() : 1.0f / sqrtf()
2016-01-09 12:59:47 +01:00
Fredrik Arvidsson
bc80c66c2b LP-196 Removed some leftover code and definitions. 2016-01-07 14:22:52 +01:00
Fredrik Arvidsson
359266ab7a LP-104 Removed support for HoTT on Main port on coptercontrol target since it does not work. 2016-01-07 13:01:46 +01:00
Philippe Renon
6b39fc0800 uncrustify 2016-01-04 21:41:45 +01:00
Laurent Lalanne
71a0a563f1 LP-204 Replace fast_invsqrtf() with invsqrtf() : 1.0f / sqrtf() 2015-12-26 14:26:36 +01:00
Fredrik Arvidsson
3e920bc5bc LP-196 Added driver for Jeti EX.Bus protocol. Added support for CopterControl target on Main and Flexi port. This is WIP and not tested yet. 2015-12-26 12:29:04 +01:00
Fredrik Arvidsson
7a95050381 LP-104 Added missing code to receiver.c to detect receiver activity. This probably caused a crash on any activity of the HoTT receiver.
Added 40 bytes to the receiver stack.
Added options to receiver activity.xml uavo definition.
2015-12-20 13:36:45 +01:00
Laurent Lalanne
309f5db956 LP-191 Receiver activity : Increase min range value and allow all Sbus
channels scanning.
2015-12-04 20:36:51 +01:00
Cliff Geerdes
bb04d62756 LP-145 uncrustify and comments 2015-11-15 18:42:47 -05:00
Cliff Geerdes
44a57cb308 LP-145 reduce UBX false positive red X from 1 in 256 NMEA packets to 1 in 64k 2015-11-15 18:13:51 -05:00
Cliff Geerdes
f0ef594cdb LP-145 CC3D GPS reparse and general GPS system health 2015-11-15 03:44:28 -05:00
Laurent Lalanne
2295208abe LP-182 Add empty line before #ifdef and after #endif 2015-11-14 14:27:12 +01:00
Laurent Lalanne
705bd2a483 LP-182 Set telemetry port baudrate settings or still to default 57600. 2015-11-13 15:18:17 +01:00
Alessio Morale
70faa04b0a LP-97 - Move board init function declarations to a pios_board_init.h, fix some headers 2015-11-08 18:47:31 +01:00
Cliff Geerdes
e0a805518f LP-73 uncrustify 2015-10-25 23:59:52 -04:00
Cliff Geerdes
7de55812dd LP-73 changes for pull request comments 2015-10-24 12:09:22 -04:00
Cliff Geerdes
d9b7a0bb00 LP-73 port extmag to all other boards 2015-10-24 12:09:21 -04:00
Cliff Geerdes
b086d1a021 LP-73 ExtMag fix some more watchdog issues 2015-10-24 12:09:20 -04:00
Cliff Geerdes
d4b0d106f8 LP-73 External Mags on I2C initial coding 2015-10-24 12:09:19 -04:00
Stefan Karlsson
51f0b74e5c LP-129 Remove broken motor scaling modes 2015-09-24 23:02:09 +02:00
Stefan Karlsson
2ab6390cf5 LP-128 Fix scaleMotor attitude problems
The ElevateAndCompress scaling mode doesn't scale linearly as intended
and causes motors to reach the max limit prematurely.

A new mode, MoveAndCompress, has been implemented to get better linear
scaling of the motor output values.
2015-09-22 21:25:56 +02:00
Alessio Morale
f3b44ebd50 Merged in alessiomorale/librepilot/amorale/LP-89_port_150501_fixes (pull request #66)
Amorale/lp 89_port_150501_fixes
2015-09-21 12:35:36 +02:00
Alessio Morale
d20d1ab295 LP-89 - Port OP_15.05.01 fixes. Release notes:
--- RELEASE-15.05.01 HOTFIX --- Banana Split ---
This release fixes an important bug.  All Revolution hardware running 15.05 should upgrade to 15.05.01. Note that this is a hotfix; it can
simply be flashed without an erase settings. Furthermore, please review your vtolpathfollowersettings:HorizontalVelMax; a value of around 4m/s would be more appropriate for preliminary trialing of a new release and will be changed in future.

Release Notes - OP Next Generation - Version OP15.05.01

** Bug
    * [NG-55] - 15.05 PositionHold exhibits fly-away behaviour at the vtolpathfollowersettings maxRollPitch and HorizontalVelMax values.
---
 WHATSNEW.txt                                      | 13 ++++++++++-
 flight/libraries/pid/pidcontroldown.cpp           | 26 ++++++++++-----------
 flight/libraries/plans.c                          | 28 +++++++++++++++++++----
 flight/modules/PathFollower/inc/pidcontrolne.h    |  1 -
 flight/modules/PathFollower/pidcontrolne.cpp      | 23 +++++++++++++++----
 flight/modules/PathFollower/vtolflycontroller.cpp | 16 ++++++++-----
 6 files changed, 77 insertions(+), 30 deletions(-)
2015-09-19 16:05:49 +02:00
a*morale
68ecefa0fd LP-124 - Rename Pitch/RollRatePid to EasyTuneRatePitch/Roll, UAVO and firmware fixes 2015-09-19 15:03:17 +02:00
Alessio Morale
b6515a2117 LP-123 - EasyTune for yaw should only be enabled if any other (roll/pitch) option is also enabled 2015-09-19 12:04:37 +02:00
Alessio Morale
3e7a53beaf Merged in f5soh/librepilot/laurent/LP-114_Add_accessory_input_channel (pull request #54)
LP-114 Add accessory input channel
2015-09-15 23:21:04 +02:00
Laurent Lalanne
8885180fde LP-114 Add Accessory3 as input - TxWizard and Multirotor Accessory
mapping
2015-09-11 00:04:31 +02:00
Stefan Karlsson
a7c592b294 LP-115 Fix TPS and Acroplus settings setup
Both TPS and Acroplus had settings initialized in SettingsUpdatedCb.
These values comes from stabSettings.stabBank, which isn't initialzed
when SettingsUpdatedCb is first called.

The patch moves the setup of the affected settings values to
BankUpdatedCb, where other bank specific settings are updated.
2015-09-09 01:27:20 +02:00
Alessio Morale
bc89c79b7d Merged in skarlsso/librepilot/skarlsso/LP-107_scaleMotor_bug (pull request #46)
skarlsso/lp 107_scalemotor_bug
2015-09-08 15:27:51 +02:00
a*morale
792835c009 Uncrustify 2015-09-05 11:49:43 +02:00
Alessio Morale
06f59d2c40 LP-96 - Call CPU idle calibration function from SystemMod 2015-09-03 23:40:35 +02:00
Alessio Morale
b88681c69f LP-97 - Move the common Init process within the System module (coptercontrol/revolution) 2015-09-03 23:40:24 +02:00
Alessio Morale
3eaf1ef3c3 LP-96 - Implement CPU idle counters and calibration functions 2015-09-03 20:05:25 +02:00
Alessio Morale
fb3e65e057 LP-44 - some optimizations and cleanup 2015-09-03 07:26:40 +02:00
Laurent Lalanne
69125e8e9d LP-44 Save RAM : Use float UAVO type only when needed. 184bytes saved 2015-09-03 07:26:06 +02:00
Stefan Karlsson
71f6e82399 LP-107 Use scaleChannel for unscaled motor outputs 2015-09-01 21:17:52 +02:00
Stefan Karlsson
f7b8a57e42 LP-107 Replace the scaling function in scaleMotors
The previous scaling function used in scaleMotor could end up with
output values below the neutral point.

This patch adds a new scaling mode that will try to scale the output
proportionally while still keep all outputs within neutral and max.

The user can select three different modes:
1) NoScaling - Only cap the output values between neutral and max.
2) AddAndSubtract - The previous output scaling method, which moves the
   output values directly proportionally to the amount the max/min motor
    is out of the limits.
3) ElevateAndCompress - The new mode, which elevates all motor values by
   the percentage needed to bring the min motor to neutral, and then
   compress all motor values by the percentage needed to bring the max
   motor down to max.

The motor scaling mode can be selected by setting the
FlightModeSettings.MotorScalingMode UAVO field.
2015-08-31 21:29:48 +02:00
Alessio Morale
538a137bf6 Merged in f5soh/librepilot/laurent/LP-92_Feed_forward_remove (pull request #33)
Laurent/lp 92_feed_forward_remove
2015-08-21 13:35:10 +02:00
Alessio Morale
43ca4b01af Merged in rbekken/librepilot/copyright_update (pull request #32)
Update all changed files against GIT log with copyright headers consistency.
2015-08-21 13:34:37 +02:00
Roy Bekken
ad84547637 Update all changed files against GIT log with copyright headers consistency. 2015-08-19 16:15:58 +02:00
Laurent Lalanne
670dbfe9ce LP-92 Remove Feed Forward : flight / ground 2015-08-14 10:54:12 +02:00
Alessio Morale
74c69e033c LP-67 - Fix checkbox yaw recalc checkbox, allow yaw recalc flag changes to trigger a yaw recalc 2015-08-14 10:24:19 +02:00
Alessio Morale
ee461ff303 LP-67 handle full PIDs terms with a single knob for each axis (roll/pitch).
The new setting will work this way:
- Input (knob) value is used straight as roll or pitch P term;
- P term is mutliplied by two configurable factors and used as D and I terms;
- (Optionally) Yaw P term is calculated from a mean of roll and pitch P terms multiplied by a configurable factor.
- yaw P term is multiplied by other two configurable factors and used as yaw D and I terms.
2015-08-14 10:24:18 +02:00
alessio morale
05494eebcc Merged in f5soh/librepilot/laurent/LP-66_FixedWing_Roll_differential (pull request #9)
LP-66 - Add differential Roll mixing to Fixed Wing frames
2015-07-31 14:38:28 +02:00
Alessio Morale
13f02e7d9d LP-56 - Better txpid option namings, fix tabs-spaces, tooltips. headers, variable namings 2015-07-30 18:23:55 +02:00
Laurent Lalanne
31c30d752f LP-66 Fixed wing : Roll differential mixing on flight side 2015-07-29 06:36:22 +02:00
Alessio Morale
7b3aed3de9 LP-56 - Allows a single txpid instance to handle Roll&Pitch
Also populate combos with current txpid values
2015-07-27 22:45:33 +02:00
Alessio Morale
7973ab9d0a LP-56 - Use separate roll/picth factors and add firmware support 2015-07-25 00:29:41 +02:00
Alessio Morale
711ef272c1 LP-5 - Use a single Task for telemetry when no radio is available 2015-07-16 01:01:02 +02:00
a*morale
1ef9fc51d6 LP-5 - exclude AH from outerloop 2015-07-15 00:07:51 +02:00
abeck70
afc62f61aa OP-1875 add issing AuxMagsSettings initialise call 2015-06-05 17:28:05 +10:00
Corvus Corax
58e0db791c OP-1875 reinit ekf on mag source change 2015-06-04 13:49:42 +02:00
Steve Evans
d41808ecaf Merge branch 'rel-nano-15.05' into steve/OP-1904_Display_current_TxPID_settings_on_OSD 2015-05-30 12:14:47 +01:00
abeck70
c8ff29c404 Merge remote-tracking branch 'origin/steve/OP-1903_Add_TxPID_controls_for_AttitudeSettings' into rel-nano-15.05 2015-05-30 19:31:46 +10:00
abeck70
2ad52f770c REVONANO store thrustdemand before uavo set 2015-05-29 21:45:41 +10:00
abeck70
0ffd9e764d REVONANO fix compile error in vtolbrakefsm 2015-05-29 09:04:59 +10:00
abeck70
78b56b29e0 REVONANO Tuning of altvario and braking 2015-05-28 08:47:26 +10:00
abeck70
0ea8260a87 REVONANO Truely disarm on pathfollower guidance alarm 2015-05-26 17:29:51 +10:00
abeck70
4a78602da2 REVONANO Guidance alarm clearing on change of mode 2015-05-25 22:26:06 +10:00
abeck70
bddb9377a4 REVONANO Land and Takeoff uav changes removing abort state. 2015-05-25 22:25:07 +10:00
abeck70
cdf1b88cc0 REVONANO VelocityRoam fixes
1. New VelocityRoamHorizontalVelPID to allow tuning of VR independent of pathfollower nav modes
2015-05-25 22:24:06 +10:00
abeck70
c5715b26af REVONANO Landing fixes
1. Forced disarm via guidance alarm critical on disarm state
2. Continue to zero stabi including yaw during disarm state just in case it doesn't actually disarm.
2015-05-25 22:21:53 +10:00
abeck70
7d66a075de REVONANO Fixes to AutoTakeoff
1. Fix autoyaw to 0 attitude on takeoff post launch.
2. An error condition abort now properly disarms and continues to contrain thrust and stabi during disarmed state.
3. Increase thrustdown time from 2 to 5 seconds on an error condition (e.g. if 3 m deviation from takeoff position on NE).
2015-05-25 22:19:01 +10:00
abeck70
50d60649aa REVONANO Fix BrakeController to use vtol VerticalVelPID instead of LandVerticalVelPID 2015-05-25 22:13:13 +10:00
abeck70
89b40f3173 REVONANO: Landing and disarming fixes
Also prevent stabi control in land's disarm state
2015-05-25 08:50:33 +10:00
Steve Evans
a0d6de4e1d Merge branch 'rel-nano-15.05' into steve/OP-1904_Display_current_TxPID_settings_on_OSD 2015-05-24 13:00:44 +01:00
abeck70
6d68ed66d9 Merge branch 'steve/OP-1905_Fix_broken_telemetry_if_OPLM_in_PPM_only_mode' into abeck/nano-rc3-fixes 2015-05-24 20:44:31 +10:00
abeck70
d8f6a7827e REVONANO fix velocity mode use of altvario 2015-05-24 20:38:35 +10:00
abeck70
a4cff482b4 REVONANO fix altitudeHoldTask initialisation 2015-05-24 20:38:07 +10:00
abeck70
b89d8813b1 REVONANO Optimise and fix when altvario task is disabled 2015-05-24 20:37:42 +10:00
abeck70
553728ffd8 REVONANO Trial Rate on Yaw during braking instead of AxisLock 2015-05-24 20:36:44 +10:00
abeck70
ba903614c6 REVONANO Improve GPSAssist
I decided to not check throttle when re-enabling stabii control. It can feel as though the mode is defective.  I would rather someone have immediate always-there ability to overridwe gps hold.
2015-05-24 20:34:28 +10:00
Steve Evans
7e2c27671d Merge branch 'steve/OP-1905_Fix_broken_telemetry_if_OPLM_in_PPM_only_mode' into steve/OP-1904_Display_current_TxPID_settings_on_OSD 2015-05-24 10:28:47 +01:00
Steve Evans
4f8ffc612f OP-1905 Fix variable initialisation 2015-05-24 10:24:18 +01:00
Steve Evans
31eae08bba OP-1905 Fix OPLM in PPM mode blocks telemetry stream if no USB connected 2015-05-24 10:18:54 +01:00
Steve Evans
5a9ee46742 OP-1904 Initial commit 2015-05-23 21:55:19 +01:00
Steve Evans
b2dd03cf23 OP-1903 Add AccelTau, AccelKp and AccelKi to TxPID 2015-05-23 14:00:50 +01:00
abeck70
064a5e831b OP-1898 VelocityRoam gets its own MaxRollPitch
This allows smoother velocityroam flight
2015-05-22 21:23:10 +10:00
abeck70
ee43c53cee Merge branch 'rel-nano-15.05' into abeck/OP-1898-VR 2015-05-22 18:46:09 +10:00
abeck70
c0c5cd3d16 OP-1464 uncrustify 2015-05-22 18:36:38 +10:00
abeck70
22b2317732 Merge branch 'theothercliff/OP-1464_Handle_Autobaud_code_for_GPS' into rel-nano-15.05 2015-05-22 18:34:17 +10:00
abeck70
55b3b52c4f OP-1898 VelocityRoam flight mode
Replace PositionRoam with VelocityRoam

Make VelocityRoam an explicit flight mode to simplify access

Disable PositionRoam as not supported and not suitable to retain.
2015-05-22 17:34:43 +10:00
Cliff Geerdes
ced0d4725b OP-1464 Rename things as requested Implement autodisable as advised by Alessio 2015-05-21 04:37:44 -04:00
Cliff Geerdes
55a43d1815 OP-1464 Compile warning discovery Remove AbConfStoreDisable 2015-05-20 01:04:06 -04:00
Cliff Geerdes
244c9e2d5e Merge branch 'rel-15.05' into theothercliff/OP-1464_Handle_Autobaud_code_for_GPS 2015-05-19 21:57:34 -04:00
Cliff Geerdes
3bbe7274ca OP-1464 remove commented out or unused code and pretty it up 2015-05-19 21:34:47 -04:00
Cliff Geerdes
1ade8b7f59 OP-1464 remove debug 2015-05-19 20:45:57 -04:00
Cliff Geerdes
de521c9004 OP-1464 tested version with debug still in place 2015-05-19 19:33:31 -04:00
Cliff Geerdes
92295559b0 OP-1464 GPS autobaud - stash while debugging newobject issue 2015-05-18 18:37:53 -04:00
Alessio Morale
3563b1ff0e REVONANO - Prevent modules to start before init: move most code to pios_initcall.h. System and system-Like modules 2015-05-18 21:29:56 +02:00
Stefan Karlsson
efb6855f6f REVONANO - Various temp fixes debug code to get nano to read from the flash. Code has been added to make the execution of systemTask wait until initTask has completed.
Conflicts:
	flight/pios/common/pios_flashfs_objlist.c
2015-05-18 21:29:56 +02:00
Alessio Morale
375f23ff0c REVONANO - Make debuglog, FlashFS and other bits optional 2015-05-18 18:54:50 +02:00
Laurent Lalanne
3eef68c017 OP-1893 Deadband scale 2015-05-18 16:45:13 +02:00
Alessio Morale
330b396a73 Merge remote-tracking branch 'origin/amorale/OP-1874_notifications_improvements' into HEAD 2015-05-18 10:05:56 +02:00
abeck70
7d603bc6cb OP-1847 gpsassist fix
Set assisted control state to HOLD when Brake controller transitions to HOLD.  This impacts throttle stick behavior as it is different during braking and on brake completion in the hold state.
Also cleanuped and removed unused/old code that triggered HOLD in plans.c
2015-05-16 20:33:03 +10:00
abeck70
5d923c4125 Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into abeck/OP-1847-gps-assist-fixes 2015-05-16 19:57:41 +10:00
abeck70
2c3fcd64d1 Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into laurent/OP-1869_Analog_airspeed_scaling 2015-05-14 20:21:40 +10:00
abeck70
f4d1fc13ec OP-1847 gps assist fixes
1. Update vtol vertical pids
2. Reduce deadband on throttle in gpsassist auto throttle to avoid large deviations in throttle change from neutral
3. Reinitialise assisted control state on mode change where the flight is the same but only gpsassist is going from disabled to enabled or enabled to disabled.
2015-05-14 20:07:07 +10:00
Laurent Lalanne
8e8d08c4a1 OP-1869 "scale" lower case 2015-05-13 21:55:18 +02:00
Steve Evans
1771d347bb Merge branch 'steve/OP-1803_s.bus_dropped_frames' into steve/OP-1849_flexio_com_bridge 2015-05-13 20:36:06 +01:00